Advertisement

Modelling Both the NH3 Storage on Automotive SCR Catalysts and the Radio-Frequency-Based Response

  • Markus Dietrich
  • Gunter Hagen
  • Ralf MoosEmail author
Original Paper
  • 26 Downloads

Abstract

Since the ammonia (NH3) based selective catalytic reduction is today’s main DeNOx strategy to meet the emission limits for Diesel cars, research focuses on sensor and control approaches for higher conversion efficiencies and system robustness. One novel approach is the catalyst state monitoring based on radio frequencies (RF). It has proven its functionality to monitor the NH3 loading on SCR catalysts directly in previous studies. This study shows the first attempt to fully describe the whole RF SCR system by simulation. A divided model into the chemical reactions and the RF response is presented and parameterized on experimental test runs. The application of the adjusted model on a test run that was not included in parameter fitting correlates well with the simulated signals and the measured catalyst behavior as well as with the RF response.

Keywords

SCR catalyst NH3 storage Microwaves Radio frequencies catalyst monitoring OBD 

Notes

References

  1. 1.
    Koebel M, Elsener M, Marti T (1996) NOx-reduction in diesel exhaust gas with urea and selective catalytic reduction. Combust Sci Tech 121:85–102.  https://doi.org/10.1080/00102209608935588 CrossRefGoogle Scholar
  2. 2.
    Forzatti P (2001) Present status and perspectives in de-NOx SCR catalysis. Appl Catal A 222(1–2):221–236.  https://doi.org/10.1016/S0926-860X(01)00832-8 CrossRefGoogle Scholar
  3. 3.
    Guan B, Zhan R, Lin H, Huang Z (2014) Review of state of the art technologies of selective catalytic reduction of NOx from diesel engine exhaust. Appl Therm Eng 66(1–2):395–414.  https://doi.org/10.1016/j.applthermaleng.2014.02.021 CrossRefGoogle Scholar
  4. 4.
    Koebel M, Elsener M (1998) Selective catalytic reduction of NO over commercial DeNOx-catalysts: experimental determination of kinetic and thermodynamic parameters. Chem Eng Sci 53(4):657–669.  https://doi.org/10.1016/S0009-2509(97)00342-4 CrossRefGoogle Scholar
  5. 5.
    Yuan X, Liu H, Gao Y (2015) Diesel engine SCR control: current development and future challenges. Emiss Control Sci Technol 1(2):121–133.  https://doi.org/10.1007/s40825-015-0013-z CrossRefGoogle Scholar
  6. 6.
    Opitz B, Bendrich M, Drochner A, Vogel H, Hayes RE, Forbes JF, Votsmeier M (2015) Simulation study of SCR catalysts with individually adjusted ammonia dosing strategies. Chem Eng J 264:936–944.  https://doi.org/10.1016/j.cej.2014.11.114 CrossRefGoogle Scholar
  7. 7.
    Moos R (2010) Catalysts as sensors—a promising novel approach in automotive exhaust gas aftertreatment. Sensors 10(7):6773–6787.  https://doi.org/10.3390/s100706773 CrossRefGoogle Scholar
  8. 8.
    Moos R (2015) Microwave-based catalyst state diagnosis—state of the art and future perspectives. SAE Int J Engines 8(3):1240–1245.  https://doi.org/10.4271/2015-01-1042 CrossRefGoogle Scholar
  9. 9.
    Chen P, Schönebaum S, Simons T, Rauch D, Dietrich M, Moos R, Simon U (2015) Correlating the integral sensing properties of zeolites with molecular processes by combining broadband impedance and DRIFT spectroscopy—a new approach for bridging the scales. Sensors 15:28915–28941.  https://doi.org/10.3390/s151128915 CrossRefGoogle Scholar
