Effective Removal of Toxic Heavy Metal Ions from Aqueous Solution by CaCO3 Microparticles

  • Rui Zhang
  • Joseph J. Richardson
  • Anthony F. Masters
  • Gyeongwon Yun
  • Kang Liang
  • Thomas Maschmeyer
Article

Abstract

Heavy metals are a common contaminant in water supplies and pose a variety of serious health risks to nearby human populations. A promising approach to heavy metal decontamination is the sequestration of heavy metal ions in porous materials; however, current technologies involve materials which can be difficult to synthesize, are high-cost, or are themselves potentially toxic. Herein, we demonstrate that rapidly synthesized calcium carbonate (CaCO3) microparticles can effectively remove high quantities of Pb2+, Cd2+, and Cu2+ ions (1869, 1320, and 1293 mg per gram of CaCO3 microparticles, respectively) from aqueous media. The CaCO3 microparticles were characterized with powder X-ray diffraction (XRD), scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HRTEM), and Brunauer–Emmett–Teller (BET) N2 sorption–desorption. It was found that the Ca2+ ions of the microparticles were replaced by the heavy metal ions, leading to partially recrystallized nanoparticles of new compositional phases such as cerussite (PbCO3). The adsorption, surface dissolution/re-precipitation, and nucleation/crystal growth mechanisms were determined by investigating the Ca2+ released, along with the changes to particle morphology and crystal structure. Importantly, this study demonstrates that the porous CaCO3 microparticles performed well in a system with multiple heavy metal ion species: 100% of Cu2+, 97.5% of Pb2+, and 37.0% Cd2+ were removed from an aqueous solution of all cations with initial individual metal concentrations of 50 mg/L and 1.5 g/L of CaCO3 microparticles. At this concentration, the CaCO3 microparticles significantly outperformed activated carbon. These results help to establish CaCO3 microparticles as a promising low-cost and scalable technology for removing heavy metal ions from contaminated water.

Graphical abstract

Keywords

Calcium carbonate Porous microparticles Heavy metal adsorption Adsorption mechanisms 

Notes

Acknowledgements

R. Zhang thanks the University of Sydney for a scholarship for her PhD study and the scientific and technical assistance, of the Australian Centre for Microscopy and Microanalysis (ACMM) Research Facility at the University of Sydney. Dr. Alexander K.Y. Yuen is acknowledged for his assistance with N2 sorption–desorption isotherm analysis. Dr. Shane Wilkinson is acknowledged for his support of ICP-OES analysis. Dr. Kang Liang acknowledges the support from the Scientia Fellowship program at UNSW.

Supplementary material

11270_2018_3787_MOESM1_ESM.docx (1.2 mb)
ESM 1 (DOCX 1181 kb)

