Advertisement

Chemophysical Evaluation of Green Sorption Media for Copper Removal in Stormwater Runoff for Improving Ecosystem and Human Health

  • Andrea Valencia
  • Jamie Kilner
  • Ni-Bin ChangEmail author
  • Martin P. Wanielista
Article
  • 11 Downloads

Abstract

Green sorption media, which includes the utilization of renewable and recycled materials, can be used as a means for nutrient and copper removal in various low-impact development facilities. In this study, a green sorption media mixture consisting of recycled tire chip, expanded clay, and coconut coir was physiochemically evaluated for copper removal potential in stormwater runoff to deepen the understanding of its application potential. Isotherm, reaction kinetics, and life expectancy tests were conducted using both the media mixture and the individual components of the green sorption media. In addition, the media mixture was analyzed to determine its life expectancy. Isotherm test results revealed that the media mixture follows the Freundlich model and that the coconut coir had the highest affinity for copper. Distinct dynamic adsorption models were explored to determine the most suitable model for implementation based on a column test data set. Five dynamic adsorption models, including the Thomas, Clark, Bohart-Adams, Wolborska, and modified dose-response models, were investigated and the media mixture data collected in the column test were fitted into these five models, leading to the selection of the best model with the highest correlation. The modified dose-response model outperformed others in terms of the overall media mixture and the coconut coir. Life expectancy estimation showed that the media mixture has a life span of 2.13 years with the chosen influent conditions and can be applicable for improving the performance of water quality management in stormwater detention and retention ponds, bioswale, and other stormwater best management practices.

Keywords

Green sorption media Stormwater management Copper removal Isotherm Adsorption Dynamic modeling Reaction kinetics Life expectancy 

Notes

Acknowledgements

The authors appreciate the funding and technical advice provided by the Florida Department of Transportation (Grant No. BDV24 TWO 977-14). The opinions, findings, and conclusions expressed in this publication are those of the author(s) and not necessarily those of the Florida Department of Transportation or the US Department of Transportation.

