Advertisement

Tribology Letters

, 67:50 | Cite as

On the Assessment of Mechanical Degradation of Grease Using Entropy Generation Rate

  • K. P. Lijesh
  • M. M. KhonsariEmail author
Original Paper
  • 27 Downloads

Abstract

A methodology for continuous monitoring of grease degradation subjected to mechanical shearing is proposed. It is hypothesized that the mechanical degradation of grease is akin to the running-in process in a tribo-pair with both transient and steady-state regimes. To validate the hypothesis, a series of mechanical shearing tests are performed on three grades of grease: NLGI 00, NLGI 1, and NLGI 2.5 by employing a rheometer. From the results, a more effective method using the entropy generation rate is proposed for continuous monitoring of grease degradation. The proposed method is extended to estimate the time for a grease subjected to mechanical shearing to degrade to a lower grade. The efficacy of this method is demonstrated via long duration testing in a custom-built ball-bearing test apparatus.

Keywords

Entropy generation rate Transient regime Steady-state regime Grease degradation 

Notes

Acknowledgements

This research was conducted at LSU Center for Rotating Machinery and funded in part by NLGI (LSU #46895). The authors gratefully acknowledge this support.

References

  1. 1.
    Lugt, P.M.: Grease lubrication in rolling bearings. Wiley, New York (2013)Google Scholar
  2. 2.
    National Lubricating Grease Institute (NLGI): Lubricating grease guide, 2nd edn. NLGI, Kansas City (1987)Google Scholar
  3. 3.
    Lugt, P.M.: A review on grease lubrication in rolling bearings. Tribol. Trans. 52(4), 470–480 (2009)CrossRefGoogle Scholar
  4. 4.
    Gow, G.: Lubricating grease. In Chemistry and technology of lubricants, pp. 411–432. Springer, Dordrecht (2010)Google Scholar
  5. 5.
    Baumoel, J. Fluoro-ether grease acoustic couplant. U.S. Patent 4,929,368, (1990)Google Scholar
  6. 6.
    James, H. E., Walter H. M. Shaft support and lubricating arrangement. U.S. Patent 2,919,962, (1960)Google Scholar
  7. 7.
    Singh, T., Banerjee, S.K., Ravi, K.: Grease composition for lubrication of journal bearings used in sugar mill, pp. 23–26. Mumbai, Greasetech India (2010)Google Scholar
  8. 8.
    Cobb, L.D.: Grease lubrication of ball bearings. Lubr. Eng. 8, 120–124 (1952)Google Scholar
  9. 9.
    Kawamura, T., Minami, M., Hirata, M.: Grease life prediction for sealed ball bearings. Tribol. Trans. 44(2), 256–262 (2001)CrossRefGoogle Scholar
  10. 10.
    Lundberg, J.: Grease lubrication of roller bearings in railway wagons. Part 1: field tests and systematic evaluation to determine the optimal greases. Ind. Lubr. Tribol. 52(1), 36–43 (2000)CrossRefGoogle Scholar
  11. 11.
    Baker, A.E.: Grease bleeding—a factor in ball bearing performance. NLGI Spokesm. 22, 271–279 (1958)Google Scholar
  12. 12.
    Lundberg, J., Berg, S.: Grease lubrication of roller bearings in railway wagons. Part 2: laboratory tests and selection of proper test methods. Ind. Lubr. Tribol. 52(2), 76–85 (2000)CrossRefGoogle Scholar
  13. 13.
    Cann, P.M., Doner, J.P., Webster, M.N., Wikstrom, V.: Grease degradation in rolling element bearings. Tribol. Trans. 44(3), 399–404 (2001)CrossRefGoogle Scholar
  14. 14.
    Ito, H., Tomaru, M., Suzuki, T.: Physical and chemical aspects of grease deterioration in sealed ball bearings. Lubr. Eng. 44(10), 872–879 (1988)Google Scholar
  15. 15.
    Wilson, A.R.: The relative film thickness of grease and oil films in rolling bearings. Proc. Inst. Mech. Eng. 193, 185–192 (1979)CrossRefGoogle Scholar
  16. 16.
    Booser, E.R., Khonsari, M.M.: In: Chung, Y.W., Wang, Q.J. (eds.) Grease and grease life, encyclopedia of tribology, pp. 1555–1561. Springer Science, New York (2013)CrossRefGoogle Scholar
  17. 17.