References

  1. Al-Rashdi, B., Johnson, D., & Hilal, N. (2013). Removal of heavy metal ions by nanofiltration. Desalination, 315, 2–17.CrossRefGoogle Scholar
  2. Amuda, O., Giwa, A., & Bello, I. (2007). Removal of heavy metal from industrial wastewater using modified activated coconut shell carbon. Biochemical Engineering Journal, 36, 174–181.CrossRefGoogle Scholar
  3. Annadurai, G., Juang, R., & Lee, D. (2003). Adsorption of heavy metals from water using banana and orange peels. Water Science and Technology, 47, 185–190.Google Scholar
  4. Arshadi, M., Amiri, M., & Mousavi, S. (2014). Kinetic, equilibrium and thermodynamic investigations of Ni (II), Cd (II), Cu (II) and Co (II) adsorption on barley straw ash. Water Resources and Industry, 6, 1–17.CrossRefGoogle Scholar
  5. Aziz, H. A., Adlan, M. N., & Ariffin, K. S. (2008). Heavy metals (Cd, Pb, Zn, Ni, Cu and Cr (III)) removal from water in Malaysia: post treatment by high quality limestone. Bioresource Technology, 99, 1578–1583.CrossRefGoogle Scholar
  6. Blöcher, C., Dorda, J., Mavrov, V., Chmiel, H., Lazaridis, N., & Matis, K. (2003). Hybrid flotation-membrane filtration process for the removal of heavy metal ions from wastewater. Water Research, 37, 4018–4026.CrossRefGoogle Scholar
  7. Boparai, H. K., Joseph, M., & O’Carroll, D. M. (2011). Kinetics and thermodynamics of cadmium ion removal by adsorption onto nano zerovalent iron particles. Journal of Hazardous Materials, 186, 458–465.CrossRefGoogle Scholar
  8. Bushong, E. J., & Yoder, C. H. (2009). The synthesis and characterization of rouaite, a copper hydroxy nitrate. An integrated first-year laboratory project. Journal of Chemical Education, 86, 80.CrossRefGoogle Scholar
  9. Cai, G. B., Zhao, G. X., Wang, X. K., & Yu, S. H. (2010). Synthesis of polyacrylic acid stabilized amorphous calcium carbonate nanoparticles and their application for removal of toxic heavy metal ions in water. The Journal of Physical Chemistry C, 114, 12948–12954.CrossRefGoogle Scholar
  10. Celis, R., Hermosin, M. C., & Cornejo, J. (2000). Heavy metal adsorption by functionalized clays. Environmental Science & Technology, 34, 4593–4599.CrossRefGoogle Scholar
  11. Charerntanyarak, L. (1999). Heavy metals removal by chemical coagulation and precipitation. Water Science and Technology, 39, 135–138.Google Scholar
  12. Erdem, E., Karapinar, N., & Donat, R. (2004). The removal of heavy metal cations by natural zeolites. Journal of Colloid and Interface Science, 280, 309–314.CrossRefGoogle Scholar
  13. Fu, F., & Wang, Q. (2011). Removal of heavy metal ions from wastewaters: a review. Journal of Environmental Management, 92, 407–418.CrossRefGoogle Scholar
  14. Gamsjäger, H., Fluch, A., & Swinehart, J. H. (1984). The effect of potential aqueous pollutants on the solubility of Pb2+ in cerussite-calcite phase. Monatshefte für Chemie/Chemical Monthly, 115, 251–259.CrossRefGoogle Scholar
  15. Garcıa-Sánchez, A., & Alvarez-Ayuso, E. (2002). Sorption of Zn, Cd and Cr on calcite. Application to purification of industrial wastewaters. Minerals Engineering, 15, 539–547.CrossRefGoogle Scholar
  16. Godelitsas, A., Astilleros, J. M., Hallam, K., Harissopoulos, S., & Putnis, A. (2003). Interaction of calcium carbonates with lead in aqueous solutions. Environmental Science & Technology, 37, 3351–3360.CrossRefGoogle Scholar
  17. Gupta, V. K., Agarwal, S., & Saleh, T. A. (2011). Synthesis and characterization of alumina-coated carbon nanotubes and their application for lead removal. Journal of Hazardous Materials, 185, 17–23.CrossRefGoogle Scholar
