Advertisement

Science China Technological Sciences

, Volume 62, Issue 9, pp 1649–1654 | Cite as

Writing with a nano-grooved pin

  • HuaLai Dong
  • Xing YangEmail author
  • CunJing Lv
  • Jin Wang
  • QuanShui ZhengEmail author
Letter
  • 10 Downloads

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

Notes

Supplementary material

11431_2019_9540_MOESM1_ESM.doc (21.9 mb)
Writing with a nano-grooved pin

Supplementary material, approximately 1.65 MB.

References

  1. 1.
    Engstrom D S, Porter B, Pacios M, et al. Additive nanomanufacturing —A review. J Mater Res, 2014, 29: 1792–1816CrossRefGoogle Scholar
  2. 2.
    Kuang M, Wang L, Song Y. Controllable printing droplets for high-resolution patterns. Adv Mater, 2014, 26: 6950–6958CrossRefGoogle Scholar
  3. 3.
    Li C, Faulkner-Jones A, Dun A R, et al. Rapid formation of a supramolecular polypeptide-DNA hydrogel for in situ three-dimensional multilayer bioprinting. Angew Chem Int Ed, 2015, 54: 3957–3961CrossRefGoogle Scholar
  4. 4.
    Ambrosi A, Pumera M. 3d-printing technologies for electrochemical applications. Chem Soc Rev, 2016, 45: 2740–2755CrossRefGoogle Scholar
  5. 5.
    Arrabito G, Pignataro B. Solution processed micro- and nano-bioar-rays for multiplexed biosensing. Anal Chem, 2012, 84: 5450–5462CrossRefGoogle Scholar
  6. 6.
    Tavana H, Jovic A, Mosadegh B, et al. Nanolitre liquid patterning in aqueous environments for spatially defined reagent delivery to mammalian cells. Nat Mater, 2009, 8: 736–741CrossRefGoogle Scholar
  7. 7.
    Huang J Y, Lo Y C, Niu J J, et al. Nanowire liquid pumps. Nat Nanotech, 2013, 8: 277–281CrossRefGoogle Scholar
  8. 8.
    Fernandes T G, Diogo M M, Clark D S, et al. High-throughput cellular microarray platforms: Applications in drug discovery, toxicology and stem cell research. Trends Biotech, 2009, 27: 342–349CrossRefGoogle Scholar
  9. 9.
    Neužil P, Giselbrecht S, Länge K, et al. Revisiting lab-on-a-chip technology for drug discovery. Nat Rev Drug Discov, 2012, 11: 620–632CrossRefGoogle Scholar
  10. 10.
    Fischer S R. History of Writing. London: Reaktion Books, 2004Google Scholar
  11. 11.
    Adamson S J, Wang D. A change in dispensing technology-jetting takes off. Semicond Tech, 2004, 29: 67–70Google Scholar
  12. 12.
    Singh M, Haverinen H M, Dhagat P, et al. Inkjet printing-process and its applications. Adv Mater, 2010, 22: 673–685CrossRefGoogle Scholar
  13. 13.
    Park J U, Hardy M, Kang S J, et al. High-resolution electro-hydrodynamic jet printing. Nat Mater, 2007, 6: 782–789CrossRefGoogle Scholar
  14. 14.
    Taylor G. Electrically driven jets. Proc R Soc A-Math Phys Eng Sci, 1969, 313: 453–475CrossRefGoogle Scholar
  15. 15.
    Galliker P, Schneider J, Eghlidi H, et al. Direct printing of nanostructures by electrostatic autofocussing of ink nanodroplets. Nat Commun, 2012, 3: 890CrossRefGoogle Scholar
  16. 16.
    Kaisei K, Satoh N, Kobayashi K, et al. Nanoscale liquid droplet deposition using the ultrasmall aperture on a dynamic mode afm tip. Nanotechnology, 2011, 22: 175301CrossRefGoogle Scholar
  17. 17.