  10. 10.
    Rauch D, Kubinski D, Cavataio G, Upadhyay D, Moos R (2015) Ammonia loading detection of zeolite SCR catalysts using a radio frequency based method. SAE Int J Engines 8(3):1126–1135.  https://doi.org/10.4271/2015-01-0986 CrossRefGoogle Scholar
  11. 11.
    Dietrich M, Rauch D, Simon U, Porch A, Moos R (2015) Ammonia storage studies on H-ZSM-5 zeolites by microwave cavity perturbation: correlation of dielectric properties with ammonia storage. J Sens Sens Syst 4(2):263–269.  https://doi.org/10.5194/jsss-4-263-2015 CrossRefGoogle Scholar
  12. 12.
    Dietrich M, Hagen G, Reitmeier W, Burger K, Hien M, Grass P, Kubinski D, Visser J, Moos R (2017) Radio-frequency-controlled urea dosing for NH3-SCR catalysts: NH3 storage influence to catalyst performance under transient conditions. Sensors 17:2746.  https://doi.org/10.3390/s17122746 CrossRefGoogle Scholar
  13. 13.
    Rauch D, Dietrich M, Simons T, Simon U, Porch A, Moos R (2017) Microwave cavity perturbation studies on H-form and Cu Ion-exchanged SCR catalyst materials: correlation of ammonia storage and dielectric properties. Top Catal 60:243–249.  https://doi.org/10.1007/s11244-016-0605-z CrossRefGoogle Scholar
  14. 14.
    Dietrich M, Steiner C, Hagen G, Moos R (2017) Radio-frequency-based urea dosing control for diesel engines with ammonia SCR catalysts. SAE Int J Engines 10(4):1638–1645.  https://doi.org/10.4271/2017-01-0945 CrossRefGoogle Scholar
  15. 15.
    Deutschmann O (2015) Modeling of the interactions between catalytic surfaces and gas-phase. Catal Lett 145(1):272–289.  https://doi.org/10.1007/s10562-014-1431-1 CrossRefGoogle Scholar
  16. 16.
    Olsson L, Wijayanti K, Leistner K, Kumar A, Joshi SY, Kamasamudram K, Currier NW, Yezerets A (2015) A multi-site kinetic model for NH3-SCR over Cu/SSZ-13. Appl Catal B 174:212–224.  https://doi.org/10.1016/j.apcatb.2015.02.037 CrossRefGoogle Scholar
  17. 17.
    Wang TJ, Baek S, Kwon HJ, Kim YJ, Nam I-S, Cha M-S, Yeo GK (2011) Kinetic parameter estimation of a commercial Fe-Zeolite SCR. Ind Eng Chem Res 50(5):2850–2864.  https://doi.org/10.1021/ie101558d CrossRefGoogle Scholar
  18. 18.
    Toops TJ: The measured and proposed chemistry of the Selective Catalytic Reduction of NOx, Modegat IV, 14.09.2015, Bad Herrenalb, GermanyGoogle Scholar
  19. 19.
    Nova I, Colombo M, Tronconi E (2011) Kinetic modeling of dynamic aspects of the standard NH3-SCR reaction over V2O5-WO3/TiO2 and Fe-zeolite commercial catalysts for the aftertreatment of diesel engines exhausts. Oil Gas Sci Technol 66(4):681–691.  https://doi.org/10.2516/ogst/2011132 CrossRefGoogle Scholar
  20. 20.
    Dietrich M, Hagen G, Moos R (2019) Dielectric properties and temperature dependency of automotive catalyst coatings and substrate materials: experimental results, influences and approximation approach. Func Mater Lett. in press.  https://doi.org/10.1142/S1793604719500243 Google Scholar

Copyright information

© Springer Science+Business Media, LLC, part of Springer Nature 2019

Authors and Affiliations

  1. 1.Department of Functional Materials, Bayreuth Engine Research Center (BERC), Zentrum für Energietechnik (ZET)University of BayreuthBayreuthGermany
  2. 2.Division Powertrain, Sensors & Actuator, Advanced DevelopmentContinental Automotive GmbHRegensburgGermany

Personalised recommendations