  18. Ho, Y. S., Wase, D. J., & Forster, C. (1996). Kinetic studies of competitive heavy metal adsorption by sphagnum moss peat. Environmental Technology, 17, 71–77.CrossRefGoogle Scholar
  19. Hong, K. S., Lee, H. M., Bae, J. S., Ha, M. G., Jin, J. S., Hong, T. E., Kim, J. P., & Jeong, E. D. (2011). Removal of heavy metal ions by using calcium carbonate extracted from starfish treated by protease and amylase. Journal of Analytical Science and Technology, 2, 75–82.CrossRefGoogle Scholar
  20. Hua, M., Zhang, S., Pan, B., Zhang, W., Lv, L., & Zhang, Q. (2012). Heavy metal removal from water/wastewater by nanosized metal oxides: a review. Journal of Hazardous Materials, 211, 317–331.CrossRefGoogle Scholar
  21. Jambor, J. L., Puziewicz, J., & Roberts, A. C. (1999). New mineral names. American Mineralogist, 84, 685–688.Google Scholar
  22. Kobya, M., Demirbas, E., Senturk, E., & Ince, M. (2005). Adsorption of heavy metal ions from aqueous solutions by activated carbon prepared from apricot stone. Bioresource Technology, 96, 1518–1521.CrossRefGoogle Scholar
  23. Lin, S. H., Lai, S. L., & Leu, H. G. (2000). Removal of heavy metals from aqueous solution by chelating resin in a multistage adsorption process. Journal of Hazardous Materials, 76, 139–153.CrossRefGoogle Scholar
  24. Ma, X., Li, L., Yang, L., Su, C., Wang, K., & Jiang, K. (2012a). Preparation of hybrid CaCO3-pepsin hemisphere with ordered hierarchical structure and the application for removal of heavy metal ions. Journal of Crystal Growth, 338, 272–279.CrossRefGoogle Scholar
  25. Ma, X., Li, L., Yang, L., Su, C., Wang, K., Yuan, S., & Zhou, J. (2012b). Adsorption of heavy metal ions using hierarchical CaCO3–maltose meso/macroporous hybrid materials: adsorption isotherms and kinetic studies. Journal of Hazardous Materials, 209, 467–477.CrossRefGoogle Scholar
  26. Matlock, M. M., Howerton, B. S., & Atwood, D. A. (2002). Chemical precipitation of heavy metals from acid mine drainage. Water Research, 36, 4757–4764.CrossRefGoogle Scholar
  27. Mohammadifard, H., & Amiri, M. C. (2017). Evaluating Cu (II) removal from aqueous solutions with response surface methodology by using novel synthesized CaCO3 nanoparticles prepared in a colloidal gas aphron system. Chemical Engineering Communications, 204, 476–484.CrossRefGoogle Scholar
  28. Okoye, A., Ejikeme, P., & Onukwuli, O. (2010). Lead removal from wastewater using fluted pumpkin seed shell activated carbon: adsorption modeling and kinetics. International Journal of Environmental Science & Technology, 7, 793–800.CrossRefGoogle Scholar
  29. Pickering, W. (1983). Extraction of copper, lead, zinc or cadmium ions sorbed on calcium carbonate. Water, Air, & Soil Pollution, 20, 299–309.CrossRefGoogle Scholar
  30. Reed, B. E., & Matsumoto, M. R. (1993). Modeling cadmium adsorption by activated carbon using the Langmuir and Freundlich isotherm expressions. Separation Science and Technology, 28, 2179–2195.CrossRefGoogle Scholar
  31. Ren, C., Ding, X., Li, W., Wu, H., & Yang, H. (2017). Highly efficient adsorption of heavy metals onto novel magnetic porous composites modified with amino groups. Journal of Chemical & Engineering Data, 62, 1865–1875.CrossRefGoogle Scholar
  32. Ricco, R., Konstas, K., Styles, M. J., Richardson, J. J., Babarao, R., Suzuki, K., Scopece, P., & Falcaro, P. (2015). Lead (II) uptake by aluminium based magnetic framework composites (MFCs) in water. Journal of Materials Chemistry A, 3, 19822–19831.CrossRefGoogle Scholar
  33. Richardson, J. J., Maina, J. W., Ejima, H., Hu, M., Guo, J., Choy, M. Y., Gunawan, S. T., Lybaert, L., Hagemeyer, C. E., & De Geest, B. G. (2015). Versatile loading of diverse cargo into functional polymer capsules. Advanced Science, 2, 1400007.CrossRefGoogle Scholar
