Advertisement

Effect of intracellular water release on hydro-mechanical behaviors of high kitchen waste content municipal solid waste

  • XiaoBing Xu
  • Da Ni
  • YunMin Chen
  • Hui XuEmail author
  • QinFeng Yang
  • SiFa Xu
Article
  • 2 Downloads

Abstract

The release of intracellular water during degradation process contributes to the great leachate production and settlement of landfilled high kitchen waste content MSW (HKWC-MSW). An oven-drying and absorbent-paper combined method was proposed to measure the intracellular and interparticle water contents of HKWC-MSW. Two degradation experiments were carried out to study the release process of intracellular water and its effect on the hydro-mechanical behaviors of HKWC-MSW. It was found that the two degradation experiments showed similar degradation behaviors with BOD/COD decreasing with time in the early stage. In the first degradation experiment, most intracellular water was released during the first two months, and the degradation of degradable matter in kitchen waste (KW) was much slower than the release process of intracellular water. The particle size became smaller and the overall grain specific gravity increased during the fast release process of intracellular water. In the second degradation experiment, after two-year degradation, the total leachate production was about 45.2% of the initial wet weight of HKWC-MSW specimen. Water retention capacity θf increased from 0.23 to 0.58 during 1–69 d, which might be caused by the decrease of particle size and compression of waste skeleton. As almost all the intracellular water was released after 80-day degradation, during the latter stage of leachate drainage under gravity, θf decreased and was close to the total volumetric water content. The total compression strain was about 0.39. The secondary compression strain during 1–80 d (i.e., about 0.07) was considered to be mainly resulted by the release of intracellular water and the subsequent drainage of leachate, and it accounted for about 22.6% of the total secondary compression strain.

