Advertisement

Chemo-mechanical coupling effect on high temperature oxidation: A review

  • XuFei Fang
  • Yan Li
  • MengKun Yue
  • Xue FengEmail author
Review Special Topic: Chemomechanics

Abstract

The rapid development in the field of chemo-mechanical coupling has drawn increasing attention in recent years. Chemo-mechanical coupling phenomena exist in many research areas, ranging from development of advanced batteries, biomechanical engineering, hydrogen embrittlement, and high temperature oxidation, etc. In this review, we attempt to provide an overview of the recent advances in chemo-mechanical coupling study on high temperature oxidation. The theoretical frameworks, computational modeling, and experimental studies on this subject are summarized and discussed. The stress-diffusion coupling effect in diffusion-controlled oxidation process, stress-induced evolution of oxide morphology in microscale experiment, and stress-oxidation interaction at crack front for intergranular fracture are highlighted. In addition, potential applications and possible methods via surface engineering for improving oxidation-resistance of high temperature structural materials are briefly discussed.

Keywords

chemo-mechanical coupling high temperature oxidation microscale experiment fracture 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    Kitaguchi H S, Li H Y, Evans H E, et al. Oxidation ahead of a crack tip in an advanced Ni-based superalloy. Acta Mater, 2013, 61: 1968–1981CrossRefGoogle Scholar
  2. 2.
    Dai J, Zhu J, Chen C, et al. High temperature oxidation behavior and research status of modifications on improving high temperature oxidation resistance of titanium alloys and titanium aluminides: A review. J Alloys Compd, 2016, 685: 784–798CrossRefGoogle Scholar
  3. 3.
    Saillard A, Cherkaoui M, Capolungo L, et al. Stress influence on high temperature oxide scale growth: Modeling and investigation on a thermal barrier coating system. Philos Mag, 2010, 90: 2651–2676CrossRefGoogle Scholar
  4. 4.
    Golmon S, Maute K, Dunn M L. Numerical modeling of electrochemical-mechanical interactions in lithium polymer batteries. Comput Struct, 2009, 87: 1567–1579CrossRefGoogle Scholar
  5. 5.
    Ma Y, Yao X, Su Y. Shape optimization and material gradient design of the sharp hot structure. Acta Astronaut, 2014, 103: 106–112CrossRefGoogle Scholar
  6. 6.
    Su Y Q, Yao X F, Wang S, et al. Improvement on measurement accuracy of high-temperature DIC by grayscale-average technique. Optics Lasers Eng, 2015, 75: 10–16CrossRefGoogle Scholar
  7. 7.
    Wang S, Yao X F, Su Y Q, et al. High temperature image correction in DIC measurement due to thermal radiation. Meas Sci Technol, 2015, 26: 095006CrossRefGoogle Scholar
  8. 8.
    Fang X, Qu Z, Zhang C, et al. In-situ testing of surface evolution of SiC during thermal ablation: Mechanisms of formation, flowing and growth of liquid silica beads. Ceramics Int, 2017, 43: 7040–7047CrossRefGoogle Scholar
  9. 9.
    Qu Z, Fang X, Su H, et al. Measurements for displacement and deformation at high temperature by using edge detection of digital image. Appl Opt, 2015, 54: 8731–8737CrossRefGoogle Scholar
  10. 10.
    Clarke D R, Oechsner M, Padture N P. Thermal-barrier coatings for more efficient gas-turbine engines. MRS Bull, 2012, 37: 891–898CrossRefGoogle Scholar
  11. 11.
    Evans A G, Clarke D R, Levi C G. The influence of oxides on the performance of advanced gas turbines. J Eur Ceramic Soc, 2008, 28: 1405–1419CrossRefGoogle Scholar
  12. 12.
    Evans H E. Perturbation of parabolic kinetics resulting from the accumulation of stress in protective oxide layers. J Electrochem Soc, 1978, 125: 1180–1185CrossRefGoogle Scholar
  13. 13.
