Advertisement

A general, fast and robust B-spline fitting scheme for micro-line tool path under chord error constraint

  • QingZhen Bi
  • Jie Huang
  • YaoAn Lu
  • LiMin Zhu
  • Han Ding
Article
  • 10 Downloads

Abstract

The discontinuity of linear tool path (or G01 blocks) brings about unnecessary feedrate deceleration and fluctuation during machining. To improve the continuity, the linear tool path is usually smoothed by the local transition method or the global fitting method. For micro-line tool path, the transition method will significantly decrease the machining efficiency and introduce feedrate fluctuation. The global fitting method cannot be directly used in the NC interpolation because the indispensable chord error checking and iterative fitting processes are computation-intensive. This paper presents a general, fast and robust B-spline fitting scheme under chord error constraint for high speed interpolation of micro-line tool path. The proposed fitting method guarantees the chord error by utilizing the strong convex hull property of B-spline curves. The knot vector and control points are initially generated by a progressive iterative approximation method and locally refined to conform to the chord error constraint by using an analytical method. The analytical approximation and refining methods avoid solving a linear system of equations that is necessary in the standard B-spline fitting method. The feasibility and efficiency of the proposed scheme has been verified via simulations and experiments. Compared with the traditional fitting method, the proposed scheme can strictly constrain the chord error and can significantly decrease the computational load. Compared with the transition scheme, the proposed scheme can significantly increase the machining efficiency for the same micro-line tool path under the same chord error tolerance.

Keywords

NC interpolation high speed machining micro-line segments path smoothing B-spline fitting 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

Supplementary material

11431_2018_9374_MOESM1_ESM.doc (218 kb)
Supplementary material, approximately 219 KB.