Keywords

municipal solid waste landfill degradation intracellular water particle size grain specific gravity water retention capacity settlement 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    Gao W, Chen Y, Zhan L, et al. Engineering properties for high kitchen waste content municipal solid waste. J Rock Mech Geotech Eng, 2015, 7: 646–658CrossRefGoogle Scholar
  2. 2.
    Pichtel J. Waste Management Practices: Municipal, Hazardous, and Industrial. CRC Press, 2005Google Scholar
  3. 3.
    He P J. Management and Recycling of Solid Waste (in Chinese). Beijing: Higher Education Press, 2011Google Scholar
  4. 4.
    Lan J W, Zhan L T, Li Y C, et al. Impacts of initial moisture content of MSW waste on leachate generation and modified formula for predicting leachate generation (in Chinese). Environ Sci, 2012, 33: 1389–1396Google Scholar
  5. 5.
    Chen Y M, Zhan T L T, Li Y C. Biochemical, hydraulic and mechanical behaviours of landfills with high-kitchen-waste-content MSW. In: Proceedings of the 7th International Congress on Environmental Geotechnics. Melbourne, 2014. 232–259Google Scholar
  6. 6.
    Blight G. Slope failures in municipal solid waste dumps and landfills: A review. Waste Manag Res, 2008, 26: 448–463CrossRefGoogle Scholar
  7. 7.
    Zhan T L T, Xu X B, Chen Y M, et al. Dependence of gas collection efficiency on leachate level at wet municipal solid waste landfills and its improvement methods in China. J Geotech Geoenviron Eng, 2015, 141: 04015002CrossRefGoogle Scholar
  8. 8.
    Zhan L T, Xu H, Chen Y M, et al. Biochemical, hydrological and mechanical behaviors of high food waste content MSW landfill: Liquid-gas interactions observed from a large-scale experiment. Waste Manage, 2017, 68: 307–318CrossRefGoogle Scholar
  9. 9.
    Durmusoglu E, Corapcioglu M Y, Tuncay K. Modeling of settlement in saturated and unsaturated municipal landfills. Int J Geomech, 2006, 6: 269–278CrossRefGoogle Scholar
  10. 10.
    McDougall J. A hydro-bio-mechanical model for settlement and other behaviour in landfilled waste. Comput Geotech, 2007, 34: 229–246CrossRefGoogle Scholar
  11. 11.
    Hettiarachchi H, Meegoda J, Hettiaratchi P. Effects of gas and moisture on modeling of bioreactor landfill settlement. Waste Manage, 2009, 29: 1018–1025CrossRefGoogle Scholar
  12. 12.
    Chen Y M, Xu X B, Zhan L T. Analysis of solid-liquid-gas interactions in landfilled municipal solid waste by a bio-hydro-mechanical coupled model. Sci China Tech Sci, 2012, 55: 81–89CrossRefGoogle Scholar
  13. 13.
    Zheng W, Phoungthong K, Lü F, et al. Evaluation of a classification method for biodegradable solid wastes using anaerobic degradation parameters. Waste Manage, 2013, 33: 2632–2640CrossRefGoogle Scholar
  14. 14.
    Zhan L T, Xu H, Chen Y M, et al. Biochemical, hydrological and mechanical behaviors of high food waste content MSW landfill: Preliminary findings from a large-scale experiment. Waste Manage, 2017, 63: 27–40CrossRefGoogle Scholar
  15. 15.
    Hoornweg D, Leader T T, Lam P, et al. Waste management in China: Issues and recommendations. Urban Development Working Papers No. 9. Washington: World Bank, 2005Google Scholar
  16. 16.
    Xu X B, Zhan T L T, Chen Y M, et al. Intrinsic and relative permeabilities of shredded municipal solid wastes from the Qizishan landfill, China. Can Geotech J, 2014, 51: 1243–1252CrossRefGoogle Scholar
  17. 17.
    Kjeldsen P, Barlaz M A, Rooker A P, et al. Present and long-term composition of MSW landfill leachate: A review. Critical Rev Environ Sci Tech, 2002, 32: 297–336CrossRefGoogle Scholar
  18. 18.
    Erses A S, Onay T T, Yenigun O. Comparison of aerobic and anaerobic degradation of municipal solid waste in bioreactor landfills. Bioresour Tech, 2008, 99: 5418–5426CrossRefGoogle Scholar
  19. 19.
    Benbelkacem H, Bayard R, Abdelhay A, et al. Effect of leachate injection modes on municipal solid waste degradation in anaerobic bioreactor. Bioresour Tech, 2010, 101: 5206–5212CrossRefGoogle Scholar
  20. 20.
    Cossu R, Lai T, Sandon A. Standardization of BOD5/COD ratio as a biological stability index for MSW. Waste Manage, 2012, 32: 1503–1508CrossRefGoogle Scholar
  21. 21.
    Souza M, Oliveira M, Araujo A, et al. Analyze of the density and viscosity of landfill leachate in different temperatures. Am J Enviro Engin, 2014, 4: 71–74Google Scholar
  22. 22.
    Ministry of Housing and Urban-Rural Development of the People’s Republic of China, State Bureau of Quality and Technical Supervision of the People’s Republic of China. Standard for Soil Test Method GB/T 50123-1999 (in Chinese). Beijing: China Planning Press, 1999Google Scholar
  23. 23.
    Ministry of Housing and Urban-Rural Development of the People’s Republic of China. Technical Code for Geotechnical Engineering of Municipal Solid Waste Sanitary Landfill CJJ176-2012. Beijing: China Architecture & Building Press, 2012Google Scholar
  24. 24.
    Hossain M S, Penmethsa K K, Hoyos L. Permeability of municipal solid waste in bioreactor landfill with degradation. Geotech Geol Eng, 2009, 27: 43–51CrossRefGoogle Scholar
  25. 25.
    Bareither C A, Benson C H, Edil T B. Compression of municipal solid waste in bioreactor landfills: Mechanical creep and biocompression. J Geotech Geoenviron Eng, 2013, 139: 1007–1021CrossRefGoogle Scholar

Copyright information

© Science China Press and Springer-Verlag GmbH Germany, part of Springer Nature 2019

Authors and Affiliations

  • XiaoBing Xu
    • 1
    • 2
  • Da Ni
    • 1
  • YunMin Chen
    • 2
  • Hui Xu
    • 3
    Email author
  • QinFeng Yang
    • 4
  • SiFa Xu
    • 1
  1. 1.Institute of Geotechnical EngineeringZhejiang University of TechnologyHangzhouChina
  2. 2.MOE Key Laboratory of Soft Soils and Geoenvironmental Engineering, Institute of Geotechnical EngineeringZhejiang UniversityHangzhouChina
  3. 3.Department of Civil Engineering & ArchitectureZhejiang Sci-Tech UniversityHangzhouChina
  4. 4.The Architectural Design & Research Institute of Zhejiang University Co. LtdHangzhouChina

Personalised recommendations