Advertisement

Environmental improvement of lead refining: a case study of water footprint assessment in Jiangxi Province, China

  • Donglu Yang
  • Yongquan Yin
  • Xiaotian Ma
  • Ruirui Zhang
  • Yijie Zhai
  • Xiaoxu Shen
  • Jinglan HongEmail author
WATER USE IN LCA
  • 51 Downloads

Abstract

Purpose

China is currently facing water scarcity due to its large national population and rapid economic development. Lead is a typical non-ferrous metal. The lead industry is one of the top 10 water-consuming industries in China and suffers from the heavy burden of properly managing discharged wastewater containing heavy metals and organic pollutants. Accordingly, a water footprint analysis of lead refining was conducted in this study to enhance the water management in China’s lead industry. This study is part 2 of the environmental improvement for lead-refining series.

Methods

In accordance with the ISO 14046 standard, life cycle assessment-based water footprint analysis was applied to a lead-refining enterprise in Jiangxi Province, China. Five midpoint (i.e., water scarcity, aquatic eutrophication, carcinogens, non-carcinogens, and freshwater ecotoxicity) and two endpoint (i.e., human health and ecosystem quality) indicators are utilized to assess the water footprint impact results.

Results and discussion

Direct pollutant emissions are a major contributor to ecosystem quality and freshwater ecotoxicity, whereas indirect processes (i.e., industrial hazardous waste landfill, transport, and chemicals) contribute considerably to human health, aquatic eutrophication, and carcinogen categories. Chromium, copper, arsenic, and zinc were the key substances in the lead production chain, and their emissions exerted a significant impact on human health and ecosystem quality.

Conclusions

Reducing direct copper emission was the most important key to minimizing ecosystem quality decline in China’s lead industry, and optimizing indirect processes was effective in mitigating the impact on human health. Enhancing wastewater treatment, increasing chemical consumption efficiency, optimizing transport and industrial hazardous waste disposal, improving supervision, issuing relevant governmental regulations, and adopting advanced wastewater treatment technologies are urgently needed to control the water footprint.

Keywords

Direct pollutant emission Lead refining Life cycle assessment Water footprint Water resource 

Notes

Acknowledgements

We acknowledge financial support from the National Key Research and Development Program of China (Grant No. 2017YFF0206702; 2017YFF0211605), National Natural Science Foundation of China (Grant No. 71671105), Major Basic Research Projects of the Shandong Natural Science Foundation (ZR2018ZC2362), and the Fundamental Research Funds of Shandong University, China (2018JC049).

Supplementary material

11367_2018_1578_MOESM1_ESM.docx (251 kb)
ESM 1 (DOCX 250 kb)

