Advertisement

Medical & Biological Engineering & Computing

, Volume 57, Issue 6, pp 1353–1366 | Cite as

Mechanics of tissue rupture during needle insertion in transverse isotropic soft tissue

  • Wanyu Liu
  • Zhiyong Yang
  • Pan Li
  • Jianpeng Zhang
  • Shan JiangEmail author
Original Article
  • 111 Downloads

Abstract

During robot-assisted percutaneous puncture surgery, a bevel-tipped needle is inserted into a fiber-structured soft tissue, which has transverse isotropic mechanical properties. Tissue rupture may lead to needle bending and insertion error. Therefore, analysis of the mechanics of rupture events in transverse isotropic space is essential for the precise control of needle motion. We analyzed the needle stiffness force and the cutting force, both related to rupture events, which are caused by contact deformation and tissue cutting, respectively. A modified model based on a homogeneous elastic half-space contact force model was used to describe the variation in the stiffness force of the needle. An energy-based maximum stiffness force model was proposed to predict the surface rupture for a needle that is inserted at different orientations. A model for the cutting force was presented based on a solid mechanics theory of unidirectional fiber-reinforced composite material to analyze the effect of the needle tip pose on the cutting force. Experiments on porcine muscle confirmed that the stiffness force and the cutting force were clearly influenced by the insertion orientation angle. The developed models could predict the stiffness force and the cutting force during needle insertion into the transverse isotropic tissue. This method provides a foundation for predicting needle deflection in the transverse isotropic space.

Graphical abstract

Force modeling for needle insertion in transverse isotropic soft tissue

Keywords

Fiber-structured soft tissue Cutting force Stiffness force Insertion orientation Needle tip pose 

Notes

Acknowledgments

The authors would like to thank Mr. H Suo for his contribution to the experiment design and data collection. The authors would also like to thank Dr. C Suo and Dr. BB Farouk for their help in proofreading the manuscript.

This work was supported by the National Natural Science Foundation of China (No. 51775368 and No. 51811530310).

