Advertisement

Radial Inertia Effect on Dynamic Compressive Response of Polymeric Foam Materials

  • B. Song
  • B. Sanborn
  • W.-Y. Lu
Article
  • 37 Downloads

Abstract

Polymeric foams have been extensively used in shock isolation applications because of their superior shock or impact energy absorption capability. However, as a type of soft condensed matter, the highly nonlinear, heterogeneous, and dissipative behavior of polymeric foams may result in an ineffective mitigation or isolation to shock/blast loading. To meet certain desired shock mitigation or isolation requirements, the polymeric foams need to be experimentally characterized to obtain their intrinsic material response. However, radial inertia during dynamic compression has become a severe issue and needs to be fully understood. In this study, we developed an analytical method to calculate the additional stress induced by radial inertia in a polymeric foam specimen. The radial inertia is generally caused by Poisson’s effect and associated with three different mechanisms – axial strain acceleration, large deformation, and Poisson’s ratio change. The effect of Poisson’s ratio change during deformation on radial inertia was specifically investigated for hyperelastic foam materials, and verified with experimental results obtained from Kolsky compression bar tests on a silicone foam.

Keywords

Radial inertia Poisson’s ratio Dynamic response Polymeric foam Split Hopkinson pressure bar (SHPB) Kolsky bar 

Notes

Acknowledgements

Sandia National Laboratories is a multimission laboratory managed and operated by National Technology and Engineering Solutions of Sandia, LLC, a wholly owned subsidiary of Honeywell International, Inc., for the U.S. Department of Energy’s National Nuclear Security Administration under contract DE-NA0003525. The views expressed in the article do not necessarily represent the views of the U.S. Department of Energy or the United States Government.