    Wang H, Shen S. A chemomechanical coupling model for oxidation and stress evolution in ZrB2-SiC. J Mater Res, 2017, 32: 1267–1278CrossRefGoogle Scholar
  14. 14.
    Dong X, Fang X, Feng X, et al. Diffusion and stress coupling effect during oxidation at high temperature. J Am Ceram Soc, 2013, 96: 44–46CrossRefGoogle Scholar
  15. 15.
    Dong X, Fang X, Feng X, et al. Oxidation at high temperature under three-point bending considering stress-diffusion coupling effects. Oxid Met, 2016, 86: 125–133CrossRefGoogle Scholar
  16. 16.
    Zhou H, Qu J, Cherkaoui M. Stress-oxidation interaction in selective oxidation of Cr-Fe alloys. Mech Mater, 2010, 42: 63–71CrossRefGoogle Scholar
  17. 17.
    Wang C, Ai S, Fang D. Effect of oxidation-induced material parameter variation on the high temperature oxidation behavior of nickel. Acta Mech Solid Sin, 2016, 29: 337–344CrossRefGoogle Scholar
  18. 18.
    Wang H, Shen S. A chemomechanical model for stress evolution and distribution in the viscoplastic oxide scale during oxidation. J Appl Mech, 2016, 83: 051008CrossRefGoogle Scholar
  19. 19.
    Bruemmer S M, Olszta M J, Toloczko M B, et al. Grain boundary selective oxidation and intergranular stress corrosion crack growth of high-purity nickel binary alloys in high-temperature hydrogenated water. Corrosion Sci, 2018, 131: 310–323CrossRefGoogle Scholar
  20. 20.
    Jin X, Li P, Hou C, et al. Oxidation behaviors of ZrB2 based ultrahigh temperature ceramics under compressive stress. Ceramics Int, 2019, 45: 7278–7285CrossRefGoogle Scholar
  21. 21.
    Kurpaska L, Favergeon J, Lahoche L, et al. On the determination of growth stress during oxidation of pure zirconium at elevated temperature. Appl Surf Sci, 2018, 446: 27–35CrossRefGoogle Scholar
  22. 22.
    Shen Q, Li S Z, Yang L, et al. Coupled mechanical-oxidation modeling during oxidation of thermal barrier coatings. Comput Mater Sci, 2018, 154: 538–546CrossRefGoogle Scholar
  23. 23.
    Ramsay J D, Evans H E, Child D J, et al. The influence of stress on the oxidation of a Ni-based superalloy. Corrosion Sci, 2019, 154: 277–285CrossRefGoogle Scholar
  24. 24.
    Le Saux M, Guilbert T, Brachet J C. An approach to study oxidation-induced stresses in Zr alloys oxidized at high temperature. Corrosion Sci, 2019, 140: 79–91CrossRefGoogle Scholar
  25. 25.
    Zhao Y, Chen Y, Ai S, et al. A diffusion, oxidation reaction and large viscoelastic deformation coupled model with applications to SiC fiber oxidation. Int J Plast, 2019, 118: 173–189CrossRefGoogle Scholar
  26. 26.
    Fang X, Liu F, Su H, et al. Ablation of C/SiC, C/SiC-ZrO2 and C/SiC-ZrB2 composites in dry air and air mixed with water vapor. Ceramics Int, 2014, 40: 2985–2991CrossRefGoogle Scholar
  27. 27.
    Fang X, Zhang G, Feng X. Performance of TBCs system due to the different thicknesses of top ceramic layer. Ceramics Int, 2015, 41: 2840–2846CrossRefGoogle Scholar
  28. 28.
    Fang X, Liu F, Lu B, et al. Bio-inspired microstructure design to improve thermal ablation and oxidation resistance: Experiment on SiC. J Am Ceram Soc, 2015, 98: 4010–4015CrossRefGoogle Scholar
  29. 29.
    Fang X, Liu F, Xia B, et al. Formation mechanisms of characteristic structures on the surface of C/SiC composites subjected to thermal ablation. J Eur Ceramic Soc, 2016, 36: 451–456CrossRefGoogle Scholar
  30. 30.
