Advertisement

Water, Air, & Soil Pollution

, 230:45 | Cite as

Chromium Speciation in Water Samples by Loading a New Sulfide-Containing Biodegradable Polymer Adsorbent in Tip of the Syringe System

  • Jamshed Ali
  • Mustafa TuzenEmail author
  • Baki Hazer
  • Tasneem G. Kazi
Article

Abstract

A new adsorbent poly-3-hydroxybutyrate-2-(dodecylthiocarbonothioylthio)-2-methylpropionate triester (PH-DTT-MPT) was first time loaded in a micropipette tip for speciation of chromium in different water samples. Total chromium (Cr), trivalent chromium (CrIII), and hexavalent chromium (CrVI) in different natural water samples were determined by electrothermal atomic absorption spectrometry. Known concentration of CrIII and CrVI was passed through a biodegradable polymer for investigation of the behavior of the newly used adsorbent. The newly used copolymer absorbed the CrIII on surface of the PH-DTT-MPT at pH 7.0, while CrVI was not adsorbed in desired pH value. After passing the real and standard solutions through the micropipette, then 2.0 mol L−1 HCl was used for elution of CrIII from the biodegradable polymer. Total Cr was calculated after reducing CrVI into CrIII by specific concentration of hydroxy ammonium chloride (HONH2·HCl). The concentration of CrVI in different natural water samples was estimated after back calculation of CrIII from total chromium. Effect of analytical parameters like adsorbent, pH, eluent, sample volume, flow rates, and interfering ions was also studied. The LOD, LOQ, RSD, and EF of the developed method were calculated as 6.1 ng L−1, 20 ng L−1, 1.17%, and 90, respectively. Validation of developed method was checked by certified reference materials and spiking addition method. The developed method was successfully applied for determination of total Cr, CrIII, and CrVI in various natural water ecosystems.

Keywords

Chromium speciation Water PH-DTT-MPT Micropipette and syringe system 

Notes

Acknowledgements

Authors would like to thank Tokat Gaziosmanpasa University for providing excellent research facilities to conduct this type of research work.

Funding information

Author Jamshed Ali would like to thank the scientific and technological council of Turkey for the provided scholarship. The code of awarded scholarship is TUBITAK-2216 research fellowship program for foreigner citizens. We also thank the Bulent Ecevit University Research Funds (#BEU-2017-72118496-01) for financial support. Dr. Mustafa Tuzen thanks the Turkish Academy of Sciences for financial support.