    Khonsari, M.M., Booser, E.R., Miller, R.: How grease keep bearings rolling. Mach. Des. 82, 54–59 (2010)Google Scholar
  18. 18.
    Fukunaga, K.: Allowable surface durability in grease lubricated gears. Tribol. Trans. 31(4), 454–460 (1988)CrossRefGoogle Scholar
  19. 19.
    Krantz, T. L., Robert F. H. A: Study of spur gears lubricated with grease-observations from seven experiments. 58th Meeting of the Society for Machinery Failure Prevention Technology (MFPT) NASA, pp. 1–15 (2005)Google Scholar
  20. 20.
    Schultheiss, H., Stemplinger J. P., Thomas T., Stahl, K.: Influences on failure modes and load-carrying capacity of grease-lubricated gears. In International Conference on Gears, Munich, pp. 5–7 (2015)Google Scholar
  21. 21.
    Harris, C.G., Williams, J.H., Davies, A.: Condition monitoring of machine tools. Int. J. Prod. Res. 27(9), 1445–1464 (1989)CrossRefGoogle Scholar
  22. 22.
    Ming, Z.Y.H.Y.Z.: Development of slide-way sealing grease 7035 for sintering machine. Synth. Lubr. 1, 005 (2006)Google Scholar
  23. 23.
    Aranzabe, A., Estibaliz, A., Arrate, M., Raquel, F., Jesus, T., Jo, A., Raj, S.: Comparing different analytical techniques to monitor lubricating grease degradation. NLGI Spokesm-Including NLGI Annual Meeting-National Lubricating Grease Institute 70(6), 17–30 (2006)Google Scholar
  24. 24.
    Rezasoltani, A., Khonsari, M.: On monitoring physical and chemical degradation and life estimation models for lubricating greases. Lubricants 4(3), 34 (2016)CrossRefGoogle Scholar
  25. 25.
    ASTM standard no. D 1831-88. Standard test method for roll stability of lubricating grease. In: Annual book of ASTM standards. American Society for Testing and Materials, Philadelphia (1991)Google Scholar
  26. 26.
    ASTM standard no. D 2 17-88. Standard test methods for cone penetration of lubricating grease. In: Annual book of ASTM standards. American Society for Testing and Materials, Philadelphia (1991)Google Scholar
  27. 27.
    Lundberg, J., Hoglund, E.: A new method for determining the mechanical stability of lubricating greases. Tribol. Int. 33(3–4), 217–223 (2000)CrossRefGoogle Scholar
  28. 28.
    Rezasoltani, A., Khonsari, M.M.: On the correlation between mechanical degradation of lubricating grease and entropy. Tribol. Lett. 60(1), 1–4 (2015)CrossRefGoogle Scholar
  29. 29.
    Zhou, Y., Bosman, R., Lugt, P.M.: A model for shear degradation of lithium soap grease at ambient temperature. Tribol. Trans. 61(1), 61–70 (2018)CrossRefGoogle Scholar
  30. 30.
    Rezasoltani, A., Khonsari, M.M.: An engineering model to estimate consistency reduction of lubricating grease subjected to mechanical degradation under shear. Tribol. Int. 103, 465–474 (2016)CrossRefGoogle Scholar
  31. 31.
    Kuhn, E.: Correlation between system entropy and structural changes in lubricating grease. Lubricants 3(2), 332–345 (2015)CrossRefGoogle Scholar
  32. 32.
    Kuhn, E.: Tribological stress of lubricating greases in the light of system entropy. Lubricants 4(4), 37 (2016)CrossRefGoogle Scholar
  33. 33.
    Lijesh, K.P., Khonsari, M.M., Satish, V.K.: On the integrated degradation coefficient for adhesive wear: a thermodynamic approach. Wear 408, 138–150 (2018)CrossRefGoogle Scholar
  34. 34.
    Lijesh, K.P., Khonsari, M.M.: On the onset of steady state during transient adhesive wear. Tribol. Int. 130, 378–386 (2019)CrossRefGoogle Scholar
  35. 35.
    Lijesh, K.P., Khonsari, M.M.: On the degradation of tribo-components in boundary and mixed lubrication regimes. Tribol. Lett. 67, 12 (2019)CrossRefGoogle Scholar

Copyright information

© Springer Science+Business Media, LLC, part of Springer Nature 2019

Authors and Affiliations

  1. 1.Department of Mechanical Engineering and Industrial EngineeringLouisiana State UniversityBaton RougeUSA

Personalised recommendations