    Zhou Z, Peng X, Wei Z, et al. A thermo-chemo-mechanical model for the oxidation of zirconium diboride. J Am Ceram Soc, 2015, 98: 629–636CrossRefGoogle Scholar
  31. 31.
    Peng J, Fang X, Qu Z, et al. Isothermal oxidation behavior of NiAl and NiAl-(Cr,Mo) eutectic alloys. Corrosion Sci, 2019, 151: 27–34CrossRefGoogle Scholar
  32. 32.
    Evans A G, Hutchinson J W. The mechanics of coating delamination in thermal gradients. Surf Coatings Tech, 2007, 201: 7905–7916CrossRefGoogle Scholar
  33. 33.
    Zhou H. Stress-Diffusion Interaction During Oxide Scale Growth on Metallic Alloys. Dissertation for Dcotoral Degree. Atlanta: Georgia Institute of Technology School of Mechanical Engineering, 2010Google Scholar
  34. 34.
    Rhines F N, Wolf J S. The role of oxide microstructure and growth stresses in the high-temperature scaling of nickel. Metall Trans, 1970, 1: 1701–1710CrossRefGoogle Scholar
  35. 35.
    Clarke D R. The lateral growth strain accompanying the formation of a thermally grown oxide. Acta Mater, 2003, 51: 1393–1407CrossRefGoogle Scholar
  36. 36.
    Tolpygo V K, Clarke D R. Competition between stress generation and relaxation during oxidation of an Fe-Cr-Al-Y alloy. Oxidation Met, 1998, 49: 187–212CrossRefGoogle Scholar
  37. 37.
    Freund L B, Nix W D. A critical thickness condition for a strained compliant substrate/epitaxial film system. Appl Phys Lett, 1996, 69: 173–175CrossRefGoogle Scholar
  38. 38.
    Zhang T Y, Lee S, Guido L J, et al. Criteria for formation of interface dislocations in a finite thickness epilayer deposited on a substrate. J Appl Phys, 1999, 85: 7579–7586CrossRefGoogle Scholar
  39. 39.
    Dong X, Feng X, Hwang K C. Stress-diffusion interaction during oxidation at high temperature. Chem Phys Lett, 2014, 614: 95–98CrossRefGoogle Scholar
  40. 40.
    Panicaud B, Grosseau-Poussard J L, Dinhut J F. General approach on the growth strain versus viscoplastic relaxation during oxidation of metals. Comput Mater Sci, 2008, 42: 286–294CrossRefGoogle Scholar
  41. 41.
    Maharjan S, Zhang X, Wang Z. Effect of oxide growth strain in residual stresses for the deflection test of single surface oxidation of alloys. Oxid Met, 2012, 77: 93–106CrossRefGoogle Scholar
  42. 42.
    Birks N, Meier G H, Pettit F S. Introduction to the High Temperature Oxidaton of Metals. Cambridge: Cambridge University Press, 2006CrossRefGoogle Scholar
  43. 43.
    Young D J. High Temperature Oxidation and Crossion of Metals. Elservier, 2008Google Scholar
  44. 44.
    Sabioni A C S, Huntz A M, Philibert J, et al. Relation between the oxidation growth rate of chromia scales and self-diffusion in Cr2O3. J Mater Sci, 1992, 27: 4782–4790CrossRefGoogle Scholar
  45. 45.
    Yearian H J, Randell E C, Longo T A. The structure of oxide scales on chromium steels. Corrosion, 1956, 12: 55–65CrossRefGoogle Scholar
  46. 46.
    Dong X, Feng X, Hwang K C. Oxidation stress evolution and relaxation of oxide film/metal substrate system. J Appl Phys, 2012, 112: 023502CrossRefGoogle Scholar
  47. 47.
    Suo Y, Yang X, Shen S. Residual stress analysis due to chemo-mechanical coupled effect, intrinsic strain and creep deformation during oxidation. Oxid Met, 2015, 84: 413–427CrossRefGoogle Scholar
  48. 48.