References

  1. Ahalya, N., Kanamadi, R., & Ramachandra, T. (2005). Biosorption of chromium (VI) from aqueous solutions by the husk of Bengal gram (Cicer arientinum). Electronic Journal of Biotechnology, 8, 0–0.CrossRefGoogle Scholar
  2. Akkaya, T., Gülfen, M., & Olgun, U. (2013). Adsorption of rhodium (III) ions onto poly (1, 8-diaminonaphthalene) chelating polymer: equilibrium, kinetic and thermodynamic study. Reactive and Functional Polymers, 73, 1589–1596.CrossRefGoogle Scholar
  3. Ali, J., Kazi, T. G., Baig, J. A., Afridi, H. I., Arain, M. S., Ullah, N., Brahman, K. D., Arain, S. S., & Panhwar, A. H. (2015). Evaluation of the fate of arsenic-contaminated groundwater at different aquifers of Thar coalfield Pakistan. Environmental Science and Pollution Research, 22, 19251–19263.CrossRefGoogle Scholar
  4. Ali, J., Tuzen, M., Kazi, T. G., & Hazer, B. (2016). Inorganic arsenic speciation in water samples by miniaturized solid phase microextraction using a new polystyrene polydimethyl siloxane polymer in micropipette tip of syringe system. Talanta, 161, 450–458.CrossRefGoogle Scholar
  5. Ambushe, A. A., McCrindle, R. I., & McCrindle, C. M. (2009). Speciation of chromium in cow’s milk by solid-phase extraction/dynamic reaction cell inductively coupled plasma mass spectrometry (DRC-ICP-MS). Journal of Analytical Atomic Spectrometry, 24, 502–507.CrossRefGoogle Scholar
  6. An, F.-Q., Wu, R.-Y., Li, M., Hu, T.-P., Gao, J.-F., & Yuan, Z.-G. (2017). Adsorption of heavy metal ions by iminodiacetic acid functionalized D301 resin: kinetics, isotherms and thermodynamics. Reactive and Functional Polymers, 118, 42–50.CrossRefGoogle Scholar
  7. Bağ, H., Türker, A. R., Lale, M., & Tunçeli, A. (2000). Separation and speciation of Cr (III) and Cr (VI) with Saccharomyces cerevisiae immobilized on sepiolite and determination of both species in water by FAAS. Talanta, 51, 895–902.CrossRefGoogle Scholar
  8. Çelik, B., Akkaya, E., Bakirdere, S., & Aydin, F. (2018). Determination of indium using vortex assisted solid phase microextraction based on oleic acid coated magnetic nanoparticles combined with slotted quartz tube-flame atomic absorption spectrometry. Microchemical Journal, 141, 7–11.CrossRefGoogle Scholar
  9. Chen, D., Huang, C., He, M., & Hu, B. (2009). Separation and preconcentration of inorganic arsenic species in natural water samples with 3-(2-aminoethylamino) propyltrimethoxysilane modified ordered mesoporous silica micro-column and their determination by inductively coupled plasma optical emission spectrometry. Journal of Hazardous Materials, 164, 1146–1151.CrossRefGoogle Scholar
  10. Chen, J. P., & Wang, L. (2004). Characterization of metal adsorption kinetic properties in batch and fixed-bed reactors. Chemosphere, 54, 397–404.CrossRefGoogle Scholar
  11. Covelo, E. F., Andrade, M. L., & Vega, F. (2004). Heavy metal adsorption by humic umbrisols: selectivity sequences and competitive sorption kinetics. Journal of Colloid and Interface Science, 280, 1–8.CrossRefGoogle Scholar
  12. Ezebuiro, P., Gandhi, J., Zhang, C., Mathew, J., Ritter, M., & Humphrey, M. (2012). Optimal sample preservation and analysis of Cr (VI) in drinking water samples by high resolution ion chromatography followed by post column reaction and UV/Vis detection. Journal of Analytical Sciences, Methods and Instrumentation, 2, 74.CrossRefGoogle Scholar
  13. Filik, H., Doğutan, M., & Apak, R. (2003). Speciation analysis of chromium by separation on a 5-palmitoyl oxine-functionalized XAD-2 resin and spectrophotometric determination with diphenylcarbazide. Analytical and Bioanalytical Chemistry, 376, 928–933.CrossRefGoogle Scholar