References

  1. Bai X, Ren X, Khanna NZ, Zhou N, Hu M (2018) Comprehensive water footprint assessment of the dairy industry chain based on ISO 14046: a case study in China. Resour Conserv Recy 132:369–375CrossRefGoogle Scholar
  2. Berger M, Warsen J, Krinke S, Bach V, Finkbeiner M (2012) Water footprint of European cars: potential impacts of water consumption along automobile life cycles. Environ Sci Technol 46(7):4091–4099CrossRefGoogle Scholar
  3. Berger M, van der Ent R, Eisner S, Bach V, Finkbeiner M (2014) Water accounting and vulnerability evaluation (WAVE): considering atmospheric evaporation recycling and the risk of freshwater depletion in water footprinting. Environ Sci Technol 48(8):4521–4528CrossRefGoogle Scholar
  4. Berger M, Eisner S, van der Ent R, Floerke M, Link A, Poligkeit J, Finkbeiner M (2018) Enhancing the water accounting and vulnerability evaluation model: WAVE+. Environ Sci Technol 52(18):10757–10766CrossRefGoogle Scholar
  5. Bonamente E, Scrucca F, Asdrubali F, Cotana F, Presciutti A (2015) The water footprint of the wine industry: implementation of an assessment methodology and application to a case study. Sustainability-Basel 7(9):12190–12208CrossRefGoogle Scholar
  6. Boulay A, Bulle C, Bayart J, Deschênes L, Margni M (2011) Regional characterization of freshwater use in LCA: modeling direct impacts on human health. Environ Sci Technol 45(20):8948–8957CrossRefGoogle Scholar
  7. Boulay A, Motoshita M, Pfister S, Bulle C, Munoz I, Franceschini H, Margni M (2014) Analysis of water use impact assessment methods (part A): evaluation of modeling choices based on a quantitative comparison of scarcity and human health indicators. Int J Life Cycle Assess 20:139–160CrossRefGoogle Scholar
  8. Boulay A, Bare J, Benini L, Berger M, Lathuillière M, Manzardo A, Margni M, Motoshita M, Núñez M, Pastor A, Ridoutt B, Oki T, Worbe S, Pfister S (2018) The WULCA consensus characterization model for water scarcity footprints: assessing impacts of water consumption based on available water remaining (AWARE). Int J Life Cycle Assess 23(2):368–378CrossRefGoogle Scholar
  9. Brandt A, Dale M, Barnhart C (2013) Calculating systems-scale energy efficiency and net energy returns: a bottom-up matrix-based approach. Energy 62:235–247CrossRefGoogle Scholar
  10. Buxmann K, Koehler A, Thylmann D (2016) Water scarcity footprint of primary aluminium. Int J Life Cycle Assess 21(11):1605–1615CrossRefGoogle Scholar
  11. Caldeira C, Quinteiro P, Castanheira E, Boulay A, Dias A, Arroja L, Freire F (2018) Water footprint profile of crop-based vegetable oils and waste cooking oil: comparing two water scarcity footprint methods. J Clean Prod 195:1190–1202CrossRefGoogle Scholar
  12. Cao X, Wu M, Guo X, Zhang Y, Gong Y, Wu N, Wang W (2017) Assessing water scarcity in agricultural production system based on the generalized water resources and water footprint framework. Sci Total Environ 609:587–597CrossRefGoogle Scholar
  13. Chapagain AK, Hoekstra AY (2011) The blue, green and gray water footprint of rice from production and consumption perspectives. Ecol Econ 70(4):749–758CrossRefGoogle Scholar
  14. CPLCID (2015) Chinese process-based life cycle inventory database. Available from: http://www.huanke.sdu.edu.cn/info/1024/3400.htm. Accessed 4 May 2018
  15. de Miguel Á, Hoekstra AY, García-Calvo E (2015) Sustainability of the water footprint of the Spanish pork industry. Ecol Indic 57:465–474CrossRefGoogle Scholar
  16. Ecoinvent Centre (2014) Swiss centre for life cycle inventories. Zurich, SwitzerlandGoogle Scholar
  17. EPA (1989) Aluminum, copper, and nonferrous metals forming and metal powder pretreatment standards—a guidance manual. Environmental Protection Agency of United States, Washington, USAGoogle Scholar
