Advertisement

Fatigue Resistance of Laminated and Non-laminated TRIP-maraging Steels: Crack Roughness vs Tensile Strength

  • Zhao Zhang
  • Motomichi Koyama
  • Meimei Wang
  • Cemal Cem Tasan
  • Hiroshi Noguchi
Communication
  • 66 Downloads

Abstract

Pre-cold-rolling before annealing in transformation-induced plasticity (TRIP) maraging steels changes the microstructural morphology from lamellar to granular, increasing the tensile strength. However, fatigue tests of plain specimens at ambient temperature and the stress ratio − 1 show that increased strength does not improve the fatigue strength compared to laminated TRIP-maraging steel, irrespective of stress amplitude. The disappearance of fatigue crack roughness suppresses the improvement in fatigue resistance with increasing strength.

Notes

This work was financially supported by JSPS KAKENHI (JP16H06365, JP17H04956).

Supplementary material

11661_2018_5081_MOESM1_ESM.doc (333 kb)
Supplementary material 1 (DOC 333 kb)

References

  1. 1.
    [1] M. Koyama, Z. Zhang, M. M. Wang, D. Ponge, D. Raabe, K. Tsuzaki, H. Noguchi and C. C. Tasan: Science, 2017, 355(6329), pp. 1055-1057.CrossRefGoogle Scholar
  2. 2.
    [2] R. O. Ritchie: Mater. Sci. Eng. A, 1988, 103(1), pp. 15-28.CrossRefGoogle Scholar
  3. 3.
    [3] H. R. Mayer, S. E. Stanzl‐Tschegg, Y. Sawaki, M. Hühner and E. Hornbogen: Fatigue Fract. Eng. Mater. Struct., 1995, 18(9), pp. 935-948.CrossRefGoogle Scholar
  4. 4.
    [4] S. Suresh: Mater. Sci. Eng. A, 1983, 14(11), pp. 2375-2385.Google Scholar
  5. 5.
    [5] G. T. Gray, J. C. Williams and A. W. Thompson: Mater. Sci. Eng. A, 1983, 14(2), pp. 421-433.Google Scholar
  6. 6.
    [6] Y. Murakami: Metal fatigue: effects of small defects and nonmetallic inclusions, Elsevier. Amsterdam, the Netherlands, 2002.Google Scholar
  7. 7.
    [7] M. M. Wang, C. C. Tasan, D. Ponge and D. Raabe: Acta Mater., 2016, 111, pp. 262-272.CrossRefGoogle Scholar
  8. 8.
    [8] J. C. Pang, S.X. Li, Z.G. Wang and Z.F. Zhang: Mater. Sci. Eng. A, 2013, 564, pp. 331-341.CrossRefGoogle Scholar
  9. 9.
    [9] X. Lin, M. Koyama, S. Gao, N. Tsuji, K. Tsuzaki and H. Noguchi: Int. J. Fatigue, 2019, 118, pp. 117-125.CrossRefGoogle Scholar
  10. 10.
    [10] T. Niendorf, F. Rubitschek, H. J. Maier, D. Canadinc and I. Karaman: J. Mater. Sci., 2010, 45(17), pp. 4813-4821.CrossRefGoogle Scholar
  11. 11.
    [11] S. Hamada, T. Kinoshita, K. Morishige, K. Hayashi, T. Ishina and H. Noguchi: Int. J. Fatigue, 2013, 56, pp. 86-94.CrossRefGoogle Scholar
  12. 12.
    [12] N. Fukumura, T. Suzuki, S. Hamada, K. Tsuzaki and H. Noguchi: Eng. Fract. Mech., 2015, 135, pp. 168-186.CrossRefGoogle Scholar
  13. 13.
    [13] T. Miyazaki, H. Noguchi and K. Ogi: Int. J. Fract., 2004, 129(1), pp. 21-38.CrossRefGoogle Scholar
  14. 14.
    [14] M. M. Wang, C. C. Tasan, D. Ponge, A. Kostka and D. Raabe: Acta Mater., 2014, 79, pp. 268-281.CrossRefGoogle Scholar
  15. 15.
    [15] M. M. Wang, C. C. Tasan, D. Ponge, A. Ch Dippel and D. Raabe: Acta Mater., 2015, 85, pp. 216-228.CrossRefGoogle Scholar
  16. 16.
    Z. Zhang, M. Koyama, M. M. Wang, K. Tsuzaki, C. C. Tasan and H. Noguchi: Int. J. Fatigue, 2017, 100(Part 1), pp. 176-186.CrossRefGoogle Scholar
  17. 17.
    [17] Z. Zhang, M. Koyama, M. M. Wang, K. Tsuzaki, C. C. Tasan and H. Noguchi: Int. J. Fatigue, 2018, 113, pp. 126-136.CrossRefGoogle Scholar
  18. 18.
    [18] H. Suzuki and A. J. Mcevily: Metall. Trans. A, 1979, 10(4), pp. 475-481.CrossRefGoogle Scholar
  19. 19.
    [19] M. Koyama, J.X. Zhou, Y. Yoshida, N. Yoshimura, K. Ushioda and H. Noguchi: ISIJ Int., 2015, 55(11), pp. 2463-2468.CrossRefGoogle Scholar

Copyright information

© The Minerals, Metals & Materials Society and ASM International 2019

Authors and Affiliations

  • Zhao Zhang
    • 1
  • Motomichi Koyama
    • 1
  • Meimei Wang
    • 2
  • Cemal Cem Tasan
    • 3
  • Hiroshi Noguchi
    • 1
  1. 1.Department of Mechanical EngineeringKyushu UniversityFukuokaJapan
  2. 2.Max-Planck-Institut für EisenforschungDüsseldorfGermany
  3. 3.Department of Materials Science and EngineeringMassachusetts Institute of TechnologyCambridgeUSA

Personalised recommendations