  14. Gil, R., Cerutti, S., Gásquez, J., Olsina, R., & Martinez, L. (2006). Preconcentration and speciation of chromium in drinking water samples by coupling of on-line sorption on activated carbon to ETAAS determination. Talanta, 68, 1065–1070.CrossRefGoogle Scholar
  15. Hazer, B., & Steinbüchel, A. (2007). Increased diversification of polyhydroxyalkanoates by modification reactions for industrial and medical applications. Applied Microbiology and Biotechnology, 74, 1–12.CrossRefGoogle Scholar
  16. Hazer, D. B., Kılıçay, E., & Hazer, B. (2012). Poly (3-hydroxyalkanoate) s: diversification and biomedical applications: a state of the art review. Materials Science and Engineering: C, 32, 637–647.CrossRefGoogle Scholar
  17. He, Q., Chang, X., Zheng, H., Jiang, N., & Wang, X. (2008). Determination of chromium (III) and total chromium in natural waters using a surface ion-imprinted silica gel as selective adsorbent. International Journal of Environmental and Analytical Chemistry, 88, 373–384.CrossRefGoogle Scholar
  18. Hsieh, C.-Y., Tsai, M.-H., Ryan, D. K., & Pancorbo, O. C. (2004). Toxicity of the 13 priority pollutant metals to Vibrio fisheri in the Microtox® chronic toxicity test. Science of the Total Environment, 320, 37–50.CrossRefGoogle Scholar
  19. Huang, C., Hu, B., & Jiang, Z. (2007). Simultaneous speciation of inorganic arsenic and antimony in natural waters by dimercaptosuccinic acid modified mesoporous titanium dioxide micro-column on-line separation and inductively coupled plasma optical emission spectrometry determination. Spectrochimica Acta Part B: Atomic Spectroscopy, 62, 454–460.CrossRefGoogle Scholar
  20. Iqbal, M., Saeed, A., & Zafar, S. I. (2007). Hybrid biosorbent: an innovative matrix to enhance the biosorption of Cd (II) from aqueous solution. Journal of Hazardous Materials, 148, 47–55.CrossRefGoogle Scholar
  21. Jitmanee, K., Oshima, M., & Motomizu, S. (2005). Speciation of arsenic (III) and arsenic (V) by inductively coupled plasma-atomic emission spectrometry coupled with preconcentration system. Talanta, 66, 529–533.CrossRefGoogle Scholar
  22. Kaewkhomdee, N., Mounicou, S., Szpunar, J., Lobinski, R., & Shiowatana, J. (2010). Characterization of binding and bioaccessibility of Cr in Cr-enriched yeast by sequential extraction followed by two-dimensional liquid chromatography with mass spectrometric detection. Analytical and Bioanalytical Chemistry, 396, 1355–1364.CrossRefGoogle Scholar
  23. Khamis, M., Jumean, F., & Abdo, N. (2009). Speciation and removal of chromium from aqueous solution by white, yellow and red UAE sand. Journal of Hazardous Materials, 169, 948–952.CrossRefGoogle Scholar
  24. Knöfel, C., Martin, C., Hornebecq, V., & Llewellyn, P. L. (2009). Study of carbon dioxide adsorption on mesoporous aminopropylsilane-functionalized silica and titania combining microcalorimetry and in situ infrared spectroscopy. The Journal of Physical Chemistry C, 113, 21726–21734.CrossRefGoogle Scholar
  25. Ksiazek, T. G., Erdman, D., Goldsmith, C. S., Zaki, S. R., Peret, T., Emery, S., Tong, S., Urbani, C., Comer, J. A., & Lim, W. (2003). A novel coronavirus associated with severe acute respiratory syndrome. New England Journal of Medicine, 348, 1953–1966.CrossRefGoogle Scholar
  26. Kuo, C.-Y., Jiang, S.-J., & Sahayam, A. (2007). Speciation of chromium and vanadium in environmental samples using HPLC-DRC-ICP-MS. Journal of Analytical Atomic Spectrometry, 22, 636–641.CrossRefGoogle Scholar
  27. Lenoble, V., Deluchat, V., Serpaud, B., & Bollinger, J.-C. (2003). Arsenite oxidation and arsenate determination by the molybdene blue method. Talanta, 61, 267–276.CrossRefGoogle Scholar
  28. Li, X. G., Zhang, J. L., & Huang, M. R. (2012). Interfacial synthesis and functionality of self-stabilized polydiaminonaphthalene nanoparticles. Chemistry–A European Journal, 18, 9877–9885.CrossRefGoogle Scholar