    Evans H E. Stress effects in high temperature oxidation of metals. Int Mater Rev, 1995, 40: 1–40CrossRefGoogle Scholar
  49. 49.
    Tsai S C, Huntz A M, Dolin C. Growth mechanism of Cr2O3 scales: Oxygen and chromium diffusion, oxidation kinetics and effect of yttrium. Mater Sci Eng-A, 1996, 212: 6–13CrossRefGoogle Scholar
  50. 50.
    Kofstad P. Diffusion and Electrical Conductivity in Binary Metal Oxide. New York: Wiley, 1972Google Scholar
  51. 51.
    Loeffel K, Anand L, Gasem Z M. On modeling the oxidation of high-temperature alloys. Acta Mater, 2013, 61: 399–424CrossRefGoogle Scholar
  52. 52.
    Deal B E, Grove A S. General relationship for the thermal oxidation of silicon. J Appl Phys, 1965, 36: 3770–3778CrossRefGoogle Scholar
  53. 53.
    Chou K C. A kinetic model for oxidation of Si-Al-O-N materials. J Am Ceramic Soc, 2006, 89: 1568–1576CrossRefGoogle Scholar
  54. 54.
    Mott N F. A theory of the formation of protective oxide films on metals. Trans Faraday Soc, 1939, 35: 1175–1177CrossRefGoogle Scholar
  55. 55.
    Mott N F. The theory of the formation of protective oxide films on metals, II. Trans Faraday Soc, 1940, 35: 472–483CrossRefGoogle Scholar
  56. 56.
    Mott N F. The theory of the formation of protective oxide films on metals—III. Trans Faraday Soc, 1947, 43: 429–434CrossRefGoogle Scholar
  57. 57.
    Mott N F. Oxidation of metals and the formation of protective films. Nature, 1940, 145: 996–1000CrossRefGoogle Scholar
  58. 58.
    Cabrera N, Mott N F. Theory of the oxidation of metals. Rep Prog Phys, 1940, 12: 163–184CrossRefGoogle Scholar
  59. 59.
    Roy C, Burgess B. A study of the stresses generated in zirconia films during the oxidation of zirconium alloys. Oxid Met, 1970, 2: 235–261CrossRefGoogle Scholar
  60. 60.
    Gauthier W, Pailler F, Lamon J, et al. Oxidation of silicon carbide fibers during static fatigue in air at intermediate temperatures. J Am Ceramic Soc, 2009, 92: 2067–2073CrossRefGoogle Scholar
  61. 61.
    Larché F, Cahn J W. A linear theory of thermochemical equilibrium of solids under stress. Acta Metall, 1973, 21: 1051–1063CrossRefGoogle Scholar
  62. 62.
    Larché F C, Cahn J. The effect of self-stress on diffusion in solids. Acta Metall, 1982, 30: 1835–1845CrossRefGoogle Scholar
  63. 63.
    Larché F C, Cahn J W. Overview No. 41 The interactions of composition and stress in crystalline solids. Acta Metall, 1985, 33: 331–357Google Scholar
  64. 64.
    Wang W L, Lee S, Chen J R. Effect of chemical stress on diffusion in a hollow cylinder. J Appl Phys, 2002, 91: 9584–9590CrossRefGoogle Scholar
  65. 65.
    Krishnamurthy R, Srolovitz D J. Stress distributions in growing oxide films. Acta Mater, 2003, 51: 2171–2190CrossRefGoogle Scholar
  66. 66.
    Brassart L, Suo Z. Reactive flow in solids. J Mech Phys Solids, 2013, 61: 61–77MathSciNetCrossRefGoogle Scholar
  67. 67.
    Cui Z, Gao F, Qu J. Interface-reaction controlled diffusion in binary solids with applications to lithiation of silicon in lithium-ion batteries. J Mech Phys Solids, 2013, 61: 293–310MathSciNetCrossRefGoogle Scholar
  68. 68.
