Ionics

pp 1–10 | Cite as

A performance comparison of protective silicate-coated lead and non-coated lead electrodes in various kind electrolytes of gel valve-regulated lead-acid battery

Original Paper
  • 25 Downloads

Abstract

A novel silicate-based protective film was formed on negative electrodes and compared of the performance in various electrolyte systems of lead-acid batteries. The sodium silicate-based coating for the negative electrode component of a gel valve-regulated lead-acid (gel-VRLA) battery was applied for the first time in the literature. The battery system was produced by sodium silicate-coated negative electrodes and lead oxide positive electrodes in various kinds of electrolyte. Electrochemical characterization of cells and battery prototypes were done by cyclic voltammetric (CV) analysis, electrochemical impedance spectroscopic (EIS) analysis, and cyclic charge-discharge tests. The surface morphologies of silicate-coated electrodes were investigated by scanning electron microscopic analysis after cyclic voltammetric analysis and charge-discharge tests. The coating of silicate on the surface of negative electrodes increased the corrosion resistance of a VRLA battery according to the Tafel polarization curves. Indeed, sulfation on the negative electrode component of the battery have significantly reduced with silicate coatings of them. Besides, the prepared novel silicate-based protective film have increased the battery performance of a VRLA. Silicate-based coatings for electrodes can be used for industrial battery production for many different battery types due to their amazing anti-corrosion properties in acidic media.

Keywords

VRLA battery Sodium silicate Protective film Charge-discharge tests Gel electrolyte 

Notes

Acknowledgements

This work was supported by the SAN-TEZ program (No. 00897.STZ.2011-1) of Ministry of Science, Industry and Technology, Republic of Turkey, with Anadolu University, and Ericsson Turkey. Y. Şahin thanks Prof. Dr. Kadir Pekmez, Prof. Dr. Ender Suvacı, and Oktay Uysal for their support to this study. M. Gençten thanks TUBİTAK-BİDEB.