  29. Liang, P., & Liu, R. (2007). Speciation analysis of inorganic arsenic in water samples by immobilized nanometer titanium dioxide separation and graphite furnace atomic absorption spectrometric determination. Analytica Chimica Acta, 602, 32–36.CrossRefGoogle Scholar
  30. Liang, P., Shi, T., Lu, H., Jiang, Z., & Hu, B. (2003). Speciation of Cr (III) and Cr (VI) by nanometer titanium dioxide micro-column and inductively coupled plasma atomic emission spectrometry. Spectrochimica Acta Part B: Atomic Spectroscopy, 58, 1709–1714.CrossRefGoogle Scholar
  31. Lin, Y.-A., Jiang, S.-J., Sahayam, A., & Huang, Y.-L. (2016). Speciation of chromium in edible animal oils after microwave extraction and liquid chromatography inductively coupled plasma mass spectrometry. Microchemical Journal, 128, 274–278.CrossRefGoogle Scholar
  32. Ling, P., Liu, F., Li, L., Jing, X., Yin, B., Chen, K., & Li, A. (2010). Adsorption of divalent heavy metal ions onto IDA-chelating resins: simulation of physicochemical structures and elucidation of interaction mechanisms. Talanta, 81, 424–432.CrossRefGoogle Scholar
  33. Manassra, A., Khamis, M., Ihmied, T., & Eldakiky, M. (2010). Removal of chromium by continuous flow using wool packed columns. Electronic Journal of Environmental, Agricultural and Food Chemistry, 9, 651–663.Google Scholar
  34. Marques, M., Salvador, A., Morales-Rubio, A., & De la Guardia, M. (2000). Chromium speciation in liquid matrices: a survey of the literature. Fresenius’ Journal of Analytical Chemistry, 367, 601–613.CrossRefGoogle Scholar
  35. Organization W. H. 2007, Cancer control: knowledge into action: WHO guide for effective programmes, World Health Organization.Google Scholar
  36. Parikh, N. H., & Mashru, R. C. (2010). Estimation of trace amounts of chromium (III) in various multivitamin pharmaceutical formulations. International Journal of Pharmacy and Biological Sciences, 1, 388–394.Google Scholar
  37. Petrucci, F., & Senofonte, O. (2015). Determination of Cr (VI) in cosmetic products using ion chromatography with dynamic reaction cell-inductively coupled plasma-mass spectrometry (DRC-ICP-MS). Analytical Methods, 7, 5269–5274.CrossRefGoogle Scholar
  38. Qurie, M., Khamis, M., Manassra, A., Ayyad, I., Nir, S., Scrano, L., Bufo, S. A., & Karaman, R. (2013). Removal of Cr (VI) from aqueous environments using micelle-clay adsorption. The Scientific World Journal, 2013.Google Scholar
  39. Roig-Navarro, A., Martinez-Bravo, Y., Lopez, F., & Hernandez, F. (2001). Simultaneous determination of arsenic species and chromium (VI) by high-performance liquid chromatography–inductively coupled plasma-mass spectrometry. Journal of Chromatography A, 912, 319–327.CrossRefGoogle Scholar
  40. Ščančar, J., & Milačič, R. (2014). A critical overview of Cr speciation analysis based on high performance liquid chromatography and spectrometric techniques. Journal of Analytical Atomic Spectrometry, 29, 427–443.CrossRefGoogle Scholar
  41. Scialdone, O., D’Angelo, A., & Galia, A. (2016). Special applications of reverse electrodialysis. In Sustainable energy from salinity gradients (pp. 257–280). Elsevier.Google Scholar
  42. Sekar, M., Sakthi, V., & Rengaraj, S. (2004). Kinetics and equilibrium adsorption study of lead (II) onto activated carbon prepared from coconut shell. Journal of Colloid and Interface Science, 279, 307–313.CrossRefGoogle Scholar
  43. Sel, S., Erulaş, F. A., Turak, F., & Bakırdere, S. (2018). Simultaneous determination of chromium species in water and plant samples at trace levels by ion chromatography–inductively coupled plasma-mass spectrometry. Analytical Letters, 1–11.  https://doi.org/10.1080/00032719.2018.1494738.