    Haftbaradaran H, Song J, Curtin W A, et al. Continuum and atomistic models of strongly coupled diffusion, stress, and solute concentration. J Power Sources, 2011, 196: 361–370CrossRefGoogle Scholar
  69. 69.
    Haftbaradaran H, Gao H, Curtin W A. A surface locking instability for atomic intercalation into a solid electrode. Appl Phys Lett, 2010, 96: 091909CrossRefGoogle Scholar
  70. 70.
    Kao D B, McVittie J P, Nix W D, et al. Two-dimensional thermal oxidation of silicon. II. Modeling stress effects in wet oxides. IEEE Trans Electron Devices, 2002, 35: 25–37Google Scholar
  71. 71.
    Coffin H, Bonafos C, Schamm S, et al. Oxidation of Si nanocrystals fabricated by ultralow-energy ion implantation in thin SiO2 layers. J Appl Phys, 2006, 99: 044302CrossRefGoogle Scholar
  72. 72.
    Yue M, Dong X, Fang X, et al. Effect of interface reaction and diffusion on stress-oxidation coupling at high temperature. J Appl Phys, 2018, 123: 155301CrossRefGoogle Scholar
  73. 73.
    Suo Z, Kubair D V, Evans A G, et al. Stresses induced in alloys by selective oxidation. Acta Mater, 2003, 51: 959–974CrossRefGoogle Scholar
  74. 74.
    El Kadiri H, Horstemeyer M F, Bammann D J. A theory for stress-driven interfacial damage upon cationic-selective oxidation of alloys. J Mech Phys Solids, 2008, 56: 3392–3415zbMATHCrossRefGoogle Scholar
  75. 75.
    Loeffel K, Anand L. A chemo-thermo-mechanically coupled theory for elastic-viscoplastic deformation, diffusion, and volumetric swelling due to a chemical reaction. Int J Plast, 2011, 27: 1409–1431zbMATHCrossRefGoogle Scholar
  76. 76.
    Yu P, Shen S. A fully coupled theory and variational principle for thermal-electrical-chemical-mechanical processes. J Appl Mech, 2014, 81: 111005CrossRefGoogle Scholar
  77. 77.
    Wang H, Suo Y, Shen S. Reaction-diffusion-stress coupling effect in inelastic oxide scale during oxidation. Oxid Met, 2015, 83: 507–519CrossRefGoogle Scholar
  78. 78.
    Suo Y, Shen S. General approach on chemistry and stress coupling effects during oxidation. J Appl Phys, 2013, 114: 164905CrossRefGoogle Scholar
  79. 79.
    Suo Y, Shen S. Dynamical theoretical model and variational principles for coupled temperature-diffusion-mechanics. Acta Mech, 2012, 223: 29–41MathSciNetzbMATHCrossRefGoogle Scholar
  80. 80.
    Hu S, Shen S. Non-equilibrium thermodynamics and variational principles for fully coupled thermal-mechanical-chemical processes. Acta Mech, 2013, 224: 2895–2910MathSciNetzbMATHCrossRefGoogle Scholar
  81. 81.
    Zhang X, Zhong Z. A coupled theory for chemically active and deformable solids with mass diffusion and heat conduction. J Mech Phys Solids, 2017, 107: 49–75MathSciNetCrossRefGoogle Scholar
  82. 82.
    Yang F. Interaction between diffusion and chemical stresses. Mater Sci Eng-A, 2005, 409: 153–159CrossRefGoogle Scholar
  83. 83.
    Yang F. Effect of local solid reaction on diffusion-induced stress. J Appl Phys, 2010, 107: 103516CrossRefGoogle Scholar
  84. 84.
    Yang Q S, Qin Q H, Ma L H, et al. A theoretical model and finite element formulation for coupled thermo-electro-chemo-mechanical media. Mech Mater, 2010, 42: 148–156CrossRefGoogle Scholar
  85. 85.
    Fang X, Jia J, Feng X. Three-point bending test at extremely high temperature enhanced by real-time observation and measurement. Measurement, 2015, 59: 171–176CrossRefGoogle Scholar
  86. 86.
