Advertisement

Ionics

pp 1–9 | Cite as

High sulfur loading application with the assistance of an extremely light-weight multifunctional layer on the separator for lithium-sulfur batteries

  • Xiang-yun QiuEmail author
  • Qing-song HuaEmail author
  • Zuo-qiang Dai
  • Zong-min Zheng
  • Fa-jie Wang
  • Hong-xin Zhang
Original Paper
  • 22 Downloads

Abstract

For high-energy density lithium-sulfur (Li-S) batteries, the effective active material loading, cyclic stability, and modification hardly any effect on energy density are crucial factors, but these three indicators seem contradictory in most case. In this paper, cells with a high sulfur loading, 4.3 mg cm−2, demonstrate excellent performances with the assistance of reduced graphene oxide (rGO) modified on the separator, and the density of modified layer is only 0.1 mg cm−2, which is hardly any effect on energy density. Moreover, in order to understand the improvement mechanism of the modified layer, graphene oxide (GO) modified layer is also to be applied for comparison, which is also helpful to establish cognition to select other modification layers. Most important of all, the application of high sulfur loading is generally required for practical Li-S batteries and the extremely light-weight modified layer is beneficial to the exertion of the whole energy density.

Keywords

Lithium-sulfur batteries Multifunction separator Reduced graphene oxide High sulfur loading 

Notes

Funding information

This work was supported by “China Postdoctoral Science Foundation” (2018M632616), “Qingdao Postdoctoral Applied Research Project,” “National Natural Science Foundation of China” (201805146), and “Natural Science Foundation of Shandong Province” (ZR201709240128).

