Advertisement

Metallurgical and Materials Transactions A

, Volume 50, Issue 3, pp 1346–1357 | Cite as

Martensite-to-Austenite Reversion and Recrystallization in Cryogenically-Rolled Type 321 Metastable Austenitic Steel

  • A. Aletdinov
  • S. MironovEmail author
  • G. F. Korznikova
  • T. Konkova
  • R. G. Zaripova
  • M. M. Myshlyaev
  • S. L. Semiatin
Article
  • 117 Downloads

Abstract

The annealing behavior of cryogenically-rolled type 321 metastable austenitic steel was established. Cryogenic deformation gave rise to martensitic transformation which developed preferentially within deformation bands. Subsequent annealing in the range of 600 °C to 700 °C resulted in reversion of the strain-induced martensite to austenite. At 800 °C, the reversion was followed by static recrystallization. At relatively-low temperatures, the reversion was characterized by a very strong variant selection, which led to the restoration of the crystallographic orientation of the coarse parent austenite grains. An increase in the annealing temperature relaxed the variant-selection tendency and provided subsequent recrystallization thus leading to significant grain refinement. Nevertheless, a significant portion of the original coarse grains was found to be untransformed and therefore the fine-grain structure was fairly heterogeneous.

Notes

Acknowledgments

The present work was partially supported by the Russian Fund for Fundamental Research (Project No. 17-42-020426). The authors would also like to thank P. Klassman for technical assistance during cryogenic rolling.

Supplementary material

11661_2018_5070_MOESM1_ESM.pdf (1.8 mb)
Supplementary material 1 (PDF 1804 kb)