  44. Sprynskyy, M., Buszewski, B., Terzyk, A. P., & Namieśnik, J. (2006). Study of the selection mechanism of heavy metal (Pb2+, Cu2+, Ni2+, and Cd2+) adsorption on clinoptilolite. Journal of Colloid and Interface Science, 304, 21–28.CrossRefGoogle Scholar
  45. Tuzen, M., Sahiner, S., & Hazer, B. (2016). Solid phase extraction of lead, cadmium and zinc on biodegradable polyhydroxybutyrate diethanol amine (PHB-DEA) polymer and their determination in water and food samples. Food Chemistry, 210, 115–120.CrossRefGoogle Scholar
  46. Tuzen, M., & Soylak, M. (2006). Chromium speciation in environmental samples by solid phase extraction on Chromosorb 108. Journal of Hazardous Materials, 129, 266–273.CrossRefGoogle Scholar
  47. Tuzen, M., Uluozlu, O. D., & Soylak, M. (2007). Cr (VI) and Cr (III) speciation on Bacillus sphaericus loaded Diaion SP-850 resin. Journal of Hazardous Materials, 144, 549–555.CrossRefGoogle Scholar
  48. Tzvetkova, P., Vassileva, P., & Nickolov, R. (2010). Modified silica gel with 5-amino-1, 3, 4-thiadiazole-2-thiol for heavy metal ions removal. Journal of Porous Materials, 17, 459–463.CrossRefGoogle Scholar
  49. Vinodhini, V., & Das, N. (2009). Mechanism of Cr (VI) biosorption by neem sawdust. American-Eurasian Journal of Scientific Research, 4, 324–329.Google Scholar
  50. Xiong, C., He, M., & Hu, B. (2008). On-line separation and preconcentration of inorganic arsenic and selenium species in natural water samples with CTAB-modified alkyl silica microcolumn and determination by inductively coupled plasma-optical emission spectrometry. Talanta, 76, 772–779.CrossRefGoogle Scholar
  51. Yildiz, U., Hazer, B., & Tauer, K. (2012). Tailoring polymer architectures with macromonomer azoinitiators. Polymer Chemistry, 3, 1107–1118.CrossRefGoogle Scholar
  52. Yu, C., Cai, Q., Guo, Z.-X., Yang, Z., & Khoo, S. B. (2003). Inductively coupled plasma mass spectrometry study of the retention behavior of arsenic species on various solid phase extraction cartridges and its application in arsenic speciation. Spectrochimica Acta Part B: Atomic Spectroscopy, 58, 1335–1349.CrossRefGoogle Scholar
  53. Zghida, H., Baouab, M. H. V., & Gauthier, R. (2003). Sorption of chromium oxy-anions onto cationized ligno-cellulosic material. Journal of Applied Polymer Science, 87, 1660–1665.CrossRefGoogle Scholar
  54. Zhang, W., Yu, D., Ji, X., & Huang, H. (2012). Efficient dehydration of bio-based 2, 3-butanediol to butanone over boric acid modified HZSM-5 zeolites. Green Chemistry, 14, 3441–3450.CrossRefGoogle Scholar
  55. Zhuo, R., Feng, H., Liang, Q., Liu, J., Chen, J., Yan, D., Feng, J., Li, H., Cheng, S., & Geng, B. (2008). Morphology-controlled synthesis, growth mechanism, optical and microwave absorption properties of ZnO nanocombs. Journal of Physics D: Applied Physics, 41, 185405.CrossRefGoogle Scholar

Copyright information

© Springer Nature Switzerland AG 2019

Authors and Affiliations

  1. 1.Faculty of Science and Arts, Chemistry DepartmentTokat Gaziosmanpaşa UniversityTokatTurkey
  2. 2.The Benazir Bhutto Shaheed University of Technology and Skill DevelopmentKhairpur MirsPakistan
  3. 3.Research Institute, Center for Environment and WaterKing Fahd University of Petroleum and MineralsDhahranSaudi Arabia
  4. 4.Department of Chemistry, Department of Metallurgical and Materials Engineering; Department of Nano Technology EngineeringBulent Ecevit UniversityZonguldakTurkey
  5. 5.Department of Aircraft Airframe Engine MaintenanceKapadokya UniversityUrgupTurkey
  6. 6.National Centre of Excellence in Analytical ChemistryUniversity of SindhJamshoroPakistan

Personalised recommendations