References

  1. 1.
    Gibson LJ, Ashby MF (1999) Cellular solids, structure and properties, 2nd edn. Cambridge University Press, CambridgezbMATHGoogle Scholar
  2. 2.
    Zhang Z, Ming F, Zhang A (2014) Damage characteristics of coated cylindrical shells subjected to underwater contact explosion. Shock Vib 2014:763607Google Scholar
  3. 3.
    Rabe JA, Spells S, Rasch DM, Homan GR, Lee CL (1981) Evaluation of silicone foam for flat plate solar collector insulation. Sol Energy Mater 4:159–168CrossRefGoogle Scholar
  4. 4.
    Blood RP, Ploger JD, Yost MG, Ching RP, Johnson PW (2010) Whole body vibration exposures in metropolitan bus drivers: a comparison of three seats. J Sound Vib 329:109–120CrossRefGoogle Scholar
  5. 5.
    Nesterenko VF (2001) Dynamics of heterogeneous materials. Springer, New YorkCrossRefGoogle Scholar
  6. 6.
    Nesterenko VF (2003) Shock (blast) mitigation by “soft” condensed matter. Mater Res Soc Symp Proc 759:135–146Google Scholar
  7. 7.
    Song B, Chen W, Lu W-Y (2007) Compressive mechanical response of a low-density epoxy foam at various strain rates. J Mater Sci 42:7502–7507CrossRefGoogle Scholar
  8. 8.
    Song B, Lu W-Y, Syn CJ, Chen W (2009) The effects of strain rate, density, and temperature on the mechanical properties of polymethylene diisocyanate (PMDI)-based rigid polyurethane foams during compression. J Mater Sci 44:351–357CrossRefGoogle Scholar
  9. 9.
    Song B, Chen W, Yanagita T, Frew DJ (2005) Confinement effects on the dynamic compressive properties of an epoxy syntactic foam. Compos Struct 67:279–287CrossRefGoogle Scholar
  10. 10.
    Song B, Chen W, Yanagita T, Frew DJ (2005) Temperature effects on dynamic compressive behavior of an epoxy syntactic foam. Compos Struct 67:289–298CrossRefGoogle Scholar
  11. 11.
    Chen W, Song B (2011) Split Hopkinson (Kolsky) Bar: design, testing and applications. Springer, New YorkCrossRefGoogle Scholar
  12. 12.
    Song B, Chen W (2005) Split Hopkinson pressure bar techniques for characterizing soft materials. Lat Am J Solids Struct 2:113–152Google Scholar
  13. 13.
    Song B, Chen W, Jiang X (2005) Split Hopkinson pressure bar experiments on polymeric foams. Int J Veh Des 37:185–198CrossRefGoogle Scholar
  14. 14.
    Song B, Chen WW, Ge Y, Weerasooriya T (2007) Radial inertia effects in Kolsky bar testing of extra-soft materials. Exp Mech 47:659–670CrossRefGoogle Scholar
  15. 15.
    Sanborn B, Nie X, Chen W, Weerasooriya T (2012) Inertia effects on characterization of dynamic response of brain tissue. J Biomech 45:434–439CrossRefGoogle Scholar
  16. 16.
    Dharan CKH, Hauser FE (1970) Determination of stress-strain characteristics at very high strain rates. Exp Mech 10:370–376CrossRefGoogle Scholar
  17. 17.
    Kolsky H (1949) An investigation of the mechanical properties of materials at very high rates of loading. Proc R Soc Lond B62:676–700Google Scholar
  18. 18.
    Forrestal MJ, Wright TW, Chen W (2007) The effect of radial inertia on brittle samples during the split Hopkinson pressure bar test. Int J Impact Eng 34:405–411CrossRefGoogle Scholar
  19. 19.
    Li QM, Meng H (2003) About the dynamic strength enhancement of concrete-like materials in a split Hopkinson pressure bar test. Int J Solids Struct 40:343–360CrossRefGoogle Scholar
  20. 20.
    Holland CC, McMeeking RM (2015) The influence of mechanical and microstructural properties on the rate-dependent fracture strength of ceramics in uniaxial compression. Int J Impact Eng 81:34–49CrossRefGoogle Scholar
  21. 21.
    Rubin MB, Rodríguez-Martínez JA (2014) The effect of radial inertia on flow localization in ductile rods subjected to dynamic extension. Int J Impact Eng 69:157–164CrossRefGoogle Scholar
  22. 22.
    Nishida EE (2010) Distinguishing inertia effects from the intrinsic mechanical behavior of soft materials at high strain rates by Kolsky bar experiments. Master Thesis, Purdue UniversityGoogle Scholar
  23. 23.
    Zhang M, Li QM, Huang FL, Wu HJ, Lu YB (2010) Inertia-induced radial confinement in an elastic tubular specimen subjected to axial strain acceleration. Int J Impact Eng 37:459–464CrossRefGoogle Scholar
  24. 24.
    Warren TL, Forrestal MJ (2010) Comments on the effect of radial inertia in the Kolsky bar test for an incompressible material. Exp Mech 50:1253–1255CrossRefGoogle Scholar
  25. 25.
    Malvern LE (1969) Introduction to the mechanics of a continuous medium. Prentice-Hall, Englewood CliffsGoogle Scholar
  26. 26.
    Guduru PR, Freund LB (2002) The dynamics of multiple neck formation and fragmentation in high rate extension of ductile materials. Int J Solids Struct 39:5615–5632CrossRefGoogle Scholar
  27. 27.
    Sanborn B, and Song B, (2018) Quasi-static and dynamic Poisson’s ratio evolution of hyperelastic foams. 2018 SEM Annual Conference and Exposition on Experimental and Applied Mechanics, June 4–7, 2018, GreenvilleGoogle Scholar
  28. 28.
    Sanborn B, Song B (2018) Poisson’s ratio of a hyperelastic foam under quasi-static and dynamic loading. Int J Impact Eng.  https://doi.org/10.1016/j.ijimpeng.2018.06.001 CrossRefGoogle Scholar
  29. 29.
    Casem D, Weerasooriya T, Moy P (2005) Inertial effects of quartz force transducers embedded in a split Hopkinson pressure bar. Exp Mech 45:368–376CrossRefGoogle Scholar
  30. 30.
    Lu W-Y (2015) Compression of silicone foams. 2015 SEM Annual Conference and Exposition on Experimental and Applied Mechanics. June 8–11, 2015, Costa MesaGoogle Scholar

Copyright information

© This is a U.S. government work and its text is not subject to copyright protection in the United States; however, its text may be subject to foreign copyright protection 2018

Authors and Affiliations

  1. 1.Sandia National LaboratoriesAlbuquerqueUSA
  2. 2.Sandia National LaboratoriesLivermoreUSA

Personalised recommendations