References

  1. 1.
    R. Valiev: Nature Mater., 2004, vol. 8, pp. 511-516.CrossRefGoogle Scholar
  2. 2.
    R. Song, D. Ponge, D. Raabe, J.G. Speer, D.K. Matlock: Mater. Sci. Eng. A, 2006, vol. 441, pp. 1–17.CrossRefGoogle Scholar
  3. 3.
    K.H. Lo, C.H. Shek, J.K.L. Lai: Mater. Sci. Eng. R, 2009, vol. 65, pp. 39–104.CrossRefGoogle Scholar
  4. 4.
    J.W. Brooks, M.H. Loretto, R.E. Smallman: Acta Metall., 1979, vol. 27, pp. 1839-1847.CrossRefGoogle Scholar
  5. 5.
    A.K. De, D.C. Murdock, M.C. Mataya, J.G. Speer, D.K. Matlock: Scripta Mater., 2004, vol. 50, pp. 1445-1449.CrossRefGoogle Scholar
  6. 6.
    T. Suzuki, J. Kojima, K. Suzuki, T. Hashimito, M. Ichihara: Acta Metall., 1977, vol. 25, pp. 1151-1162.CrossRefGoogle Scholar
  7. 7.
    Y.F. Shen, X.X. Li, X. Sun, Y.D. Wang, L. Zuo: Mater. Sci. Eng. A, 2012, vol. 552, pp. 514-522.CrossRefGoogle Scholar
  8. 8.
    P. Mallick, N.K. Tewary, S.K. Ghosh, P.P. Chattopadhyay: Mater. Character., in press.Google Scholar
  9. 9.
    N. Nakada, H. Ito, Y. Matsuoka, T. Tsuchiyama, S. Takaki: Acta Materialia, 2010, vol. 58, pp. 895–903.CrossRefGoogle Scholar
  10. 10.
    I. Shakhova, V. Dudko, A. Belyakov, K. Tsuzaki, R. Kaibyshev: Mater. Sci. Eng. A, 2012, vol. 545, pp. 176-186.CrossRefGoogle Scholar
  11. 11.
    S. Sabooni, F. Karimzadeh, M.H. Enayati, A.H.W. Ngan: Mater. Sci. Eng. A, 2015, vol. 636, pp. 221-230.CrossRefGoogle Scholar
  12. 12.
    G.B. Olson, M. Cohen: Metall. Trans. A, 1975, vol. 6, pp. 791-795.CrossRefGoogle Scholar
  13. 13.
    A. Das, S. Sivaprasad, P.C. Chakraborti, S. Tarafder: Mater. Sci. Eng. A, 2011, vol. 528, pp. 7909-7914.CrossRefGoogle Scholar
  14. 14.
    K. Tomimura, S. Takaki, S. Tanimoto, Y. Tokunaga: ISIJ International, 1991, vol. 31, pp. 721-727CrossRefGoogle Scholar
  15. 15.
    B. RaviKumar, A.K. Singh, B. Mahato, P.K. Defgdfgfg, N.R. Bandyopadhyay, D.K. Bhattacharya: Mater. Sci. Eng. A, 2006, vol. 429, pp. 205–211.CrossRefGoogle Scholar
  16. 16.
    T.-H. Lee, E. Shin, C.-S. Oh, H.-Y. Ha, S.-J. Kim: Acta Mater., 2010, vol. 58, pp. 3173–3186.CrossRefGoogle Scholar
  17. 17.
    L. Bracke, K. Verbeken, L. Kestens, J. Penning: Acta Mater., 2009, vol. 57, pp. 1512–1524.CrossRefGoogle Scholar
  18. 18.
    B. Roy, R. Kumar, J. Das: Mater. Sci. Eng. A, 2015, vol. 631, pp. 241-247.CrossRefGoogle Scholar
  19. 19.
    T.S. Wang, J.P. Peng, Y.W. Gao, F.C. Zhang, T.F. Jing: Mater. Sci. Eng. A, 2005, vol. 407, pp. 84-88.CrossRefGoogle Scholar
  20. 20.
    M. Eskandari, A. Kermanpur, and A. Najafizadeh: Metall. Mater. Trans. A, 2009, vol. 40, pp. 2241-2249.CrossRefGoogle Scholar
  21. 21.
    T.-H. Lee, C.-S. Oh, S.J. Kim, S. Takaki: Acta Mater., 2007, vol. 55, pp. 3649-3662.CrossRefGoogle Scholar
  22. 22.
    H. Shirazi, G. Miyamoto, S. HosseinNedjad, T. Chiba, M. NiliAhmadabadi, T. Furuhara: Acta Mater., 2018, vol. 144, pp. 269-280.CrossRefGoogle Scholar
  23. 23.
    K. Tomimura, S. Takaki, Y. Tokunaga: ISIJ International, 1991, vol. 31, pp. 1431-1437CrossRefGoogle Scholar
  24. 24.
    D-S. Leem, Y-D. Lee, J-H. Jun, C-S. Choi: Scripta Mater., 2001, vol. 45, pp. 767-472.CrossRefGoogle Scholar
  25. 25.
    A. Kisko, A.S. Hamada, J. Talonen, D. Porter, L.P. Karjalainen: Mater. Sci. Eng. A, 2016, vol. 657, pp. 359-370.CrossRefGoogle Scholar
  26. 26.
    X. Zhang, G. Miyamoto, Y. Toji, S. Nambu, T. Koseki, T. Furuhara: Acta Mater., 2018, vol. 144, pp. 601-612.CrossRefGoogle Scholar
  27. 27.
    N. Nakada, Mater. Letter., 2017, vol. 187, pp. 166-169.CrossRefGoogle Scholar
  28. 28.
    J. Jelenkowski: J. Mater. Proc. Technol., 1997, vol. 64, pp. 207-217.CrossRefGoogle Scholar
  29. 29.
    A. Wirth: Micron, 1973, vol. 4, pp. 230-242Google Scholar
  30. 30.
    A.A. Tiamiyu, A.G. Odeshi, J.A. Szpunar: JMEPEG, 2018, vol. 27, pp. 889-904.CrossRefGoogle Scholar
  31. 31.
    N. Nakada, T. Tsuchiyama, S. Takaki, S. Hashizume: ISIJ International, 2007, vol. 47, pp. 1527-1532.CrossRefGoogle Scholar
  32. 32.