    Li Y, Fang X, Zhang S, et al. Microstructure evolution of FeNiCr alloy induced by stress-oxidation coupling using high temperature nanoindentation. Corrosion Sci, 2018, 135: 192–196CrossRefGoogle Scholar
  87. 87.
    Wang D, Yin Y, Wu J, et al. Interaction potential between parabolic rotator and an outside particle. J Nanomaterials, 2014, 2014: 1–8Google Scholar
  88. 88.
    Lv C, Chen C, Chuang Y C, et al. Substrate curvature gradient drives rapid droplet motion. Phys Rev Lett, 2014, 113: 026101CrossRefGoogle Scholar
  89. 89.
    Nichols F A, Mullins W W. Morphological changes of a surface of revolution due to capillarity-induced surface diffusion. J Appl Phys, 1965, 36: 1826–1835CrossRefGoogle Scholar
  90. 90.
    Yin Y, Chen C, Lü C, et al. Shape gradient and classical gradient of curvatures: Driving forces on micro/nano curved surfaces. Appl Math Mech-Engl Ed, 2011, 32: 533–550MathSciNetzbMATHCrossRefGoogle Scholar
  91. 91.
    Fang X, Li Y, Wang D, et al. Surface evolution at nanoscale during oxidation: A competing mechanism between local curvature effect and stress effect. J Appl Phys, 2016, 119: 155302CrossRefGoogle Scholar
  92. 92.
    Fang X, Li Y, Feng X. Curvature effect on the surface topography evolution during oxidation at small scale. J Appl Phys, 2017, 121: 125301CrossRefGoogle Scholar
  93. 93.
    Li Y, Fang X, Qu Z, et al. In situ full-field measurement of surface oxidation on Ni-based alloy using high temperature scanning probe microscopy. Sci Rep, 2018, 8: 6684CrossRefGoogle Scholar
  94. 94.
    Li Y, Fang X, Xia B, et al. In situ measurement of oxidation evolution at elevated temperature by nanoindentation. Scripta Mater, 2015, 103: 61–64CrossRefGoogle Scholar
  95. 95.
    Fang X, Li Y, Zhang C, et al. Transition of oxide film configuration and the critical stress inferred by scanning probe microscopy at nanoscale. Chem Phys Lett, 2016, 660: 33–36CrossRefGoogle Scholar
  96. 96.
    Cruchley S, Evans H, Taylor M. An overview of the oxidation of Ni-based superalloys for turbine disc applications: Surface condition, applied load and mechanical performance. Mater at High Temp, 2016, 33: 465–475CrossRefGoogle Scholar
  97. 97.
    Németh A A N, Crudden D J, Armstrong D E J, et al. Environmentally-assisted grain boundary attack as a mechanism of embrittlement in a nickel-based superalloy. Acta Mater, 2017, 126: 361–371CrossRefGoogle Scholar
  98. 98.
    Tolpygo V K, Dryden J R, Clarke D R. Determination of the growth stress and strain in α-Al2O3 scales during the oxidation of Fe-22Cr-4.8Al-0.3Y alloy. Acta Mater, 1998, 46: 927–937CrossRefGoogle Scholar
  99. 99.
    Clarke D R. Stress generation during high-temperature oxidation of metallic alloys. Curr Opin Solid State Mater Sci, 2002, 6: 237–244CrossRefGoogle Scholar
  100. 100.
    Wouters Y, Pint B, Monceau D. Special issue on corrosion-mechanical loading interactions. Oxid Met, 2017, 88: 1–2CrossRefGoogle Scholar
  101. 101.
    Dehm G, Jaya B N, Raghavan R, et al. Overview on micro- and nanomechanical testing: New insights in interface plasticity and fracture at small length scales. Acta Mater, 2017, 142: 248–282CrossRefGoogle Scholar
  102. 102.
    Kumar S, Curtin W A. Crack interaction with microstructure. Mater Today, 2007, 10: 34–44CrossRefGoogle Scholar
  103. 103.