References

  1. 1.
    Lukic SM, Cao J, Bansal RC et al (2008) Energy storage systems for automotive applications. IEEE Trans Ind Electron 55:2258–2267CrossRefGoogle Scholar
  2. 2.
    Newnham RH, Baldsing WGA (1997) Performance of flooded- and gelled-electrolyte lead/acid batteries under remote-area power-supply duty. J Power Sources 66:27–39CrossRefGoogle Scholar
  3. 3.
    Chang Y, Mao X, Zhao Y, Feng S, Chen H, Finlow D (2009) Lead-acid battery use in the development of renewable energy systems in China. J Power Sources 191:176–183CrossRefGoogle Scholar
  4. 4.
    Daniel C, Besenhard JO (2011) Handbook of battery materials: Second Edition. Handb Batter Mater Second EdGoogle Scholar
  5. 5.
    Hernández JC, Soria ML, González M, García-Quismondo E, Muñoz A, Trinidad F (2006) Studies on electrolyte formulations to improve life of lead acid batteries working under partial state of charge conditions. J Power Sources 162:851–863CrossRefGoogle Scholar
  6. 6.
    Tian X, Gong Y, Wu Y, Agyeiwaa A, Zuo T (2014) Management of used lead acid battery in China: secondary lead industry progress, policies and problems. Resour Conserv Recycl 93:75–84CrossRefGoogle Scholar
  7. 7.
    Bernardes AM, Espinosa DCR, Tenorio JAS (2004) Recycling of batteries: a review of current processes and technologies. J Power Sources 130:291–298CrossRefGoogle Scholar
  8. 8.
    Genaidy AM, Sequeira R, Tolaymat T et al (2008) An exploratory study of lead recovery in lead-acid battery lifecycle in US market: an evidence-based approach. Sci Total Environ 407:7–22CrossRefGoogle Scholar
  9. 9.
    Chen HY, Li AJ, Finlow DE (2009) The lead and lead-acid battery industries during 2002 and 2007 in China. J Power Sources 191:22–27CrossRefGoogle Scholar
  10. 10.
    Tantichanakul T, Chailapakul O, Tantavichet N (2011) Gelled electrolytes for use in absorptive glass mat valve-regulated lead-acid (AGM VRLA) batteries working under 100% depth of discharge conditions. J Power Sources 196:8764–8772CrossRefGoogle Scholar
  11. 11.
    Gençten M, Dönmez KB, Şahin Y, Pekmez K, Suvacı E (2014) Voltammetric and electrochemical impedimetric behavior of silica-based gel electrolyte for valve-regulated lead-acid battery. J Solid State Electrochem 18(2014):2469–2479CrossRefGoogle Scholar
  12. 12.
    Dönmez KB, Gençten M, Şahin Y (2017) A novel polysiloxane-based polymer as a gel agent for gel–VRLA batteries. Ionics (Kiel) 23:2077–2089CrossRefGoogle Scholar
  13. 13.
    Lambert DWH, Greenwood PHJ, Reed MC (2002) Advances in gelled-electrolyte technology for valve-regulated lead-acid batteries. J Power Sources 107:173–179CrossRefGoogle Scholar
  14. 14.
    Tang Z, Wang J, xian MX et al (2007) Investigation and application of polysiloxane-based gel electrolyte in valve-regulated lead-acid battery. J Power Sources 168:49–57CrossRefGoogle Scholar
  15. 15.
    Vinod MP, Vijayamohanan K (2000) Effect of gelling on the impedance parameters of Pb/PbSO4 electrode in maintenance-free lead-acid batteries. J Power Sources 89:88–92CrossRefGoogle Scholar
  16. 16.
    Vinod MP, Vijayamohanan K, Joshi SN (1998) Effect of silicate and phosphate additives on the kinetics of the oxygen evolution reaction in valve-regulated lead/acid batteries. J Power Sources 70:103–105CrossRefGoogle Scholar
  17. 17.
    Vinod MP, Mandle AB, Sainkar SR, Vijayamohanan K (1997) Effect of gelling on the surface structure of a porous lead electrode in sulfuric acid. Langmuir 27:462–468Google Scholar
  18. 18.
    Bergna HE, Colloid T (1994) The colloid chemistry of silica. Advances 234:695Google Scholar
  19. 19.
    Prengaman RD (2001) Challenges from corrosion-resistant grid alloys in lead acid battery manufacturing. J Power Sources 95:224–233CrossRefGoogle Scholar
  20. 20.
    Ruetschi P (2004) Aging mechanisms and service life of lead-acid batteries. J Power Sources 127:33–44CrossRefGoogle Scholar
  21. 21.
    Lopez-Garrity O, Frankel GS (2014) Synergistic corrosion inhibition of AA2024-T3 by sodium silicate and sodium molybdate. ECS Electrochem Lett 3:C33–C35CrossRefGoogle Scholar
  22. 22.
    Lopez-Garrity O, Frankel GS (2014) Corrosion inhibition of aa2024-t3 by sodium silicate. Electrochim Acta 130:9–21CrossRefGoogle Scholar
  23. 23.
    Lopez-Garrity O, Frankel GS (2014) Corrosion inhibition of aluminium alloy 2024-T3 by sodium molybdate. J Electrochem Soc 3:C95–C106Google Scholar
  24. 24.
    rong YM, J tang L, Kong G (2010) Effect of SiO2:Na2O molar ratio of sodium silicate on the corrosion resistance of silicate conversion coatings. Surf Coatings Technol 204:1229–1235CrossRefGoogle Scholar
  25. 25.