  18. Feng K, Chapagain A, Suh S, Pfister S, Hubacek K (2011) Comparison of bottom-up and top-down approaches to calculating the water footprints of nations. Econ Syst Res 23(4):371–385CrossRefGoogle Scholar
  19. GET (2017) Gravitate engineering and technology. Available from: http://www.gravitatechnomech.com/Lead-Metal/usesofLead.html. Accessed 4 May 2018
  20. Hong JL, Zhang FF, Xu CQ, Xu X, Li XZ (2015) Evaluation of life cycle inventory at macro level: a case study of mechanical coke production in China. Int J Life Cycle Assess 20(6):751–764CrossRefGoogle Scholar
  21. Hong JL, Yu Z, Shi W, Hong JM, Qi CC, Ye LP (2017a) Life cycle environmental and economic assessment of lead refining in China. Int J Life Cycle Assess 22(6):909–918CrossRefGoogle Scholar
  22. Hong JL, Han X, Chen Y, Wang M, Ye LP, Qi CC, Li XL (2017b) Life cycle environmental assessment of industrial hazardous waste incineration and landfilling in China. Int J Life Cycle Assess 22(7):1054–1064CrossRefGoogle Scholar
  23. Huijbregts M, Hauschild M, Jolliet O, Margni M, McKone T, Rosenbaum RK, Meent D (2010) USEtox™ user manual v. 1.01. USEtox International Center, San FranciscoGoogle Scholar
  24. Huijbregts M, Steinmann Z, Elshout P, Stam G, Verones F, Vieira M, Zijp M, Hollander A, van Zelm R (2017) ReCiPe2016: a harmonised life cycle impact assessment method at midpoint and endpoint level. Int J Life Cycle Assess 22(2):138–147CrossRefGoogle Scholar
  25. ISO (2014) Environmental management—water footprint—principles, requirements and guidelines. International Organization for Standardization 14046, Geneva, SwitzerlandGoogle Scholar
  26. Kaabi R, Abderrabba M, Gómez-Ruiz S, del Hierro I (2016) Bioinspired materials based on glutathione-functionalized SBA-15 for electrochemical Cd (II) detection. Micropor Mesopor Mat 234:336–346CrossRefGoogle Scholar
  27. Kim MJ, Ahn KH, Jung Y, Lee S, Lim BR (2003) Arsenic, cadmium, chromium, copper, lead, and zinc contamination in mine tailings and nearby streams of three abandoned mines from Korea. Bull Environ Contam Toxicol 70(5):0942–0947CrossRefGoogle Scholar
  28. Li Y, Liu Z, Liu H, Peng B (2017) Clean strengthening reduction of lead and zinc from smelting waste slag by iron oxide. J Clean Prod 143:311–318CrossRefGoogle Scholar
  29. Ma XT, Yang DL, Shen XX, Zhai YJ, Zhang RR, Hong JL (2018a) How much water is required for coal power generation: an analysis of gray and blue water footprints. Sci Total Environ 636:547–557CrossRefGoogle Scholar
  30. Ma XT, Shen XX, Qi CC, Ye LP, Yang DL, Hong JL (2018b) Energy and carbon coupled water footprint analysis for Kraft wood pulp paper production. Renew Sust Energ Rev 96:253–261CrossRefGoogle Scholar
  31. Manzardo A, Ren J, Piantella A, Mazzi A, Fedele A, Scipioni A (2014) Integration of water footprint accounting and costs for optimal chemical pulp supply mix in paper industry. J Clean Prod 72:167–173CrossRefGoogle Scholar
  32. MEPC (2009a) Cleaner production standard—lead smelting industry (HJ 512-2009). Ministry of Environmental Protection of the People’s Republic of China, Beijing, ChinaGoogle Scholar
  33. MEPC (2009b) Cleaner production standard—lead electro-refining industry (HJ 513-2009). Ministry of Environmental Protection of the People’s Republic of China, Beijing, ChinaGoogle Scholar
  34. MEPC (2010) Emission standard of pollutants for lead and zinc industry (GB 25466-2010). The Ministry of Environmental Protection of the People’s Republic of China, Beijing, ChinaGoogle Scholar
  35. MEPH (2011) Emission standard of pollutants for lead smelting industry. (DB 41/684-2011) Ministry of Environmental Protection of Henan province, Zhengzhou, ChinaGoogle Scholar
  36. NBSC (2008) China economic census yearbook. National Bureau of Statistics of the People's Republic of China, Beijing, ChinaGoogle Scholar
