Advertisement

Joint optimizing of interleaving and LDPC decoding for burst errors in PON systems

  • Lei Zhang
  • Chuanchuan YangEmail author
  • Fan ZhangEmail author
Letter
  • 2 Downloads

Notes

Acknowledgements

This work was supported by National Natural Science Foundation of China (Grant Nos. 61475004, 61535002, 61605241).

References

  1. 1.
    Ossieur P, Qiu X Z, Bauwelinck J, et al. Sensitivity penalty calculation for burst-mode receivers using avalanche photodiodes. J Lightw Technol, 2003, 21: 2565–2575CrossRefGoogle Scholar
  2. 2.
    Chung S Y, Forney G D, Richardson T, et al. On the design of low-density parity-check codes within 0.0045 dB of the Shannon limit. IEEE Commun Lett, 2001, 5: 58–60CrossRefGoogle Scholar
  3. 3.
    Brandonisio N, Porto S, Carey D, et al. Forward error correction analysis for 10Gb/s burst-mode transmission in TDM-DWDM PONs. In: Proceedings of Optical Fiber Communications Conference and Exhibition, Los Angeles, 2017Google Scholar
  4. 4.
    Ha J, Kim J, McLaughlin S W. Rate-compatible puncturing of low-density parity-check codes. IEEE Trans Inform Theor, 2004, 50: 2824–2836MathSciNetCrossRefzbMATHGoogle Scholar
  5. 5.
    Chung S Y, Richardson T J, Urbanke R L. Analysis of sum-product decoding of low-density parity-check codes using a Gaussian approximation. IEEE Trans Inform Theor, 2001, 47: 657–670MathSciNetCrossRefzbMATHGoogle Scholar
  6. 6.
    Laubach M, Yang S H, Han Y, et al. FEC proposal for NGEPON-updata. In: IEEE 802/802.3 Plenary, Orlando Florida, 2017Google Scholar

Copyright information

© Science China Press and Springer-Verlag GmbH Germany, part of Springer Nature 2019

Authors and Affiliations

  1. 1.State Key Laboratory of Advanced Optical Communication Systems and NetworksPeking UniversityBeijingChina

Personalised recommendations