    Jaya B N, Wheeler J M, Wehrs J, et al. Microscale fracture behavior of single crystal silicon beams at elevated temperatures. Nano Lett, 2016, 16: 7597–7603CrossRefGoogle Scholar
  104. 104.
    Luo L, Zou L, Schreiber D K, et al. In-situ transmission electron microscopy study of surface oxidation for Ni-10Cr and Ni-20Cr alloys. Scripta Mater, 2016, 114: 129–132CrossRefGoogle Scholar
  105. 105.
    Zhou G, Luo L, Li L, et al. Step-edge-induced oxide growth during the oxidation of Cu surfaces. Phys Rev Lett, 2012, 109: 235502CrossRefGoogle Scholar
  106. 106.
    Wheeler J M, Michler J. Elevated temperature, nano-mechanical testing in situ in the scanning electron microscope. Rev Sci Instruments, 2013, 84: 045103CrossRefGoogle Scholar
  107. 107.
    Raghavan R, Harzer T P, Chawla V, et al. Comparing small scale plasticity of copper-chromium nanolayered and alloyed thin films at elevated temperatures. Acta Mater, 2015, 93: 175–186CrossRefGoogle Scholar
  108. 108.
    Fritz R, Kiener D. Development and application of a heated in-situ SEM micro-testing device. Measurement, 2017, 110: 356–366CrossRefGoogle Scholar
  109. 109.
    Zou Y, Wheeler J M, Ma H, et al. Nanocrystalline high-entropy alloys: A new paradigm in high-temperature strength and stability. Nano Lett, 2017, 17: 1569–1574CrossRefGoogle Scholar
  110. 110.
    Wheeler J M, Armstrong D E J, Heinz W, et al. High temperature nanoindentation: The state of the art and future challenges. Curr Opin Solid State Mater Sci, 2015, 19: 354–366CrossRefGoogle Scholar
  111. 111.
    Trenkle J C, Packard C E, Schuh C A. Hot nanoindentation in inert environments. Rev Sci Instruments, 2010, 81: 073901CrossRefGoogle Scholar
  112. 112.
    Schuh C A, Packard C E, Lund A C. Nanoindentation and contact-mode imaging at high temperatures. J Mater Res, 2006, 21: 725–736CrossRefGoogle Scholar
  113. 113.
    Mehrer H. Diffusion in Solids. Berlin: Springer-Verlag, 2007CrossRefGoogle Scholar
  114. 114.
    Chan K S. Time-dependent crack growth thresholds of Ni-base superalloys. Metall Mat Trans A, 2014, 45: 3454–3466CrossRefGoogle Scholar
  115. 115.
    Jiang R, Proprentner D, Callisti M, et al. Role of oxygen in enhanced fatigue cracking in a PM Ni-based superalloy: Stress assisted grain boundary oxidation or dynamic embrittlment? Corrosion Sci, 2018, 139: 141–154CrossRefGoogle Scholar
  116. 116.
    Viskari L, Hörnqvist M, Moore K L, et al. Intergranular crack tip oxidation in a Ni-base superalloy. Acta Mater, 2013, 61: 3630–3639CrossRefGoogle Scholar
  117. 117.
    Zhou H, Qu S. The effect of nanoscale twin boundaries on fracture toughness in nanocrystalline Ni. Nanotechnology, 2010, 21: 035706CrossRefGoogle Scholar
  118. 118.
    Zhou H, Qu S, Yang W. Toughening by nano-scaled twin boundaries in nanocrystals. Model Simul Mater Sci Eng, 2010, 18: 065002CrossRefGoogle Scholar
  119. 119.
    Viskari L, Johansson S, Stiller K. Oxygen influenced intergranular crack propagation: analysing microstructure and chemistry in the crack tip region. Mater at High Temp, 2011, 28: 336–341CrossRefGoogle Scholar
  120. 120.
    Kitaguchi H S, Moody M P, Li H Y, et al. An atom probe tomography study of the oxide-metal interface of an oxide intrusion ahead of a crack in a polycrystalline Ni-based superalloy. Scripta Mater, 2015, 97: 41–44CrossRefGoogle Scholar
  121. 121.