  37. NBSC (2015) China statistical yearbook of 2015. National Bureau of Statistics of the People's Republic of China, Beijing, ChinaGoogle Scholar
  38. NBSC (2016a) China environmental statistical yearbook of 2016. National Bureau of Statistics of the People's Republic of China Beijing, ChinaGoogle Scholar
  39. NBSC (2016b) China statistical yearbook of 2016. National Bureau of statistics of the People's Republic of China. Beijing, ChinaGoogle Scholar
  40. Northey SA, Haque N, Lovel R, Cooksey MA (2014) Evaluating the application of water footprint methods to primary metal production systems. Miner Eng 69:65–80CrossRefGoogle Scholar
  41. Peña CA, Huijbregts MA (2014) The blue water footprint of primary copper production in northern Chile. J Ind Ecol 18(1):49–58CrossRefGoogle Scholar
  42. Pfister S, Saner D, Koehler A (2011) The environmental relevance of freshwater consumption in global power production. Int J Life Cycle Assess 16(6):580–591CrossRefGoogle Scholar
  43. Pfister S, Boulay A, Berger M, Hadjikakou M, Motoshita M, Hess T et al (2017) Understanding the LCA and ISO water footprint: a response to Hoekstra (2016) “A critique on the water-scarcity weighted water footprint in LCA”. Ecol Indic 72:352–359CrossRefGoogle Scholar
  44. Plouffe G, Bulle C, Deschĕnes L (2012) Including metal speciation in LCA terrestrial ecotoxicity: new regionalised characterization factors. SETAC Europe 22nd Annual Meeting. In 6th SETAC World Congress, BerlinGoogle Scholar
  45. Qi CC, Ye LP, Ma XT, Yang DL, Hong JL (2017) Life cycle assessment of the hydrometallurgical zinc production chain in China. J Clean Prod 156:451–458CrossRefGoogle Scholar
  46. Statistic (2018a) Lead metal production from 2004 to 2016. Available from: https://www.statista.com/statistics/264872/world-production-of-lead-metal/. Accessed 4 May 2018
  47. Statistic (2018b) Lead metal production by country. Available from: https://www.statista.com/statistics/264632/lead-mine-production-by-country/. Accessed 4 May 2018
  48. The WULCA group (2017) The AWARE model (Available water remaining). Available from: http://www.wulca-waterlca.org. Accessed 4 May 2018
  49. Wang L, Ding X, Wu X (2013) Blue and gray water footprint of textile industry in China. Water Sci Technol 68(11):2485–2491CrossRefGoogle Scholar
  50. WBG (2014) Renewable internal freshwater resources per capita. World Bank Group, Washington, USAGoogle Scholar
  51. Xue S, Shi L, Wu C, Wu H, Qin Y, Pan W, Hartley W, Cui M (2017) Cadmium, lead, and arsenic contamination in paddy soils of a mining area and their exposure effects on human HEPG2 and keratinocyte cell-lines. Environ Res 156:23–30CrossRefGoogle Scholar
  52. Yan Y, Jia J, Zhou K, Wu G (2013) Study of regional water footprint of industrial sectors: the case of Chaoyang City, Liaoning Province, China. Int J Sust Dev World 20(6):542–548CrossRefGoogle Scholar
  53. Yearbook of nonferrous metals industry of China in 2015 (2016) Nonferrous Metals Industry Association, Beijing, ChinaGoogle Scholar
  54. Zhang X, Yang L, Li Y, Li H, Wang W, Ye B (2012) Impacts of lead/zinc mining and smelting on the environment and human health in China. Environ Monit Assess 184(4):2261–2273CrossRefGoogle Scholar

Copyright information

© Springer-Verlag GmbH Germany, part of Springer Nature 2019

Authors and Affiliations

  • Donglu Yang
    • 1
  • Yongquan Yin
    • 1
  • Xiaotian Ma
    • 1
  • Ruirui Zhang
    • 1
  • Yijie Zhai
    • 1
  • Xiaoxu Shen
    • 1
  • Jinglan Hong
    • 1
    Email author
  1. 1.Shandong Provincial Key Laboratory of Water Pollution Control and Resource Reuse, School of Environmental Science and EngineeringShandong UniversityQingdaoPeople’s Republic of China

Personalised recommendations