    Lin B l., Lu J tang, Kong G (2008) Synergistic corrosion protection for galvanized steel by phosphating and sodium silicate post-sealing. Surf Coatings Technol 202:1831–1838CrossRefGoogle Scholar
  26. 26.
    Şahin Y, Dönmez KB, Gençten M, et al (2016) Sodyum silikat temelli membran ile kaplı bir elektrot ve üretim yöntemi, Turkish patent and trademark office Patent no: 201402946Google Scholar
  27. 27.
    Hämeenoja E, Laitinen T, Sundholm G, Yli-Pentti A (1989) The growth of oxide layers on lead and its alloys at a constant potential in the PbO2 potential region at different temperatures. Electrochim Acta 34:233–241CrossRefGoogle Scholar
  28. 28.
    Bullock KR (2010) Carbon reactions and effects on valve-regulated lead-acid (VRLA) battery cycle life in high-rate, partial state-of-charge cycling. J Power Sources 195:4513–4519CrossRefGoogle Scholar
  29. 29.
    Muneret X, Gobé V, Lemoine C (2005) Influence of float and charge voltage adjustment on the service life of AGM VRLA batteries depending on the conditions of use. J Power Sources 144:322–328CrossRefGoogle Scholar
  30. 30.
    Pavlov D, Papazov G, Monahov B (2003) Strap grid tubular plate—a new positive plate for lead-acid batteries. Processes of residual sulphation of the positive plate In: J Power Sources 113:255–270Google Scholar
  31. 31.
    Wu L, Chen HY, Jiang X (2002) Effect of silica soot on behaviour of negative electrode in lead-acid batteries. J Power Sources 107:162–166CrossRefGoogle Scholar
  32. 32.
    Gencten M, Gursu H, Sahin Y (2017) Effect of α- and γ-alumina on the precipitation of positive electrolyte in vanadium redox battery. Int J Hydrog Energy 42:25598–25607CrossRefGoogle Scholar
  33. 33.
    Gencten M, Gursu H, Sahin Y (2017) Anti-precipitation effects of TiO2 and TiOSO4 on positive electrolyte of vanadium redox battery. Int J Hydrogen Energy Int J Hydrogen Energy 42:25608–25618CrossRefGoogle Scholar
  34. 34.
    Gençten M, Gürsu H, Şahin Y (2015) Electrochemical investigation of the effects of V(V) and sulfuric acid concentrations on positive electrolyte for vanadium redox flow battery. Int J Hydrog Energy 41:9868–9875CrossRefGoogle Scholar
  35. 35.
    Pavlov D, Petkova G, Rogachev T (2008) Influence of H2SO4 concentration on the performance of lead-acid battery negative plates. J Power Sources 175:586–594CrossRefGoogle Scholar
  36. 36.
    Pavlov D, Naidenov V, Ruevski S (2006) Influence of H2SO4 concentration on lead-acid battery performance. H-type and P-type batteries J Power Sources 161:658–665Google Scholar
  37. 37.
    Pavlov D, Petkova G, Dimitrov M, Shiomi M, Tsubota M (2000) Influence of fast charge on the life cycle of positive lead-acid battery plates. J Power Sources 87:39–56CrossRefGoogle Scholar
  38. 38.
    Calábek M, Micka K, Křivák P, Bača P (2006) Significance of carbon additive in negative lead-acid battery electrodes. J Power Sources 158:864–867CrossRefGoogle Scholar
  39. 39.
    Zhang B, Zhong J, Li W, Dai Z, Zhang B, Cheng Z (2010) Transformation of inert PbSO4 deposit on the negative electrode of a lead-acid battery into its active state. J Power Sources 195:4338–4343CrossRefGoogle Scholar
  40. 40.
    Pavlov D, Nikolov P, Rogachev T (2011) Influence of carbons on the structure of the negative active material of lead-acid batteries and on battery performance. J Power Sources 196:5155–5167CrossRefGoogle Scholar
  41. 41.
    Pavlov D, Popova R (1970) Mechanism of passivation processes of the lead sulphate electrode. Electrochim Acta 15:1483–1491CrossRefGoogle Scholar
  42. 42.
    Salih S, Gad-Allah A, Abd El-Wahab A, Abd El-Rahman H (2014) Effect of boric acid on corrosion and electrochemical performance of Pb-0.08% Ca-1.1% Sn alloys containing Cu, As, and Sb impurities for manufacture of grids of lead-acid batteries. Turkish J Chem 38:260–274CrossRefGoogle Scholar
  43. 43.
    Khatbi S, Gouale Y, Mansour S, Lamiri A (2018) Electrochemical and metallurgical behavior of lead-aluminum casting alloys as grids for lead-acid batteries. Port Electrochim Acta 36:133–146Google Scholar
  44. 44.
    Tang Z, Wang JM, Mao XX, Chen QQ, Shen C, Zhang JQ (2007) Application of a novel gelled-electrolyte in valve-regulated lead-acid batteries with tubular positive plates. J Appl Electrochem 37:1163–1169CrossRefGoogle Scholar

Copyright information

© Springer-Verlag GmbH Germany, part of Springer Nature 2018

Authors and Affiliations

  • Koray B. Dönmez
    • 1
  • Metin Gençten
    • 2
  • Yücel Şahin
    • 1
  1. 1.Faculty of Art and Sciences, Department of ChemistryYildiz Technical UniversityIstanbulTurkey
  2. 2.Faculty of Chemical and Metallurgical Engineering, Department of Metallurgy and Materials EngineeringYildiz Technical UniversityIstanbulTurkey

Personalised recommendations