References

  1. Araneda, C., Basualto, C., Sapag, J., Tapia, C., Cotorás, D., & Valenzuela, F. (2011). Uptake of copper (II) ions from acidic aqueous solutions using a continuous column packed with microcapsules containing a β-hydroxyoximic compound. Chemical Engineering Research and Design, 89(12), 2761–2769.CrossRefGoogle Scholar
  2. ATSDR, 2015. Toxic substances portal-copper.Google Scholar
  3. Azizian, S., Eris, S., & Wilson, L. D. (2018). Re-evaluation of the century-old Langmuir isotherm for modeling adsorption phenomena in solution. Chemical Physics, 513, 99–104.CrossRefGoogle Scholar
  4. Barros, M. A. S. D., Arroyo, P. A., & Silva, E. A. (2013). General aspects of aqueous sorption process in fixed beds. In D. H. Nakajima (Ed.), Mass transfer—advances in sustainable energy and environment oriented numerical modeling. London: InTech.Google Scholar
  5. Bielmyer, G. K., Arnold, W. R., Tomasso, J. R., Isely, J. J., & Klaine, S. J. (2012). Effects of roof and rainwater characteristics on copper concentrations in roof runoff. Environmental Monitoring and Assessment, 184(5), 2797–2804.CrossRefGoogle Scholar
  6. Biswas, S., Mishra, U., 2015. Continuous Fixed-Bed Column Study and Adsorption Modeling: Removal of Lead Ion from Aqueous Solution by Charcoal Originated from Chemical Carbonization of Rubber Wood Sawdust. Journal of Chemistry, 2015, 1-9.Google Scholar
  7. Bohart, G. S., & Adams, E. Q. (1920). Some aspects of the behavior of charcoal with respect to chlorine. Journal of the Franklin Institute-Engineering and Applied Mathematics, 42, 523–529.Google Scholar
  8. Button, K. S. (1977). Copper dispersal in a water-supply reservoir. Water Resources, 11, 539–544.Google Scholar
  9. Chang, N.-B., Wanielista, M., & Darranpob, A. (2010). Filter media for nutrient removal in natural systems and built environments: II—design and application challenges. Environmental Engineering Science, 27, 707–720.CrossRefGoogle Scholar
  10. Chang, N.-B., Houmann, C., Lin, K.-S., & Wanielista, M. (2016a). Fate and transport with material response characterization of green sorption media for copper removal via adsorption process. Chemosphere, 144, 1280–1289.CrossRefGoogle Scholar
  11. Chang, N.-B., Houmann, C., & Wanielista, M. (2016b). Scaling up adsorption media reactors for copper removal with the aid of dimensionless numbers. Chemosphere, 144, 1098–1105.CrossRefGoogle Scholar
  12. Chen, H., Zhao, Y., & Wang, A. (2007). Removal of Cu(II) from aqueous solution by adsorption onto acid-activated palygorskite. Journal of Hazardous Materials, 149(2), 346–354.CrossRefGoogle Scholar
  13. Chou, Y.-l. (1989). Statistical analysis for business and economics. New York: Elsevier Science Publishing.Google Scholar
  14. Chowdhury, Z. Z., Abd Hamid, S. B., & Mohd Zain, S. (2015). Biosorption of 2,4-dichlorophenol from aqueous solutions by immobilized Phanerochaete chrysosporium biomass in a fixed-bed column. BioResources, 1, 732–749.Google Scholar
  15. Chu, K. H. (2010). Fixed bed sorption: setting the record straight on the Bohart–Adams and Thomas models. Journal of Hazardous Materials, 177, 1006–1012.CrossRefGoogle Scholar
  16. Clark, S., Pitt, R., & Brown, D. (2001). Effect of anaerbiosis on filter media pollutant retention, Engineering Foundation and American Society of Civil Engineers conference on information and monitoring needs for evaluating the mitigation effects of BMPs. Colorado: Snowmass.Google Scholar
  17. Crittenden, J.C., Howe, K.J., Hand, D.W., Tchobanoglous, G., Trussell, R.R., 2012. Principles of water treatment, Third ed. Wiley.Google Scholar
  18. Davis, A. P., Shokouhian, M., & Ni, S. (2001). Loading estimates of lead, copper, cadmium, and zinc in urban runoff from specific sources. Chemosphere, 44, 997–1009.CrossRefGoogle Scholar
  19. DeBusk, T. A., Langston, M. A., Schwegler, B. R., & Davidson, S. (1997). An evaluation of filter media for treating stormwater runoff, Proceedings of the fifth biennial storm water research conference. West Palm Beach, Florida: South Florida Water Management District at the Four Points Sheraton Hotel.Google Scholar
  20. Djeribi, R., & Hamdaoui, O. (2008). Sorption of copper(II) from aqueous solutions by cedar sawdust and crushed brick. Desalination, 225, 95–112.CrossRefGoogle Scholar
  21. Febrianto, J., Kosasih, A. N., Sunarso, J., Ju, Y.-H., Indraswati, N., & Ismadji, S. (2009). Equilibrium and kinetic studies in adsorption of heavy metals sing biosorbent: a summary of recent studies. Journal of Hazardous Materials, 162, 616–645.CrossRefGoogle Scholar