References

  1. 1.
    Armand M, Tarascon JM (2008) Building better batteries. Nature 451:652–657PubMedCrossRefGoogle Scholar
  2. 2.
    Xu RC, Xia XH, Zhang SZ, Xie D, Wang XL, Tu JP (2018) Interfacial challenges and progress for inorganic all-solid-state lithium batteries. Electrochim Acta 284:177–187CrossRefGoogle Scholar
  3. 3.
    He ZJ, Tang LB, Wang JL, An CS, Xiao B, Zheng CJ (2018) Synthesis and characterization of a sulfur/TiO2 composite for Li-S battery. Ionics 25:9–15CrossRefGoogle Scholar
  4. 4.
    Peng XX, Lu YQ, Zhou LL, Sheng T, Shen SY, Liao HG, Huang L, Li JT, Sun SG (2017) Graphitized porous carbon materials with high sulfur loading for lithium-sulfur batteries. Nano Energy 32:503–510CrossRefGoogle Scholar
  5. 5.
    Wang J, Fu CM, Wang XF, Yao YM, Sun ML, Wang LN, Liu TX (2018) Three-dimensional hierarchical porous TiO2/graphene aerogels as promising anchoring materials for lithium-sulfur batteries. Electrochim Acta 292:568–574CrossRefGoogle Scholar
  6. 6.
    Aurbach D, Pollak E, Elazari R, Salitra G, Kelley CS, Affinito J (2009) On the surface chemical aspects of very high energy density, rechargeable Li-sulfur batteries. J Electrochem Soc 156:A694–A702CrossRefGoogle Scholar
  7. 7.
    Xiao L, Cao Y, Xiao J, Schwenzer BM, Engelhard H, Saraf LV, Nie Z, Exarhos GJ, Liu J (2012) A soft approach to encapsulate sulfur: polyaniline nanotubes for lithium-sulfur batteries with long cycle life. Adv Mater 24:1176–1181PubMedCrossRefGoogle Scholar
  8. 8.
    Yin YX, Xin S, Guo YG, Wan LJ (2013) Lithium-sulfur batteries: electrochemistry, materials, and prospects. Angew Chem Int Ed 52:13186–13200CrossRefGoogle Scholar
  9. 9.
    Seh ZW, Li W, Cha JJ, Zheng G, Yang Y, McDowell MT, Hsu PC, Cui Y (2013) Sulphur-TiO2 yolk-shell nanoarchitecture with internal void space for long-cycle lithium-sulphur batteries. Nat Commun 4:1331–1336CrossRefGoogle Scholar
  10. 10.
    Fang RP, Zhao SY, Sun ZH, Wang DW, Cheng HM, Li F (2017) More reliable lithium-sulfur batteries: status, solutions and prospects. Adv Mater 29:1606823CrossRefGoogle Scholar
  11. 11.
    Wang AX, Xu GY, Ding B, Chang Z, Wang Y, Dou H, Zhang XG (2017) Highly conductive and lightweight composite film as polysulfide reservoir for high-performance lithium-sulfur batteries. ChemElectroChem 4:362–368CrossRefGoogle Scholar
  12. 12.
    Jozwiuk A, Sommer H, Janek J (2015) Fair performance comparison of different carbon Zblacks in lithium-sulfur batteries with practical mass loading – simple design competes with complex cathode architecture. J Power Sources 296:454–461CrossRefGoogle Scholar
  13. 13.
    Yuan GH, Wang HD (2014) Facile synthesis and performance of polypyrrole-coated sulfur nanocomposite as cathode materials for lithium/sulfur batteries. J Nat Gas Chem 23:657–661Google Scholar
  14. 14.
    Zhang Y, Wang LZ, Zhang AQ (2010) Novel V2O5/S composite cathode material for the advanced secondary lithium batteries. Solid State Ionics 181:835–838CrossRefGoogle Scholar
  15. 15.
    Demircakan R, Morcrette M, Gangulibabu A, Gueguen A, Dedryvere R, Tarascon JM (2013) Li-S batteries: simple approaches for superior performance. Energy Environ Sci 6:176–182CrossRefGoogle Scholar
  16. 16.
    Chen SQ, Sun B, Xie XQ, Mondal AK, Huang XD, Wang GX (2015) Multi-chambered micro/mesoporous carbon nanocubes as new polysulfides reservoirs for lithium-sulfur batteries with long cycle life. Nano Energy 16:268–280CrossRefGoogle Scholar
  17. 17.
    Lin S, Cai YR, Yang J, Ruan FX, Wu J, Sireesh BB, Yao X, Gao JK, Yao JM (2019) Entrapment of polysulfides by a Ketjen Black & mesoporous TiO2 modified glass fiber separator for high performance lithium-sulfur batteries. J Alloys Compd 779:412–419CrossRefGoogle Scholar
  18. 18.
    Zhang ZA, Wang GC, Lai YQ (2015) Nitrogen-doped porous hollow carbon sphere-decorated separators for advanced lithium-sulfur batteries. J Power Sources 300:157–163CrossRefGoogle Scholar
  19. 19.
    Gu MS, Lee J, Kim Y (2014) Inhibiting the shuttle effect in lithium-sulfur batteries using a layer-by-layer assembled ion-permselective separator. RSC Adv 4:46940–46946CrossRefGoogle Scholar
  20. 20.
    Huang JQ, Zhuang TZ, Zhang Q, Peng HJ, Chen CM, Wei F (2015) Permselective graphene oxide membrane for highly stable and anti-self-discharge lithium-sulfur batteries. ACS Nano 9:3002–3011PubMedCrossRefPubMedCentralGoogle Scholar
