Advertisement

Correction to: Analytical Description of the Influence of the Welding Parameters on the Hot Cracking Susceptibility of Laser Beam Welds in Aluminum Alloys

  • Christian HagenlocherEmail author
  • Daniel Weller
  • Rudolf Weber
  • Thomas Graf
Correction
  • 81 Downloads

1 Correction to: METALLURGICAL AND MATERIALS TRANSACTIONS A, VOLUME 50A, NOVEMBER 2019  https://doi.org/10.1007/s11661-019-05430-7

In the original article the indefinite integral sign of the solidification path is missing in Eq. [5].

The correct representation of Eq. [5] is:
$$ \dot{\varepsilon }_{\text{RDG}} = \frac{{ \Delta p_{\text{c}} - v_{\text{T}} \cdot \beta \cdot \mu \cdot \mathop \smallint \nolimits_{{x_{\text{coh}} }}^{{x_{\text{L}} }} \frac{{1 - f_{\text{S}} \left( x \right)}}{K\left( x \right)}{\text{d}}x}}{{\left( {1 + \beta } \right) \cdot \mu \cdot \mathop \smallint \nolimits_{{x_{\text{coh}} }}^{{x_{\text{L}} }} \frac{{\smallint f_{\text{S}} \left( x \right){\text{d}}x}}{K\left( x \right)}{\text{d}}x}} $$

The rest of the paper is not affected by this correction. The results and diagrams in the paper were calculated with the correct equation (including the indefinite integral of the solidification path) and are therefore correct.

Notes

Copyright information

© The Minerals, Metals & Materials Society and ASM International 2019

Authors and Affiliations

  • Christian Hagenlocher
    • 1
    Email author
  • Daniel Weller
    • 1
  • Rudolf Weber
    • 1
  • Thomas Graf
    • 1
  1. 1.Institut für StrahlwerkzeugeUniversity of StuttgartStuttgartGermany

Personalised recommendations