  22. Gaber, N., Foley, G., Pascual, P., Stiber, N., Sunderland, E., Cope, B., Nold, A., Saleem, Z., 2009. Guidance on the Development, Evaluation, and Application of Environmental Models. EPA, Office of Science Advisor, pp. 1-99.Google Scholar
  23. Ghribi, A., & Chlendi, M. (2011). Modeling of fixed bed adsorption: application to the adsorption of an organic dye. Asian Journal of Textile, 1(4), 161–171.CrossRefGoogle Scholar
  24. Guirado, G., & Ayllón, J. A. (2011). A simple adsorption experiment. Journal of Chemical Education, 88(5), 624–628.CrossRefGoogle Scholar
  25. Hamdaoui, O. (2006). Dynamic sorption of methylene blue by cedar sawdust and crushed brick in fixed bed columns. Journal of Hazardous Materials, 138(2), 293–303.CrossRefGoogle Scholar
  26. Hasan, N. M. S., Sobuz, H. R., Sayed, M. S., & Islam, M. S. (2012). The use of coconut fibre in the production of structural lightweight concrete. Journal of Applied Sciences, 12(9), 831–839.CrossRefGoogle Scholar
  27. Ho, Y. S. (2006). Second-order kinetic model for the sorption of cadmium onto tree fern: a comparison of linear and non-linear methods. Water Research, 40(1), 119–125.CrossRefGoogle Scholar
  28. Hossain, F., Chang, N.-B., & Wanielista, M. (2010). Modeling kinetics and isotherms of functionalized filter media for nutrient removal from stormwater dry ponds. Environmental Progress & Sustainable Energy, 29(3), 319–333.CrossRefGoogle Scholar
  29. Huguenot, D., Bois, P., Jezequel, K., Cornu, J.-Y., & Lebeau, T. (2010). Selection of low cost materials for the sorption of copper and herbicides as single or mixed compounds in increasing complexity matrices. Journal of Hazardous Materials, 182, 83–94.CrossRefGoogle Scholar
  30. Inyinbor, A. A., Adekola, F. A., & Olatunji, G. A. (2016). Kinetics, isotherms and thermodynamic modeling of liquid phase adsorption of rhodamine B dye onto Raphia hookerie fruit epicarp. Water Resources and Industry, 15, 14–27.CrossRefGoogle Scholar
  31. IPCS (1998). Environmental Health Criteria 200 Copper. Geneva: World Health Organization.Google Scholar
  32. Jeppu, G. P., & Clement, T. P. (2012). A modified Langmuir-Freundlich isotherm model for simulating pH-dependent adsorption effects. Journal of Contaminant Hydrology, 129-130, 46–53.CrossRefGoogle Scholar
  33. Jones, J., Chang, N.-B., & Wanielista, M. P. (2015). Reliability analysis of nutrient removal from stormwater runoff with green sorption media under varying influent conditions. Science of the Total Environment, 502, 434–447.CrossRefGoogle Scholar
  34. Khambhaty, Y., Mody, K., Basha, S., & Jha, B. (2009). Kinetics, equilibrium and thermodynamic studies on biosorption of hexavalent chromium by dead fungal biomass of marine Aspergillus niger. Chemical Engineering Journal, 145(3), 489–495.CrossRefGoogle Scholar
  35. Lau, L. C., MohamadNor, N., Lee, K. T., & Mohamed, A. R. (2016). Adsorption isotherm, kinetic, thermodynamic and breakthrough curve models of H2S removal using CeO2/NaOH/PSAC. Petrochemical Science & Engineering, 1(2), 1–10.Google Scholar
  36. Li, Y., Lu, X., Yang, R., Tonga, W., Xu, L., de Bondelon, L., Wang, H., Zhu, J. & Ge, Q.: 2016, 'Adsorption of berberine hydrochloride onto mesoporous carbons with tunable pore size'. Royal Society of Chemistry, 6, 28219-28228.Google Scholar
  37. Lichtfouse, E., Schwarzbauer, J., & Robert, D. (2013). Green materials for energy, products and depollution. Berlin: Springer.CrossRefGoogle Scholar
  38. Lou, S. (2017). Applied adsorption kinetics model for removal of hazards from aqueous solution: more informational parameters for industrial design. Journal of Environmental Science and Public Health, 1(4), 228–239.CrossRefGoogle Scholar
  39. McKeon, T.J., Segna, J.J., 1987. Selection Criteria for Mathematical Models Used in Exposure Assessments: Surface Water Models. USEPA, OSTI, pp. 1-184.Google Scholar
  40. Nouri, H., & Ouederni, A. (2013). Modeling of the dynamics adsorption of phenol from an aqueous solution on activated carbon produced from olive stones. International Journal of Chemical Engineering and Applications, 4, 254–261.CrossRefGoogle Scholar
  41. Parbhane, D. M., & Shinde, S. B. (2014). Evaluation of compressive strength and density of coir concrete. International Journal of Advanced Research in Engineering and Technology, 5(2), 32–36.Google Scholar
  42. Pehlivan, E., Cetin, S., Yanik, B.H., 2006. Equilibrium studies for the sorption of zinc and copper from aqueous solutions using sugar beet pulp and fly ash. Journal of Hazardous Materials, 135(1-3), 193-199.Google Scholar
  43. Peterson, C. (1985). High Acidity Is Found in Florida Lakes. The Washington Post.Google Scholar