References

  1. 1.
    Beudaert X, Lavernhe S, Tournier C. 5-axis local corner rounding of linear tool path discontinuities. Int J Machine Tools Manufacture, 2013, 73: 9–16CrossRefGoogle Scholar
  2. 2.
    Fan W, Lee C H, Chen J H, et al. Real-time Bezier interpolation satisfying chord error constraint for CNC tool path. Sci China Tech Sci, 2016, 59: 203–213CrossRefGoogle Scholar
  3. 3.
    Bi Q Z, Wang Y H, Zhu L M, et al. A practical continuous-curvature Bézier transition algorithm for high-speed machining of linear tool path. In: Proceedings of the 4th International Conference Intelligent Robotics and Applications. Wuhan: Springer, 2011. 465–476CrossRefGoogle Scholar
  4. 4.
    Bi Q Z, Shi J, Wang Y H, et al. Analytical curvature-continuous dual-Bézier corner transition for five-axis linear tool path. Int J Machine Tools Manufacture, 2015, 91: 96–108CrossRefGoogle Scholar
  5. 5.
    Fan W, Lee C H, Chen J H. A realtime curvature-smooth interpolation scheme and motion planning for CNC machining of short line segments. Int J Machine Tools Manufacture, 2015, 96: 27–46CrossRefGoogle Scholar
  6. 6.
    Zhao H, Zhu L M, Ding H. A real-time look-ahead interpolation methodology with curvature-continuous B-spline transition scheme for CNC machining of short line segments. Int J Machine Tools Manufacture, 2013, 65: 88–98CrossRefGoogle Scholar
  7. 7.
    Tulsyan S, Altintas Y. Local toolpath smoothing for five-axis machine tools. Int J Machine Tools Manufacture, 2015, 96: 15–26CrossRefGoogle Scholar
  8. 8.
    Sun S, Lin H, Zheng L, et al. A real-time and look-ahead interpolation methodology with dynamic B-spline transition scheme for CNC machining of short line segments. Int J Adv Manuf Technol, 2015, 32: 88–89Google Scholar
  9. 9.
    Sencer B, Ishizaki K, Shamoto E. A curvature optimal sharp corner smoothing algorithm for high-speed feed motion generation of NC systems along linear tool paths. Int J Adv Manuf Technol, 2014, 76: 1977–1992CrossRefGoogle Scholar
  10. 10.
    Walton D J, Meek D S. G2 blends of linear segments with cubics and Pythagorean-hodograph quintics. Int J Comput Math, 2009, 86: 1498–1511MathSciNetCrossRefzbMATHGoogle Scholar
  11. 11.
    Shi J, Bi Q Z, Zhu L M, et al. Corner rounding of linear five-axis tool path by dual PH curves blending. Int J Machine Tools Manufacture, 2015, 88: 223–236CrossRefGoogle Scholar
  12. 12.
    Xu F, Sun Y. A circumscribed corner rounding method based on double cubic b-splines for a five-axis linear tool path. Int J Adv Manuf Technol, 2018, 94: 451–462CrossRefGoogle Scholar
  13. 13.
    Ye P, Shi C, Yang K, et al. Interpolation of continuous micro line segment trajectories based on look-ahead algorithm in high-speed machining. Int J Adv Manuf Technol, 2008, 37: 881–897CrossRefGoogle Scholar
  14. 14.
    Tajima S, Sencer B. Global tool-path smoothing for CNC machine tools with uninterrupted acceleration. Int J Machine Tools Manufacture, 2017, 121: 81–95CrossRefGoogle Scholar
  15. 15.
    Yau H T, Wang J B. Fast Bezier interpolator with real-time lookahead function for high-accuracy machining. Int J Machine Tools Manufacture, 2007, 47: 1518–1529CrossRefGoogle Scholar
  16. 16.
    Tsai M S, Nien H W, Yau H T. Development of a real-time look-ahead interpolation methodology with spline-fitting technique for high-speed machining. Int J Adv Manuf Technol, 2010, 47: 621–638CrossRefGoogle Scholar
  17. 17.
    Wang Y, Yang D, Liu Y. A real-time look-ahead interpolation algorithm based on Akima curve fitting. Int J Machine Tools Manufacture, 2014, 85: 122–130CrossRefGoogle Scholar
  18. 18.
    Yeh S S, Su H C. Implementation of online NURBS curve fitting process on CNC machines. Int J Adv Manuf Technol, 2009, 40: 531–540CrossRefGoogle Scholar
  19. 19.
    Yuen A, Zhang K, Altintas Y. Smooth trajectory generation for fiveaxis machine tools. Int J Machine Tools Manufacture, 2013, 71: 11–19CrossRefGoogle Scholar
  20. 20.
    Liang F, Zhao J, Ji S, et al. A novel knot selection method for the error-bounded B-spline curve fitting of sampling points in the measuring process. Meas Sci Technol, 2017, 28: 065015CrossRefGoogle Scholar
  21. 21.
    He S, Ou D, Yan C, et al. A chord error conforming tool path B-spline fitting method for NC machining based on energy minimization and LSPIA. J Comput Des Eng, 2015, 2: 218–232Google Scholar
  22. 22.
    Lin H W, Bao H J, Wang G J. Totally positive bases and progressive iteration approximation. Comput Math Appl, 2005, 50: 575–586MathSciNetCrossRefzbMATHGoogle Scholar
  23. 23.
    Lin H. Constructing iterative non-uniform b-spline curve and surface to fit data points. Sci China Ser F, 2004, 47: 315–331MathSciNetzbMATHGoogle Scholar
  24. 24.
    Lu L. Weighted progressive iteration approximation and convergence analysis. Comput Aided Geometric Des, 2010, 27: 129–137MathSciNetCrossRefzbMATHGoogle Scholar
  25. 25.
    Deng C, Lin H. Progressive and iterative approximation for least squares B-spline curve and surface fitting. Comput-Aided Des, 2014, 47: 32–44MathSciNetCrossRefGoogle Scholar
  26. 26.
    Piegl L, Tiller W. The NURBS Book. Monographs in Visual Communication. Berlin, Heidelberg: Springer, 1997'CrossRefzbMATHGoogle Scholar
  27. 27.
    Lee A C, Lin M T, Pan Y R, et al. The feedrate scheduling of NURBS interpolator for CNC machine tools. Comput-Aided Des, 2011, 43: 612–628CrossRefGoogle Scholar
  28. 28.
    Huang J, Zhu L M. Feedrate scheduling for interpolation of parametric tool path using the sine series representation of jerk profile. Proc Institution Mech Engineers Part B-J Eng Manufacture, 2016, 231: 2359–2371CrossRefGoogle Scholar
  29. 29.
    Kineri Y, Wang M, Lin H, et al. B-spline surface fitting by iterative geometric interpolation/approximation algorithms. Comput-Aided Des, 2012, 44: 697–708CrossRefGoogle Scholar
  30. 30.
    Huang J, Du X, Zhu L M. Real-time local smoothing for five-axis linear toolpath considering smoothing error constraints. Int J Machine Tools Manufacture, 2018, 124: 67–79CrossRefGoogle Scholar
  31. 31.
    Jia Z, Song D, Ma J, et al. A NURBS interpolator with constant speed at feedrate-sensitive regions under drive and contour-error constraints. Int J Machine Tools Manufacture, 2017, 116: 1–17CrossRefGoogle Scholar

Copyright information

© Science China Press and Springer-Verlag GmbH Germany, part of Springer Nature 2019

Authors and Affiliations

  • QingZhen Bi
    • 1
  • Jie Huang
    • 1
  • YaoAn Lu
    • 2
  • LiMin Zhu
    • 1
  • Han Ding
    • 1
  1. 1.State Key Laboratory of Mechanical System and Vibration, School of Mechanical EngineeringShanghai Jiao Tong UniversityShanghaiChina
  2. 2.School of Electromechanical EngineeringGuangdong University of TechnologyGuangzhouChina

Personalised recommendations