  21. 21.
    Agostini M, Hassoun JA (2015) Lithium-ion sulfur battery using a polymer polysulfide-added membrane. Sci Rep 5:7591PubMedPubMedCentralCrossRefGoogle Scholar
  22. 22.
    Nagao M, Hayashi A, Tatsumisago M (2013) In situ SEM study of a lithium deposition and dissolution mechanism in a bulk-type solid-state cell with a Li2S-P2S5 solid electrolyte. Phys Chem Chem Phys 15:18600PubMedCrossRefPubMedCentralGoogle Scholar
  23. 23.
    Nagao M, Hayashi A, Tatsumisago M (2013) Electrochemical performance of all-solid-state Li/S batteries with sulfur-based composite electrodes prepared by mechanical milling at high temperature. Energy Technol 1:186–192CrossRefGoogle Scholar
  24. 24.
    Yan Y, Yin YX, Xin S (2013) High-safety lithium-sulfur battery with prelithiated Si/C anode and ionic liquid electrolyte. Electrochim Acta 91:58–61CrossRefGoogle Scholar
  25. 25.
    Miao RR, Yang J, Feng XJ, Jia H, Wang JL, Nuli YN (2014) Novel dual-salts electrolyte solution for dendrite-free lithium-metal based rechargeable batteries with high cycle reversibility. J Power Sources 271:291–297CrossRefGoogle Scholar
  26. 26.
    Yao M, Okuno K, Iwaki T, Awazu T, Sakai T (2010) Long cycle-life LiFePO4/Cu-Sn lithium ion battery using foam-type three-dimensional current collector. J Power Sources 195:2077–2081CrossRefGoogle Scholar
  27. 27.
    Chung SH, Manthiram (2013) A Lithium-sulfur batteries with superior cycle stability by employing porous current collectors. Electrochim Acta 107:569-576CrossRefGoogle Scholar
  28. 28.
    Wang L, He XM, Li JJ, Gao J, Fang M, Tian GY, Wang JL, Fan SS (2013) Graphene-coated plastic film as current collector for lithium/sulfur batteries. J Power Sources 239:623–627CrossRefGoogle Scholar
  29. 29.
    Zhang YJ, Liu XY, Bai WQ (2014) Magnetron sputtering amorphous carbon coating on metallic lithium: towards promising anodes for lithium secondary batteries. J Power Sources 266:43–50CrossRefGoogle Scholar
  30. 30.
    Hagen M, Quiroga-Gonzalez E, Dorfler S, Fahrer G, Tubke J, Hoffmann MJ, Althues H, Speck R, Krampfert M, Kaskel S, Foll H (2014) Studies on preventing Li dendrite formation in Li-S batteries by using pre-lithiated Si microwire anodes. J Power Sources 248:1058–1066CrossRefGoogle Scholar
  31. 31.
    Chang AP, Wu QS, Du X, Chen SM, Shen J, Song QY, Xie JD, Wu WT (2016) Immobilization of sulfur in microgels for lithium-sulfur battery. Chem Commun 52:4525–4528CrossRefGoogle Scholar
  32. 32.
    Zeng FL, Wang WK, Wang AB, Yuan KG, Jin ZQ, Yang YS (2015) Multidimensional polycation β-cyclodextrin polymer as an effective aqueous binder for high sulfur loading cathode in lithium-sulfur batteries. ACS Appl Mater Interfaces 7:26257–26265PubMedCrossRefGoogle Scholar
  33. 33.
    Hagen M, Hanselmann D, Ahlbrecht K, Mara R, Gerber D, Tubke J (2015) Lithium-sulfur cells: the gap between the state-of-the-art and the requirements for high energy battery cells. Adv Energy Mater 5:1401986CrossRefGoogle Scholar
  34. 34.
    Zhu P, Zang J, Zhu JD, Lu Y, Chen C, Jiang MJ, Yan CY, Dirican M, Selvan RK, Kim D, Zhang XW (2018) Effect of reduced graphene oxide reduction degree on the performance of polysulfide rejection in lithium-sulfur batteries. Carbon 126:594–600CrossRefGoogle Scholar
  35. 35.
    Song RS, Fang RP, Wen L, Shi Y, Wang SG, Li F (2016) A trilayer separator with dual function for high performance lithium-sulfur batteries. J Power Sources 301:179–186CrossRefGoogle Scholar
  36. 36.
    Han P, Manthiram A (2017) Boron- and nitrogen-doped reduced graphene oxide coated separators for high-performance Li-S batteries. J Power Sources 369:87–94CrossRefGoogle Scholar
  37. 37.
    Fan CY, Yuan HY, Li HH, Wang HF, Li WL, Sun HZ, Wu XL, Zhang JP (2016) The effective design of polysulfides trapped separator at the molecular level for high-energy-density Li-S batteries. ACS Appl Mater Interfaces 8:16108–16115PubMedCrossRefGoogle Scholar
  38. 38.
    Huang JQ, Xu ZL, Abouali S, Garakani MA, Kim JK (2016) Porous graphene oxide/carbon nanotube hybrid films as interlayer for lithium-sulfur batteries. Carbon 99:624–632CrossRefGoogle Scholar
  39. 39.