    R.D.K. Misra, Z. Zhang, P.K.C. Venkatasurya, M.C. Somani, L.P. Karjalainen: Mater. Sci. Eng. A, 2010, vol. 527, pp. 7779-7792.CrossRefGoogle Scholar
  33. 33.
    V.V. Sagaradze, V.E. Danilchenko, Ph. L’Heritier, V.A. Shabashov: Mater. Sci. Eng. A, 2002, vol. 337, pp. 146-159.CrossRefGoogle Scholar
  34. 34.
    M.C. Somani, P. Juntunen, L.P. Karjalainen, R.D.K. Misra, A. Kyrolainen: Metall. Mater. Trans. A, 2009, vol. 40, pp. 729-744.CrossRefGoogle Scholar
  35. 35.
    V.V. Sagaradze: NanoStructured Mater., 1997, vol. 9, pp. 201-204.CrossRefGoogle Scholar
  36. 36.
    S. Rajasekhara, L.P. Karjalainen, A. Kyröläinen, P.J. Ferreira: Mater. Sci. Eng. A, 2010, vol. 527, pp. 1986–1996.CrossRefGoogle Scholar
  37. 37.
    Y. Lu, B. Hutchinson, D.A. Molodov, G. Gottstein: Acta Mater., 2010, vol. 58, pp. 3079–3090.CrossRefGoogle Scholar
  38. 38.
    M. Klimova, S. Zherebtsov, N. Stepanov, G. Salishchev, D.A. Molodov: Mater. Character., 2017, vol. 132, pp. 20-30.CrossRefGoogle Scholar
  39. 39.
    A.A. Tiamiyu, J.A. Szpunar, A.G. Odeshi, I. Oguocha, M. Eskandari: Metall. Mater. Trans. A, 2017, vol. 48, pp. 5990-6012.CrossRefGoogle Scholar
  40. 40.
    H.A. Rezzei, M.S. Ghazani, B. Eghbali: Mater. Sci. Eng. A, 2018, vol. 736, pp. 364-374.CrossRefGoogle Scholar
  41. 41.
    M.G. Shahri, S.R. Hosseini, M. Salehi: Acta Metall. Sin., 2015, vol. 28, pp. 499-504.CrossRefGoogle Scholar
  42. 42.
    V.M.A. Silva, C.G. Camerini, J.M. Pardal, J.C.G. de Blas, G.R. Perera: J. Mater. Res. Technol., 2018, vol. 7, pp. 395-401.CrossRefGoogle Scholar
  43. 43.
    G. Korznikova, S. Mironov, T. Konkova, A. Aletdinov, R. Zaripova, M. Myshlyaev, S.L. Semiatin: Metall. Mater. Trans. A, 2018, vol. 49, pp. 6325-6336.CrossRefGoogle Scholar
  44. 44.
    A. Stormvinter, G. Miyamoto, T. Furuhara, P. Hedstrom, A. Borgenstam: Acta Mater., 2012, vol. 60, pp. 7265-7274.CrossRefGoogle Scholar
  45. 45.
    Y. Tomota, Y. Morioka, W. Nakagawara: Acta Mater., 1998, vol. 46, pp. 1419-1426.CrossRefGoogle Scholar
  46. 46.
    K.B. Guy, E.P. Butler, D.R.F. West: Met. Sci., 1983, vol. 17, pp. 167-176.CrossRefGoogle Scholar
  47. 47.
    G.S. Sun, L.X. Du, J. Hu, R.D.K. Misra: Mater. Sci. Eng. A, 2018, vol. 709, pp. 254-264.CrossRefGoogle Scholar
  48. 48.
    M. Odnobokova, A. Belyakov, N. Enikeev, D.A. Molodov, R. Kaibyshev: Mater. Sci. Eng. A, 2017, vol. 689, pp. 370-383.CrossRefGoogle Scholar
  49. 49.
    M. Nezakat, H. Akhiani, S.M. Sabet, J. Szpunar: Mater. Character., 2017, vol. 123, pp. 115–127.CrossRefGoogle Scholar
  50. 50.
    M. Nezakat, H. Akhiani, M. Hoseini, J. Szpunar: Mater. Character., 2014, vol. 98, pp. 10–17.CrossRefGoogle Scholar
  51. 51.
    T. Konkova, S. Mironov, A. Korznikov, S.L. Semiatin: Mater. Sci. Eng. A, 2011, vol. 528, pp. 7432– 7443.CrossRefGoogle Scholar
  52. 52.
    J. Hirsch, K. Lucke: Acta Metall., 1988, vol. 36, pp. 2863-2882.CrossRefGoogle Scholar
  53. 53.
    F.J. Humphreys, M. Hatherly: Recrystallization and related phenomena, 2nd ed., Elsevier, Oxford, 2000Google Scholar
  54. 54.
    D.P. Field: Ultramicroscopy, 1997, vol. 67, pp. 1-9.CrossRefGoogle Scholar

Copyright information

© The Minerals, Metals & Materials Society and ASM International 2018

Authors and Affiliations

  • A. Aletdinov
    • 1
  • S. Mironov
    • 2
    Email author
  • G. F. Korznikova
    • 1
  • T. Konkova
    • 1
    • 3
  • R. G. Zaripova
    • 4
  • M. M. Myshlyaev
    • 5
    • 6
  • S. L. Semiatin
    • 7
  1. 1.Institute for Metals Superplasticity ProblemsRussian Academy of ScienceUfaRussia
  2. 2.Belgorod National Research UniversityBelgorodRussia
  3. 3.University of StrathclydeGlasgowUK
  4. 4.Ufa State Aviation Technical UniversityUfaRussia
  5. 5.Baikov Institute of Metallurgy and Material ScienceRussian Academy of ScienceMoscowRussia
  6. 6.Institute of Solid State PhysicsRussian Academy of SciencesMoscow OblastRussia
  7. 7.Air Force Research Laboratory, Materials and Manufacturing Directorate, AFRL/RXCMWright-Patterson AFBDaytonUSA

Personalised recommendations