  34. Saha, D., Barakat, S., Van Bramer, S. E., Nelson, K. A., Hensley, D. K., & Chen, J. (2016). Noncompetitive and competitive adsorption of heavy metals in sulfur-functionalized ordered mesoporous carbon. ACS Applied Materials & Interfaces, 8, 34132–34142.CrossRefGoogle Scholar
  35. Sdiri, A., & Higashi, T. (2013). Simultaneous removal of heavy metals from aqueous solution by natural limestones. Applied Water Science, 3, 29–39.CrossRefGoogle Scholar
  36. Sdiri, A., Higashi, T., Chaabouni, R., & Jamoussi, F. (2012a). Competitive removal of heavy metals from aqueous solutions by montmorillonitic and calcareous clays. Water, Air, & Soil Pollution, 223, 1191–1204.CrossRefGoogle Scholar
  37. Sdiri, A., Higashi, T., Jamoussi, F., & Bouaziz, S. (2012b). Effects of impurities on the removal of heavy metals by natural limestones in aqueous systems. Journal of Environmental Management, 93, 245–253.CrossRefGoogle Scholar
  38. Srivastava, V. C., Mall, I. D., & Mishra, I. M. (2006). Equilibrium modelling of single and binary adsorption of cadmium and nickel onto bagasse fly ash. Chemical Engineering Journal, 117, 79–91.CrossRefGoogle Scholar
  39. Stafiej, A., & Pyrzynska, K. (2007). Adsorption of heavy metal ions with carbon nanotubes. Separation and Purification Technology, 58, 49–52.CrossRefGoogle Scholar
  40. Tavakoli, O., Goodarzi, V., Saeb, M. R., Mahmoodi, N. M., & Borja, R. (2017). Competitive removal of heavy metal ions from squid oil under isothermal condition by CR11 chelate ion exchanger. Journal of Hazardous Materials, 334, 256–266.CrossRefGoogle Scholar
  41. Wang, X., Cai, W., Lin, Y., Wang, G., & Liang, C. (2010a). Mass production of micro/nanostructured porous ZnO plates and their strong structurally enhanced and selective adsorption performance for environmental remediation. Journal of Materials Chemistry, 20, 8582–8590.CrossRefGoogle Scholar
  42. Wang, Y., Moo, Y. X., Chen, C., Gunawan, P., & Xu, R. (2010b). Fast precipitation of uniform CaCO 3 nanospheres and their transformation to hollow hydroxyapatite nanospheres. Journal of Colloid and Interface Science, 352, 393–400.CrossRefGoogle Scholar
  43. Wang, Z., Feng, Y., Hao, X., Huang, W., & Feng, X. (2014). A novel potential-responsive ion exchange film system for heavy metal removal. Journal of Materials Chemistry A, 2, 10263–10272.CrossRefGoogle Scholar
  44. Yavuz, O., Guzel, R., Aydin, F., Tegin, I., & Ziyadanogullari, R. (2007). Removal of cadmium and lead from aqueous solution by calcite. Polish Iournal of Environmental Studies, 16, 467.Google Scholar
  45. Yoder, C., Bushong, E., Liu, X., Weidner, V., McWilliams, P., Martin, K., Lorgunpai, J., Haller, J., & Schaeffer, R. (2010). The synthesis and solubility of the copper hydroxyl nitrates: gerhardtite, rouaite and likasite. Mineralogical Magazine, 74, 433–440.CrossRefGoogle Scholar

Copyright information

© Springer International Publishing AG, part of Springer Nature 2018

Authors and Affiliations

  • Rui Zhang
    • 1
  • Joseph J. Richardson
    • 2
    • 3
  • Anthony F. Masters
    • 1
  • Gyeongwon Yun
    • 2
  • Kang Liang
    • 4
    • 5
  • Thomas Maschmeyer
    • 1
  1. 1.Laboratory of Advanced Catalysis for Sustainability, School of ChemistryThe University of SydneySydneyAustralia
  2. 2.Department of Chemical EngineeringThe University of MelbourneMelbourneAustralia
  3. 3.Manufacturing, CSIROClaytonAustralia
  4. 4.School of Chemical EngineeringThe University of New South WalesSydneyAustralia
  5. 5.Graduate School of Biomedical EngineeringThe University of New South WalesSydneyAustralia

Personalised recommendations