Advertisement

Assessing potential environmental impact and construction cost of reclaimed masonry walls

  • Deniz Üçer ErduranEmail author
  • Soofia Tahira Elias-Ozkan
  • Aleksey Ulybin
BUILDING COMPONENTS AND BUILDINGS
  • 3 Downloads

Abstract

Purpose

The recovery of building materials and their reuse in new construction should be considered during the design stage of every new project. This study was conducted to quantify the potential environmental impacts and the economic feasibility of reusing waste material in new constructions with an applicable design solution.

Methods

Wall pieces reclaimed from the demolition debris of a historic building in St. Petersburg, Russia, were inspected for potential reuse, and their mechanical strengths were determined through laboratory tests. A proposal for the construction of a reclaimed wall was formulated, which took advantage of the strength of the recovered material and suggested solutions for overcoming its weaknesses. The proposed wall was tested for its potential environmental impact with the help of SimaPro software, and its cost was calculated by using current prices available on the websites of local companies providing materials or services. Finally, the environmental and cost factors of the reclaimed wall were compared with those of an equivalent new masonry wall.

Results and discussion

The strength tests carried out validated the feasibility of reusing the reclaimed wall sections. The results from the life cycle assessment (LCA) models in SimaPro indicated that a wall built with secondary blocks could have a lower environmental impact than one built with new bricks. On the other hand, due to the expensive equipment used in cutting the blocks, the cost of the reclaimed wall was calculated to be nearly 1.9 times the cost of an equivalent wall with new bricks.

Conclusions

LCA simulation of the new wall was conducted with generic datasets belonging to a broader geographical boundary, while those for the reclaimed wall were performed with data obtained from a small-scale case study conducted to determine the feasibility of reusing demolition waste. This study demonstrated that an efficient process for the recovery and reuse of such materials should include a design proposal that takes into consideration the parameters determined from an inspection of the condition of the debris, an assessment of the potential environmental impacts, and an estimation of the related costs. It was further determined that such a design can be instrumental in offering a less costly and more environmentally friendly alternative to dumping the rubble into landfills. The findings of this study will help fill the current gap in the literature regarding the LCA of walls, with a focus on the strength and condition of the wall material after demolition has taken place.

Keywords

Construction cost Life cycle assessment Masonry Reclaimed brick Reusing masonry walls 

Notes

Acknowledgments

We would like to thank Mr. Mehmet Demirci for allowing us to take the masonry boulders from his site, Pré Consultants for providing SimaPro with Ecoinvent database gratis, Çağla Meral Akgül for her guidance, and Gabor Doka for answering critical questions about the LCA methodology. Prof. Dr. Nikolay Ivanovich Vatin, in the Civil Engineering Institute in the Peter the Great Saint-Petersburg Polytechnic University, allowed us the use of laboratory facilities for mechanical tests. Thanks are also due to Sergey Zubkov and Aleksandr Malyshko-Karnauhov for helping with the preparation of samples and conducting the mechanical tests, to Galina Bardina for her help with communication and translation, and lastly to Emrah Erduran for his help with the logistics.