    Zhuang TZ, Huang JQ, Peng HJ, He LY, Cheng XB, Chen CM, Zhang Q (2016) Rational integration of polypropylene/graphene oxide/nafion as ternary-layered separator to retard the shuttle of polysulfides for lithium-sulfur batteries. Small 12:381–389PubMedCrossRefPubMedCentralGoogle Scholar
  40. 40.
    Li HP, Sun LCG, Zhang Y, Tan TZ, Wang GK, Bakenov Z (2017) Enhanced cycle performance of Li/S battery with the reduced graphene oxide/activated carbon functional interlayer. J Energy Chem 26:1276–1281CrossRefGoogle Scholar
  41. 41.
    Peng HJ, Wang DW, Huang JQ, Cheng XB, Yuan Z, Wei F, Zhang Q (2016) Janus separator of polypropylene-supported cellular graphene framework for sulfur cathodes with high utilization in lithium-sulfur batteries. Adv Sci 3:1500268CrossRefGoogle Scholar
  42. 42.
    Tang Q, Li HQ, Pan YY, Zhang J, Lin ZW, Chen Y, Shu X, Qi WY (2018) TiN synergetic with micro-/mesoporous carbon for enhanced performance lithium-sulfur batteries. Ionics 24:2983–2993CrossRefGoogle Scholar
  43. 43.
    Stankovich S, Dikin DA, Dommett GHB, Kohlhaas KM, Zimney EJ, Stach EA, Piner RD, Nguyen ST, Ruoff RS (2006) Graphene-based composite materials. Nature 442:282–286PubMedCrossRefGoogle Scholar
  44. 44.
    Jiang Y, Chen F, Gao Y, Wang Y, Wang S, Gao Q, Jiao Z, Zhao B, Chen Z (2017) Inhibiting the shuttle effect of Li-S battery with a graphene oxide coating separator: performance improvement and mechanism study. J Power Sources 342:929–938CrossRefGoogle Scholar
  45. 45.
    Zhai PY, Peng HJ, Cheng XB, Zhu L, Huang JQ, Zhu W, Zhang Q (2017) Scaled-up fabrication of porous-graphene-modified separators for high-capacity lithium-sulfur batteries. Energy Storage Mater 7:56–63CrossRefGoogle Scholar
  46. 46.
    Knop O, Boyd RJ, Choi SC (1988) S-S bond lengths, or can a bond length be estimated from a single parameter? J Am Chem Soc 110:7299–7301CrossRefGoogle Scholar
  47. 47.
    Boldyrev AI, Simons J, Schleyer PV (1993) Ab initio study of the electronics structures of lithium containing diatomic molecules and ions. J Chem Phys 99:8793–8804CrossRefGoogle Scholar
  48. 48.
    Su YS, Manthiram A (2012) Lithium-sulphur batteries with a microporous carbon paper as a bifunctional interlayer. Nat Commun 3:1166–1171PubMedCrossRefGoogle Scholar
  49. 49.
    Qiu XY, Zhuang QC, Zhang QQ, Cao R, Ying PZ, Qiang YH, Sun SG (2012) Electrochemical and electronic properties of LiCoO2 cathode investigated by galvanostatic cycling and EIS. Phys Chem Chem Phys 14:2617–2630PubMedCrossRefGoogle Scholar
  50. 50.
    Wu K, Yang J, Qiu XY, Xu JM, Zhang QQ, Jin J, Zhuang QC (2013) Study of spinel Li4Ti5O12 electrode reaction mechanism by electrochemical impedance spectroscopy. Electrochim Acta 108:841–851CrossRefGoogle Scholar
  51. 51.
    Qiu XY, Zhuang QC, Zhang QQ, Cao R, Qiang YH, Ying PZ, Sun SG (2012) Investigation of layered LiNi1/3Co1/3Mn1/3O2 cathode of lithium ion battery by electrochemical impedance spectroscopy. J Electroanal Chem 687:35–44CrossRefGoogle Scholar
  52. 52.
    Canas NA, Hirose K, Pascucci B, Wagner N, Friedrich KA, Hiesgen R (2013) Investigations of lithium-sulfur batteries using electrochemical impedance spectroscopy. Electrochim Acta 97:42–51CrossRefGoogle Scholar
  53. 53.
    Deng ZF, Zhang ZA, Lai YQ, Liu J, Li J, Liu YX (2013) Electrochemical impedance spectroscopy study of a lithium/sulfur battery: modelling and analysis of capacity fading. J Electrochem Soc 160:A553–A558CrossRefGoogle Scholar
  54. 54.
    Kang WM, Deng NP, Ju JG, Li QX, Wu DY, Ma XM, Li L, Naebe M, Cheng B (2016) A review of recent developments in rechargeable lithium-sulfur batteries. Nanoscale 8:16541–16588PubMedCrossRefPubMedCentralGoogle Scholar

Copyright information

© Springer-Verlag GmbH Germany, part of Springer Nature 2019

Authors and Affiliations

  • Xiang-yun Qiu
    • 1
    • 2
    Email author
  • Qing-song Hua
    • 1
    • 2
    Email author
  • Zuo-qiang Dai
    • 1
    • 2
  • Zong-min Zheng
    • 1
    • 2
  • Fa-jie Wang
    • 1
    • 2
  • Hong-xin Zhang
    • 1
    • 2
  1. 1.Power & Energy Storage System Research Center, School of Mechanical and Electrical EngineeringQingdao UniversityQingdaoP.R. China
  2. 2.National Engineering Research Center for Intelligent Electrical Vehicle Power System (Qingdao)QingdaoP.R. China

Personalised recommendations