    Ferraro P, Coppola S, Grilli S, et al. Dispensing nano-pico droplets and liquid patterning by pyroelectrodynamic shooting. Nat Nanotech, 2010, 5: 429–435CrossRefGoogle Scholar
  18. 18.
    Lv C, Chen C, Chuang Y C, et al. Substrate curvature gradient drives rapid droplet motion. Phys Rev Lett, 2014, 113: 026101CrossRefGoogle Scholar
  19. 19.
    Li E Q, Thoroddsen S T. The fastest drop climbing on a wet conical fibre. Phys Fluids, 2013, 25: 052105CrossRefGoogle Scholar
  20. 20.
    Seemann R, Brinkmann M, Kramer E J, et al. Wetting morphologies at microstructured surfaces. Proc Natl Acad Sci USA, 2005, 102: 1848–1852CrossRefGoogle Scholar
  21. 21.
    Ishino C, Okumura K, Quéré D. Wetting transitions on rough surfaces. Europhys Lett, 2004, 68: 419–425CrossRefGoogle Scholar
  22. 22.
    Quéré D. Wetting and roughness. Ann Rev Mater Res, 2008, 38: 71–99CrossRefGoogle Scholar
  23. 23.
    Khan Y, Al-Falih H, Zhang Y, et al. Two-step controllable electrochemical etching of tungsten scanning probe microscopy tips. Rev Sci Instrum, 2012, 83: 063708CrossRefGoogle Scholar
  24. 24.
    Taylor B. Concerning the ascent of water between two glass planes. Philos Trans R Soc London, 1710, 27: 538–538CrossRefGoogle Scholar
  25. 25.
    Concus P, Finn R. On the behavior of a capillary surface in a wedge. Proc Natl Acad Sci USA, 1969, 63: 292–299CrossRefzbMATHGoogle Scholar
  26. 26.
    Zhao Y P. Physical Mechanics of Surfaces and Interfaces (in Chinese). Beijing: Science Press, 2012Google Scholar
  27. 27.
    Yuan Q, Zhao Y P. Topology-dominated dynamic wetting of the precursor chain in a hydrophilic interior corner. Proc R Soc A-Math Phys Eng Sci, 2011, 468: 310–322CrossRefGoogle Scholar
  28. 28.
    Meister A, Liley M, Brugger J, et al. Nanodispenser for attoliter volume deposition using atomic force microscopy probes modified by focused-ion-beam milling. Appl Phys Lett, 2004, 85: 6260–6262CrossRefGoogle Scholar
  29. 29.
    Kim K H, Moldovan N, Espinosa H D. A nanofountain probe with sub-100 nm molecular writing resolution. Small, 2005, 1: 632–635CrossRefGoogle Scholar
  30. 30.
    Piner R D, Zhu J, Xu F, et al. “Dip-Pen” nanolithography. Science, 1999, 283: 661–663CrossRefGoogle Scholar
  31. 31.
    Salaita K, Wang Y, Mirkin C A. Applications of dip-pen nanolithography. Nat Nanotech, 2007, 2: 145–155CrossRefGoogle Scholar
  32. 32.
    Eigler D M, Schweizer E K. Positioning single atoms with a scanning tunnelling microscope. Nature, 1990, 344: 524–526CrossRefGoogle Scholar
  33. 33.
    Huo F, Zheng Z, Zheng G, et al. Polymer pen lithography. Science, 2008, 321: 1658–1660CrossRefGoogle Scholar
  34. 34.
    Shim W, Braunschweig A B, Liao X, et al. Hard-tip, soft-spring lithography. Nature, 2011, 469: 516–520CrossRefGoogle Scholar

Copyright information

© Science China Press and Springer-Verlag GmbH Germany, part of Springer Nature 2019

Authors and Affiliations

  1. 1.State Key Laboratory of Precision Measurement Technology and Instruments, Department of Precision InstrumentTsinghua UniversityBeijingChina
  2. 2.Center for Nano and Micro MechanicsTsinghua UniversityBeijingChina
  3. 3.Department of Engineering MechanicsTsinghua UniversityBeijingChina

Personalised recommendations