References

  1. Asdrubali F, Baldassarri C, Fthenakis V (2013) Life cycle analysis in the construction sector: guiding the optimization of conventional Italian buildings. Energy Build 64:73–89CrossRefGoogle Scholar
  2. ASTM Standard C1314, 1995 (2014) Standard test method for compressive strength of masonry prisms, ASTM International, West Conshohocken, PA, 2014Google Scholar
  3. Basbagill J, Flager F, Lepech M, Fischer M (2013) Application of life-cycle assessment to early stage building design for reduced embodied environmental impacts. Build Environ 60:81–92CrossRefGoogle Scholar
  4. Blonk Agri-footprint BV Company (2017) [Data Generator of Ecoinvent 3.5 Dataset] Electricity mix, AC, consumption mix, at the consumer, < 1kV/RU MassGoogle Scholar
  5. Condeixa K, Haddad A, Boer D (2014) Life cycle impact assessment of masonry system as inner walls: a case study in Brazil. Constr Build Mater 70:141–147CrossRefGoogle Scholar
  6. Doka G (2009) Life cycle inventories of waste treatment services, part V: building material disposal. In: Ecoinvent report no: 13. Swiss Center for Life Cycle Inventories, DübendorfGoogle Scholar
  7. Ecoinvent Centre (2016) [System; Data Generator] (2010) [Data is reviewed in 2016 last time and validity period is noted as 1992-2016] Ecoinvent 3.3 dataset documentation clay brick production – ROW. [Copyright Ecoinvent Centre, 2016]Google Scholar
  8. Ecoinvent Centre (2016a) [System Data Generator] (2010) [Data is reviewed in 2016 last time and validity period is noted as 1994-2016] Ecoinvent 3.3 dataset documentation cement mortar production – ROW. [Copyright Ecoinvent Centre, 2016]Google Scholar
  9. EN 1052–3 2002 (2007) Methods of test for masonry, part 3: determination of initial shear strength. European Committee for Standardization, Brussels, 2002Google Scholar
  10. Energo Consultancy (2015) Electricity tariffs in St. Petersburg in 2015. Retrieved from http://www.energoconsultant.ru/sprav/tarifi_na_elektroenergiuy_na_2015_god/tarifi_na_elektroener%20giyu_v_sankt_peterburge_2015. Accessed 26 Jan 2016
  11. Eurocode 6, 1996 (2005) Design of masonry structures - part 1–1: general rules for reinforced and unreinforced masonry structures. European Committee for Standardization, Brussels, 2005. [Retrieved from http://www.eurocode6.org/about%20eurocode%206.htm#Link1]. Accessed 8 Feb 2017
  12. GOST [State Standard of Russian Federation] 530, 2007 (2012) General specifications for brick, stone and ceramic units. The Federal Agency on Technical Regulating and Metrology, Russian Federation, p 2012Google Scholar
  13. Franco L (2004) Life cycle assessment of residential buildings, . (unpublished Ph.D. dissertation, Dept. of Civil and Environmental Engineering, Carnegie Mellon University, Pennsylvania, USA)Google Scholar
  14. Golsteijn L [Consultant in Pré Consultance] (n.d.). Interpretation of metrics: DALYs and damage to human health. Retrieved 26 January, 2016, from: https://www.pre-sustainability.com/news/metrics-interpretation-daly-and-damage-to-human-health
  15. GOST 5802 (1986) Mortars, test methods, The Federal Agency on Technical Regulating and Metrology, Russian Federation, 1986Google Scholar
  16. GOST 8462 (1985) Wall materials, methods for determination of ultimate compressive and bending strength, The Federal Agency on Technical Regulating and Metrology, Russian Federation, 1985Google Scholar
  17. Gumaste KS, Nanjunda Rao KS, Venkatarama Reddy BV, Jagadish KS (2007) Strength and elasticity of brick masonry prisms and Wallettes under compression. Material Structure 40(2):241–253CrossRefGoogle Scholar
  18. Hozatli B (2013) Muğla ili koşullarında betonarme ve ahşap malzemeli binaların yaşam döngüsü analizi [Life cycle assessment of buildings constructed with reinforced concrete and wood material in terms of Muğla province]. (Unpublished Ph.D. Dissertation, Ege Universitesi, Turkey)Google Scholar
  19. Humbert S, Schryver AD, Bengoa X, Margni M, Jolliet O (2012) IMPACT 2002+: user guide. Draft for version Q2.21, version adapted by Quantis. Retrieved from https://www.quantis-intl.com/pdf/IMPACT2002_UserGuide_for_vQ2.21.pdf. Accessed 29 Oct 2018
  20. IMF. (2016) Exchange rates. Retrieved from https://www.imf.org/external/np/fin/data/rms_mth.aspx?SelectDate=2016-01-31&reportType=REP. Accessed 26 Jan 2016
  21. ISO (International Organization for Standardization) 1997 (2006) ISO 14040. Environmental management – life cycle assessment – principles and framework, International Organization for Standardization (ISO)Google Scholar
  22. Kinuthia JM, Nidzam RM (2011) Towards zero industrial waste: utilisation of brick dust waste in sustainable construction. Waste Manag 31:1867–1878CrossRefGoogle Scholar
  23. Klopffer W, Grahl B (2014) Life cycle assessment (LCA) a guide to best practice. Wiley-VCH Verlag GmbH & Co, GermanyCrossRefGoogle Scholar
  24. Lawania K, Biswas WK (2018) Application of life cycle assessment approach to deliver low carbon houses at regional level in Western Australia. Build Component Build 23:204–224Google Scholar
  25. Lumantarna R, Biggs DT, Ingham JM (2014) Compressive, flexural bond, and shear bond strengths of in situ New Zealand unreinforced clay brick masonry constructed using lime mortar between the 1880s and 1940s. J Mater Civil Eng 26(4):559–566CrossRefGoogle Scholar
  26. Martínez E, Nuñez Y, Sobaberas E (2013) End-of-life of buildings: three alternatives, two scenarios. A case study. Int J Life Cycle Assess 18:1082–1088CrossRefGoogle Scholar
  27. Napolano L, Menna C, Asprone D, Prota A, Manfredi G (2015) LCA-based study on structural retrofit options for masonry buildings. Build Component Build 20:23–35Google Scholar
  28. Nežerka V, Slížková Z, Tesáreka P, Plachý T, Frankeová D, Petráňová V (2014) Comprehensive study on mechanical properties of lime-based pastes with additions of Metakaolin and brick dust. Cement Concrete Res 64:17–29CrossRefGoogle Scholar
  29. Ortiz O, Bonnet C, Bruno JC, Castells F (2009) Sustainability based on LCM of residential dwellings: a case study in Catalonia, Spain. Build Environ 44(3):584–594CrossRefGoogle Scholar
  30. Pajchrowski G, Noskowiak A, Lewandowska A, Strykowski W (2014) Materials composition or energy characteristic - what is more important in environmental life cycle of buildings? Build Environ 72:15–27CrossRefGoogle Scholar
  31. Park SM (2013) Reusing brick: properties of brick to mortar bond strength (Unpublished Master’s Thesis, Columbia University, USA)Google Scholar
  32. Ponsioen T (2013) What’s new in SimaPro 8? Retrieved from: https://www.pre-sustainability.com/news/publication-whats-new-in-simapro-8. Accessed 29 Oct 2018
  33. Sarangapani G, Venkatarama Reddy BV, Jagadish KS (2005) Brick-mortar bond and masonry compressive strength. J Mater Civil Eng 17(2):229–237CrossRefGoogle Scholar
  34. Silvestre JD, Brito J, Pinheiro MD (2013) From the new European standards to an environmental, energy and economic assessment of building assemblies from cradle-to-cradle (3E-C2C). Energy Build 64:199–208CrossRefGoogle Scholar
  35. SNIP (1987) [II-22-81], Building regulations for stone and reinforced masonry structures, Central Institute of Standard Design [CNIISK Institute], MoscowGoogle Scholar
  36. Ucer D, Ulybin A, Zubkov S, Elias-Ozkan ST (2018) Analysis on the mechanical properties of historical brick masonry after machinery demolition. Constr Build Mater 161:186–195CrossRefGoogle Scholar
  37. Venkatarama Reddy BV, Uday Vyas CV (2008) Influence of shear bond strength on compressive strength and stress–strain characteristics of masonry. Material Struct 41(10):1697–1712CrossRefGoogle Scholar