    Dugdale H, Armstrong D E J, Tarleton E, et al. How oxidized grain boundaries fail. Acta Mater, 2013, 61: 4707–4713CrossRefGoogle Scholar
  122. 122.
    Zhang J. High Temperature Deformation and Fracture of Materials. Cambridge: Woodhead Publishing Limited, 2010CrossRefGoogle Scholar
  123. 123.
    Ryan M. Peering below the surface. Nat Mater, 2004, 3: 663–664CrossRefGoogle Scholar
  124. 124.
    Vehoff H, Ochmann P, Göken M, et al. Deformation processes at crack tips in NiAl single- and bicrystals. Mater Sci Eng-A, 1997, 239–240: 378–385CrossRefGoogle Scholar
  125. 125.
    Zeng Z, Li X, Lu L, et al. Fracture in a thin film of nanotwinned copper. Acta Mater, 2015, 98: 313–317CrossRefGoogle Scholar
  126. 126.
    Shan Z W, Lu L, Minor A M, et al. The effect of twin plane spacing on the deformation of copper containing a high density of growth twins. J Miner Metal Mater Soc, 2008, 60: 71–74CrossRefGoogle Scholar
  127. 127.
    Krupp U, Kane W, Pfaendtner J A, et al. Oxygen-induced intergranular fracture of the nickel-base alloy IN718 during mechanical loading at high temperatures. Mat Res, 2004, 7: 35–41CrossRefGoogle Scholar
  128. 128.
    Krupp U. Dynamic embrittlement—time-dependent quasi-brittle intergranular fracture at high temperatures. Int Mater Rev, 2005, 50: 83–97CrossRefGoogle Scholar
  129. 129.
    Krupp U, McMahon Jr C J. Dynamic embrittlement-time-dependent brittle fracture. J Alloys Compd, 2004, 378: 79–84CrossRefGoogle Scholar
  130. 130.
    Evans H E, Li H Y, Bowen P. A mechanism for stress-aided grain boundary oxidation ahead of cracks. Scripta Mater, 2013, 69: 179–182CrossRefGoogle Scholar
  131. 131.
    Chan K S. A grain boundary fracture model for predicting dynamic embrittlement and oxidation-induced cracking in superalloys. Metall Mat Trans A, 2015, 46: 2491–2505CrossRefGoogle Scholar
  132. 132.
    Ma L, Chang K M. Identification of SAGBO-induced damage zone ahead of crack tip to characterize sustained loading crack growth in alloy 783. Scripta Mater, 2003, 48: 1271–1276CrossRefGoogle Scholar
  133. 133.
    Fang X, Dong X, Jiang D, et al. Modification of the mechanism for stress-aided grain boundary oxidation ahead of cracks. Oxid Met, 2017, 89: 331–338CrossRefGoogle Scholar
  134. 134.
    Shi S Q, Puls M P. Criteria for fracture initiation at hydrides in zirconium alloys I. Sharp crack tip. J Nucl Mater, 1994, 208: 232–242CrossRefGoogle Scholar
  135. 135.
    Anderson T L. Fracture Mechanics: Fundamentals and Applications. CRC Press, 1995Google Scholar
  136. 136.
    Eshelby J D. The determination of the elastic field of an ellipsoidal inclusion, and related problems. Proc R Soc Lond A, 1957, 241: 376–396MathSciNetzbMATHCrossRefGoogle Scholar
  137. 137.
    Mura T. Micromechanics of Defects in Solids. Leiden: Martinus Nijhoff Publishers, 1987zbMATHCrossRefGoogle Scholar

Copyright information

© Science China Press and Springer-Verlag GmbH Germany, part of Springer Nature 2019

Authors and Affiliations

  1. 1.AML, Department of Engineering MechanicsTsinghua UniversityBeijingChina
  2. 2.Center for Mechanics and MaterialsTsinghua UniversityBeijingChina

Personalised recommendations