  44. Prestes, E. C., dos Anjos, V. E., Sodré, F. F., & Grassi, M. T. (2006). Copper, lead and cadmium loads and behavior in urban stormwater runoff in Curitiba, Brazil. Journal of the Brazilian Chemical Society, 17, 53–60.CrossRefGoogle Scholar
  45. Ray, A. B., Selvakumar, A., & Tafuri, A. N. (2006). Removal of selected pollutants from aqueous media by hardwood mulch. Journal of Hazardous Materials B, 136, 213–218.CrossRefGoogle Scholar
  46. Rezaee, A., Rangkooy, H.-A., Khavanin, A., Jonidi-Jafari, A., Soltani, R. D. C., & Nili-Ahmadabadi, A. (2011). Adsorption properties and breakthrough model of formaldehyde on bone char. International Journal of Environmental Science and Development, 2(6), 423–427.CrossRefGoogle Scholar
  47. Rudzinski, W., & Plazinski, W. (2007). Studies of the kinetics of solute adsorption at solid/solution interfaces: on the possibility of distinguishing between the diffusional and the surface reaction kinetic models by studying the pseudo-first-order kinetics. Journal of Physical Chemistry, 111, 15100–15110.CrossRefGoogle Scholar
  48. Sawyer, C. N., McCarty, P. I., & Parkin, G. F. (2003). Water chemistry for environmental engineering and science (fifth ed.). New York: McGraw Hill.Google Scholar
  49. Sohn, S., & Kim, D. (2005). Modification of Langmuir isotherm in solution systems—definition and utilization of concentration dependent factor. Chemosphere, 58(1), 115–123.CrossRefGoogle Scholar
  50. Tan, K. L., & Hameed, B. H. (2017). Insight into the adsorption kinetics models for the removal of contaminants from aqueous solutions. Journal of the Taiwan Institute of Chemical Engineers, 74, 25–48.CrossRefGoogle Scholar
  51. Trgo, M., Medvidovic, N. V., & Peric, J. (2011). Application of mathematical empirical models to dynamic removal of lead on natural zeolite cliniptilolite in a fixed bed column. Indian Journal of Chemical Technology, 18, 123–131.Google Scholar
  52. Tseng, R.-L., Wu, F.-C., Juang, R.-S., 2010. Characteristics and applications of the Lagergren's first-order equation for adsorption kinetics. Journal of Taiwan Institute of Chemical Engineers, 41(6), 661-669.Google Scholar
  53. Vijayaraghavan, K., & Prabu, D. (2006). Potential of Sargassum wightii biomass for copper(II) removal from aqueous solutions: application of different mathematical models to batch and continuous biosorption data. Journal of Hazardous Materials, 137(1), 558–564.CrossRefGoogle Scholar
  54. Wang, Y.-H., Lin, S.-H., & Juang, R.-S. (2003). Removal of heavy metal ions from aqueous solutions using various low-cost adsorbents. Journal of Hazardous Materials, 102(2–3), 291-302.Google Scholar
  55. Wu, J., & Yu, H.-Q. (2008). Biosorption of 2,4-dichlorophenol from aqueous solutions by immobilized Phanerochaete chrysosporium biomass in a fixed-bed column. Chemical Engineering Journal, 138, 128–135.CrossRefGoogle Scholar
  56. Wu, F.-C., Tseng, R.-L., & Juang, R.-S. (2009). Characteristics of Elovich equation used for the analysis of adsorption kinetics in dye-chitosan systems. Chemical Engineering Journal, 150(2–3), 366–373.CrossRefGoogle Scholar
  57. Xu, Z., Cai, J.-g., & Pan, B.-c. (2013). Mathematically modeling fixed-bed adsorption in aqueous systems. Journal of Zhejiang University Science A, 14(3), 155–176.CrossRefGoogle Scholar
  58. Xue, R., Xu, J., Gu, L., Pan, L., & He, Q. (2018). Study of phosphorus removal by using sponge iron adsorption. Water, Air, & Soil Pollution, 229, 1–12.CrossRefGoogle Scholar
  59. Yan, G., Viraraghavan, T., & Chen, M. (2001). A new model for heavy metal removal in a biosorption column. Adsorption Science & Technology, 19(1), 25–43.CrossRefGoogle Scholar
  60. Yu, B., Zhang, Y., Shukla, A., Shyam, S., & Dorris, K. (2001). The removal of heavy metal from aqueous solutions by sawdust adsorption: removal of lead and its comparison of its adsorption with copper. Journal of Hazardous Materials, 84, 83–94.CrossRefGoogle Scholar
  61. Yunnen, C., Ye, W., Chen, L., Lin, G., Jinxia, N., & Rushan, R. (2017). Continuous fixed-bed column study and adsorption modeling: removal of arsenate and arsenite in aqueous solution by organic modified spent grains. Polish Journal of Environmental Studies, 26(4), 1847–1854.CrossRefGoogle Scholar

Copyright information

© This is a U.S. Government work and not under copyright protection in the US; foreign copyright protection may apply 2018

Authors and Affiliations

  1. 1.Department of Civil, Environmental, and Construction EngineeringUniversity of Central FloridaOrlandoUSA

Personalised recommendations