List of sources, local company websites for prices

  1. Bogorodskiy ceramic wall materials (c2010-2016) products. Retrieved 26 January, 2016, from http://www.keram-kirpich.ru/product/kirpich-keramicheskupolnotelyiodinarnyi-m-100/
  2. Careerjet (c2016) Unskilled construction laborer job announcements. Retrieved 26 January, 2016, from http://www.krasnodar-rabota.ru/vacancy-7049.html
  3. Eurocom (c2016) Solid brick manufacturing. Retrieved 26 January, 2016, from http://gkevrocom.ru/products/847/kirpich-stroitelniy-polnoteliy-defekt-etalon/
  4. Gazelkin. (c2001-2016) Fleet. Retrieved 26 January, 2016, from http://www.gazelkin.ru/company/car/
  5. Megapolis Pro (c2016) Dry mixtures for masonry. Retrieved 26 January, 2016, from http://sukhiesmesi.ru/catalog/kladochnye-smesi
  6. Ozis-Venture Limited Liability Company [Inspection of buildings and structures] (c2004-2019) types of services. Retrieved 21 February, 2019, from http://www.ozis-venture.ru/vidyi-uslug
  7. Perevozka24 (c2007–2016) Freight up to 5 tons in St. Petersburg. Retrieved 26 January, 2016, from http://perevozka24.ru/gruzoperevozki/do-5-tonn/sanktpeterburg
  8. Rabota (c2003-2016) Unskilled construction laborer job announcements. Retrieved 26 January, 2016, from http://www.rabota.ru/vacancy35234556.html
  9. Scm Tehgrupp (2016) Catalog. Retrieved from http://slavcem.ru/. Accessed 26 Jan 2016
  10. Stroy Expert (c2003-2016) The cost of building materials and designs in testing laboratory. Retrieved 26 January, 2016, from http://teoc.ru/prices/
  11. StroyMetKom (n.d.) Price list. Retrieved 26 January, 2016, from http://www.smkom. ru/Products.html
  12. Vniro (c2011) Cost of work. Retrieved 26 January, 2016, from http://www.vnir.ru/isllab.php
  13. Visor (n.d.) Price list. Retrieved 26 January, 2016, from http://evromash.spb.ru/pages/247/
  14. VVT-M Limited Liability Company. (n.d.) Diamond blades Retrieved 21 February, 2019, https://www.egazon.ru/good/303751?utm_medium=cpc&utm_source=google&utm_campaign=reg-tovar-merchant-smart|1559324870&utm_term=&utm_content=pla293946777986|cid|1559324870|aid|294833524210|gid|62833584607|pos||src|u_|dvc|c|reg|9047067|rin||&id=62833584607|pla-293946777986&gclid=Cj0KCQiAtbnjBRDBARIsAO3zDl87gg3pEBujJmlZ2ibocSTjRcMKM3B4PATBRjo5WFCxRHyknnw110caAqgNEALw_wcBGoogle Scholar
  15. Yandex Taxi (n.d.) Transportation price calculator. Retrieved 26 January, 2016, from: https://taxi.yandex.ru/#index

Copyright information

© Springer-Verlag GmbH Germany, part of Springer Nature 2019

Authors and Affiliations

  1. 1.Faculty of ArchitectureMiddle East Technical UniversityAnkaraTurkey
  2. 2.Institute of Civil EngineeringPeter the Great Saint-Petersburg Polytechnic UniversitySt. PetersburgRussia

Personalised recommendations