Advertisement

Wireless Personal Communications

, Volume 109, Issue 4, pp 2251–2262 | Cite as

Miniaturized Microstrip Patch Antenna Array for ISM Band Using Complementary Split Ring Resonator

  • Monish GuptaEmail author
  • Vikas Mittal
  • Jyoti Saxena
  • Sushma Gupta
Article
  • 26 Downloads

Abstract

These days patch antenna arrays are widely used in various communication systems. In this research design of miniaturized microstrip patch antenna array is presented. Miniaturization is achieved by reducing the mutual coupling between patch antenna elements. Complementary Split Ring Resonator is used to reduce the mutual coupling between patch elements in array. The mutual coupling between patch elements with and without resonator is calculated using High Frequency Structure Simulator. It has been observed that the mutual coupling between elements is reduced by 20 dB at 2.4 GHz by using resonator. Due to reduction in mutual coupling, patch antenna elements can be fabricated in less space which leads to compact antenna array system design. A miniaturization of 4.34% is achieved for two element Patch array without affecting the power gain and directivity of patch antenna array.

Keywords

Patch antenna Complementary Split Ring Resonator (CSRR) Metamaterial Wilkinson power divider 

Notes

References

  1. 1.
    Nikolic, M. M., Djordjevic, A. R., & Nehorai, A. (2005). Microstrip antennas with suppressed radiation in horizontal directions and reduced coupling. IEEE Transactions on Antennas and Propagation,53, 3469–3476.CrossRefGoogle Scholar
  2. 2.
    Alexopoulos, N., & Jackson, D. (1984). Fundamental superstrate (cover) effects on printed circuit antennas. IEEE Transactionson Antennas and Propagation,32, 807–816.CrossRefGoogle Scholar
  3. 3.
    Sievenpiper, D., Lijun, Z., Broas, R. F. J., Alexopolous, N. G. A. A. N. G., & Yablonovitch, E. A. Y. E. (1999). High-impedance electromagnetic surfaces with a forbidden frequency band. IEEE Transactions on Microwave Theory and Techniques,47, 2059–2074.CrossRefGoogle Scholar
  4. 4.
    Ang, Y & Xuexia, Z. (2002). A novel 2-D electromagnetic band-gap structure and its application in micro-strip antenna arrays. In 3rd international conference on microwave and millimeter wave technology proceedings (pp. 580–583).Google Scholar
  5. 5.
    Fan, Y., & Rahmat-Samii, Y. (2003). Microstrip antennas integrated with electromagnetic band-gap (EBG) structures: A low mutual coupling design for array applications. IEEE Transactions on Antennas and Propagation,51, 2936–2946.CrossRefGoogle Scholar
  6. 6.
    Abedin, M. F., & Ali, M. (2005). Reducing the mutual-coupling between the elements of a printed dipole array using planar EBG structures. IEEE Antennas and Propagation Society International Symposium,2A, 598–601.CrossRefGoogle Scholar
  7. 7.
    Falcone, F., Lopetegi, T., Baena, J. D., Marques, R., Martin, F., & Sorolla, M. (2004). Effective negative-ε stopband microstrip lines based on complementary split-ring resonators. IEEE Microwave and Wireless Components Letters,14, 280–282.CrossRefGoogle Scholar
  8. 8.
    Burokur, S. N., Latrach, M., & Toutain, S. (2005). Study of the effect of dielectric split-ring resonators on microstrip-line transmission. Microwave and Optical Technology Letters,44, 445–448.CrossRefGoogle Scholar
  9. 9.
    Garcia-Garcia, J., Bonache, J., Gil, I., Martin, F., Marques, R., Falcone, F., et al. (2005). Comparison of electromagnetic band gap and split-ring resonator microstrip lines as stop band structures. Microwave and Optical Technology Letters,44, 376–379.CrossRefGoogle Scholar
  10. 10.
    Garcia-Garcia, J., Martin, F., Falcone, F., Bonache, J., Baena, J. D., Gil, I., et al. (2005). Microwave filters with improved stopband based on sub-wavelength resonators. IEEE Transactions on Microwave Theory and Techniques,53, 1997–2006.CrossRefGoogle Scholar
  11. 11.
    Martel, J., Marques, R., Falcone, F., Baena, J. D., Medina, F., Martin, F., et al. (2004). A new LC series element for compact bandpass filter design. IEEE Microwave and Wireless Components Letters,14, 210–212.CrossRefGoogle Scholar
  12. 12.
    Bonache, J., Martin, F., Gil, I., Garcia-Garcia, J., Marques, R., & Sorolla, M. (2005). Microstrip bandpass filters with wide bandwidth and compact dimensions. Microwave and Optical Technology Letters,46, 343–346.CrossRefGoogle Scholar
  13. 13.
    Bonache, J., Gil, I., Garcia-Garcia, J., & Martin, F. (2006). Novel microstrip bandpass filters based on complementary split-ring resonators. IEEE Transactions on Microwave Theory and Techniques,54, 265–271.CrossRefGoogle Scholar
  14. 14.
    Garg, R., Bahal, I., & Bozzi, M. Microstrip lines and slotlines (Book 2013)  (3rd Ed.), Artech house microwave library.Google Scholar

Copyright information

© Springer Science+Business Media, LLC, part of Springer Nature 2019

Authors and Affiliations

  1. 1.University Institute of Engineering and TechnologyKurukshetra UniversityKurukshetraIndia
  2. 2.National Institute of Technology, KurukshetraKurukshetraIndia
  3. 3.Gaini Zail Singh Campus College of Engineering and TechnologyBathindaIndia
  4. 4.Swami Devi Dyal Institute of Engineering and TechnologyBarwalaIndia

Personalised recommendations