References

  1. 1.
    Abayazid M (2015) Robotically steering flexible needles. Ph.D. dissertation, Dept. Faculty of Eng Tech, Twente Univ, Enschede, NetherlandsGoogle Scholar
  2. 2.
    Adebar TK, Greer JD, Laeseke PF, Hwang GL, Okamura AM (2016) Methods for improving the curvature of steerable needles in biological tissue. IEEE Trans Biomed Eng 63:1167–1177CrossRefGoogle Scholar
  3. 3.
    Barnett AC, Lee YS, Moore JZ (2016) Fracture mechanics model of needle cutting tissue. ASME J Manuf Sci Eng 138:011005CrossRefGoogle Scholar
  4. 4.
    Bischoff JE, Arruda EM, Grosh K (2004) A rheological network model for the continuum anisotropic and viscoelastic behaviour of soft tissue. Biomech Model Mechanobiol 3:56–65CrossRefGoogle Scholar
  5. 5.
    Böl M, Kruse R, Ehret AE, Leichsenring K, Siebert T (2012) Compressive properties of passive skeletal muscle—the impact of precise sample geometry on parameter identification in inverse finite element analysis. J Biomech 45:2673–2679CrossRefGoogle Scholar
  6. 6.
    Böl M, Ehret AE, Leichsenring K, Weichert C, Kruse R (2014) On the anisotropy of skeletal muscle tissue under compression. Acta Biomater 10:3225–3234CrossRefGoogle Scholar
  7. 7.
    Carra A, Avilavilchis JC (2010) Needle insertion modeling through several tissue layers. 2010 2nd International Asia Conference on CAR, pp 237–240Google Scholar
  8. 8.
    Cowin SC (2013) Continuum mechanics of anisotropic materials. Springer, New York, pp 83–99CrossRefGoogle Scholar
  9. 9.
    Feng Y, Lee CH, Sun L, Okamoto RJ, Ji S (2015) Automated estimation of elastic material parameters of a transversely isotropic material using asymmetric indentation and inverse finite element analysis. ASME 2015 International Mechanical Engineering Congress and Exposition, pp V003T03A007Google Scholar
  10. 10.
    Hing JT, Brooks AD, Desai JP (2006) Reality-based needle insertion simulation for haptic feedback in prostate brachytherapy. IEEE International Conference on Robotics Automation, pp 619–624Google Scholar
  11. 11.
    Jiang S, Li P, Yu Y, Liu J, Yang ZY (2014) Experimental study of needle-tissue interaction forces: effect of needle geometries, insertion methods and tissue characteristics. J Biomech 47:3344–3353CrossRefGoogle Scholar
  12. 12.
    Khadem M, Fallahi B, Rossa C, Sloboda RS (2015) A mechanics-based model for simulation and control of flexible needle insertion in soft tissue. IEEE International Conference on Robotics Automation, pp 2264–2269Google Scholar
  13. 13.
    Khadem M, Rossa C, Sloboda RS, Usmani N, Tavakoli M (2017) Mechanics of tissue cutting during needle insertion in biological tissue. IEEE Robot Autom Lett 1:800–807CrossRefGoogle Scholar
  14. 14.
    Lendvay TS, Hsieh FJ, Hannaford B, Rosen J (2008) The biomechanics of percutaneous needle insertion. 16th Conference on Medicine Meets Virtual Reality, pp 245–247Google Scholar
  15. 15.
    Li P, Jiang S, Liang D, Yang ZY, Yu Y, Wang W (2017) Modeling of path planning and needle steering with path tracking in anatomical soft tissues for minimally invasive surgery. Med Eng Phys 41:35–45CrossRefGoogle Scholar
  16. 16.
    Mahvash M, Hayward V (2001) Haptic rendering of cutting, a fracture mechanics approach. Haptics-e 2:1–12Google Scholar
  17. 17.
    Mahvash M, Dupont PE (2010) Mechanics of dynamic needle insertion into a biological material. IEEE Trans Biomed Eng 57:934–943Google Scholar
  18. 18.
    Ní Annaidh A, Bruyère K, Destrade M, Gilchrist MD, Otténio M (2012) Characterization of the anisotropic mechanical properties of excised human skin. J Mech Behav Biomed Mater 28:139–148Google Scholar
  19. 19.
    Ní Annaidh A, Bruyère K, Destrade M, Gilchrist MD, Maurini C, Otténio M (2012) Automated estimation of collagen fiber dispersion in the dermis and its contribution to the anisotropic behavior of skin. Ann Biomed Eng 40:1666–1678CrossRefGoogle Scholar
  20. 20.
    Okamura AM, Simone C, O'Leary MD (2004) Force modeling for needle insertion into soft tissue. IEEE Trans Biomed Eng 51:1707–1716CrossRefGoogle Scholar
  21. 21.
    Ottenio M, Tran D, Ní AA, Gilchrist MD, Bruyère K (2015) Strain rate and anisotropy effects on the tensile failure characteristics of human skin. J Mech Behav Biomed Mater 41:241–250CrossRefGoogle Scholar
  22. 22.
    Ridge MD, Wright V (1966) Mechanical properties of skin: a bioengineering study of skin structure. J Appl Physiol 21:1602–1606CrossRefGoogle Scholar
  23. 23.
    Rossa C, Lehmann T, Sloboda R, Usmani N, Tavakoli MC (2017) A data-driven soft sensor for needle deflection in heterogeneous tissue using just-in-time modelling. Med Biol Eng Comput 55:1401–1414CrossRefGoogle Scholar
  24. 24.
    Ruvolo EC Jr, Stamatas GN, Kollias N (2007) Skin viscoelasticity displays site- and age-dependent angular anisotropy. Skin Pharmacol Physiol 20:313–321CrossRefGoogle Scholar
  25. 25.
    Tai Y, Wei L, Zhou H, Nahavandi S, Shi J (2016) Tissue and force modelling on multi-layered needle puncture for percutaneous surgery training. IEEE International Conf on SMC, pp 002923–002927Google Scholar
  26. 26.
    Takaza M, Moerman KM, Gindre J, Lyons G, Simms CK (2013) The anisotropic mechanical behaviour of passive skeletal muscle tissue subjected to large tensile strain. J Mech Behav Biomed Mater 17:209–220CrossRefGoogle Scholar
  27. 27.
    Tanaka N, Higashimori M, Kaneko M, Kao I (2011) Noncontact active sensing for viscoelastic parameters of tissue with coupling effect. IEEE Trans Biomed Eng 58:509–520CrossRefGoogle Scholar
  28. 28.
    Van LM, Lyons CG, Simms CK (2006) A validated model of passive muscle in compression. J Biomech 39:2999–3009CrossRefGoogle Scholar
  29. 29.
    Van LM, Simms CK, Lyons CG (2009) Viscoelastic properties of passive skeletal muscle in compression-cyclic behavior. J Biomech 42:1038–1048CrossRefGoogle Scholar
  30. 30.
    Wong WLE, Joyce TJ, Goh KL (2016) Resolving the viscoelasticity and anisotropy dependence of the mechanical properties of skin from a porcine model. Biomech Model Mechanobiol 15:433–446CrossRefGoogle Scholar

Copyright information

© International Federation for Medical and Biological Engineering 2019

Authors and Affiliations

  1. 1.School of Mechanical EngineeringTianjin UniversityTianjin CityChina

Personalised recommendations