Advertisement

Effect of Textured Dentated Surfaces on 30KhGSA Steel Damage and Life at Fatigue, Fretting Fatigue, and Fretting

  • G. V. Tsyban’ovEmail author
  • V. E. Marchuk
  • O. O. Mikosyanchyk
Article

Machines and constructions are noted to contain components, units, and assemblies, which are joined together, forming a large number of contacting pairs. At operating loads, the latter become sources of material damage as a result of fretting fatigue and fretting wear. The safety and long-term operation of those items would require studies on the nature of these processes and search for the methods of reducing their intensity. Investigation results for the effect of textured surfaces in the form of a dent (recess) network and electric-spark VK8 alloy embedding over 30KhGSA steel specimen surfaces on fatigue, fretting fatigue, and fretting wear characteristics are presented. The dent network is formed by plastic indentation using a specially developed device. This process initiates residual tensile stresses. Their optimization was carried out with computation-experimental correlation between the geometrical ratios of dent network parameters (spacing between dent rows, in-row spacing, dent depth). Discrete VK8 alloy-embedded surfaces were generated with the electric-spark method, providing optimum process parameters. Textured surfaces reduce fatigue and fretting fatigue resistance, while enhancing the fretting wear one in comparison with smooth surfaces. Additional treatment of the textured dentated surface with the ion-plasma thermocyclic nitriding method greatly increases the fatigue and fretting fatigue resistance of 30KhGSA steel. Electric-spark VK8 alloy embedding results in worse fatigue and fretting fatigue properties, which is determined by the surface formation technology and difference between embedded particle and base metal characteristics.

Keywords

fretting fretting fatigue cyclic life wear textured surface nitriding 

References

  1. 1.
    A. Ferjaoui, T. Yue, M. Abdel Wahab, and R. Hojjati-Talemi, “Prediction of fretting fatigue crack initiation in double lap bolted joint using continuum damage mechanics,” Int. J. Fatigue, 73, 66–76 (2015).CrossRefGoogle Scholar
  2. 2.
    Y. K. Chen, L. Han, Chrysanthou, and J. M. O’Sullivan, “Fretting wear in self-piercing riveted aluminium alloy sheet,” Wear, 255, Nos. 7–12, 1463–1470 (2003).Google Scholar
  3. 3.
    T. Juuma, “Torsional fretting fatigue strength of a shrink-fitted shaft with a grooved hub,” Tribol. Int., 33, No. 8, 537–543 (2000).CrossRefGoogle Scholar
  4. 4.
    C. Ruiz, P. H. B. Boddington, and K. C. Chen, “An investigation of fatigue and fretting in a dovetail joint,” Exp. Mech., 24, No. 3, 208–217 (1984).CrossRefGoogle Scholar
  5. 5.
    M. J. He and C. Ruiz, “Fatigue life of dovetail joints: verification of a simple biaxial model,” Exp. Mech., 29, No. 2, 126–131 (1989).CrossRefGoogle Scholar
  6. 6.
    J. Vallory, “Methodology of PWR fuel rod vibration and fretting evaluation in HERMES facilities,” in: Structural Behaviour of Fuel Assemblies for Water Cooled Reactors (Proc. of a Technical Meeting), IAEA-TECDOC-1454, International Atomic Energy Agency (IAEA), Vienna (2005), pp. 221–230.Google Scholar
  7. 7.
    M. Helmi Attia, “Fretting fatigue and wear damage of structural components in nuclear power stations – Fitness for service and life management perspective,” Tribol. Int., 39, No. 10, 1294–1304 (2006).CrossRefGoogle Scholar
  8. 8.
    D. W. Hoeppner, “Fretting fatigue case studies of engineering components,” Tribol. Int., 39, No. 10, 1271–1276 (2006).CrossRefGoogle Scholar
  9. 9.
    J. J. Madge, S. B. Leen, and P. H. Shipway, “The critical role of fretting wear in the analysis of fretting fatigue,” Wear, 263, Nos. 1–6, 542–551 (2007).Google Scholar
  10. 10.
    S. Munoz, H. Proudhon, J. Domirnguez, and S. Fouvry, “Prediction of the crack extension under fretting wear loading conditions,” Int. J. Fatigue, 28, No. 12, 1769–1779 (2006).CrossRefGoogle Scholar
  11. 11.
    V. V. Shevelya and G. S. Kalda, Fretting Fatigue of Metals [in Russian], Podillya, Khmelnitsky (1998).Google Scholar
  12. 12.
    B. A. Lyashenko, A. Ya. Movshovich, and A. I. Dolmatov, “Strengthening of a discrete surface structure”, Tekhnol. Sist., No. 4, 17–25 (2001).Google Scholar
  13. 13.
    I. Etsion, “State of the art in laser surface texturing,” in: Proc. of the 7th Biennial Conf. on Engineering Systems Design and Analysis (July 19–22, 2004, Manchester, UK), Paper No. ESDA2004-58058, American Society of Mechanical Engineers (2004), pp. 585–593.Google Scholar
  14. 14.
    O. E. Plyusnin, I. F. Shul’ga, O. I. Shul’ga, and V. E. Marchuk, Device for the Recess Relief Formation on the Flat Friction Surface Holding Lubricants [in Ukrainian], Patent 13762 Ukraine, Valid since April 17, 2006, Bul. No. 4.Google Scholar
  15. 15.
    V. E. Marchuk, “Stress-strain state of textured surfaces of tribological systems,” Probl. Tert. Znosh., No. 3 (64), 89–93 (2014).Google Scholar
  16. 16.
    B. A. Lyashenko, E. K. Solovykh, V. I. Mirnenko, et al., Optimization of Discrete Surface Formation Technology after Strength and Wear Resistance Criteria [in Russian], Pisarenko Institute of Problems of Strength, National Academy of Sciences of Ukraine, Kiev (2010).Google Scholar
  17. 17.
    G. V. Tsyban’ov, V. E. Marchuk, O. M. Herasymchuk, and V. V. Zhyginas, “Fretting fatigue of aviation components,” Probl. Tert. Znosh., No. 2 (49), 177–190 (2008).Google Scholar
  18. 18.
    N. L. Golego, A. Ya. Alyab’ev, and V. V. Shevelya, Fretting Corrosion of Metals [in Russian], Tekhnika, Kiev (1974).Google Scholar
  19. 19.
    C. D. Lykins, S. Mall, and V. Jain, “A shear stress-based parameter for fretting fatigue crack initiation,” Fatigue Fract. Eng. Mater. Struct., 24, No. 7, 461–473 (2001).CrossRefGoogle Scholar
  20. 20.
    H. Zhang, J. Liu, and Z. Zuo, “Numerical study of the effects of residual stress on fretting fatigue using XFEM,” Materials, 8, No. 10, 7094–7105 (2015).CrossRefGoogle Scholar
  21. 21.
    V. E. Marchuk, “Wear resistance of discrete surfaces at fretting wear,” Visn. NAU, Issue 2 (43), 40–45 (2019).Google Scholar
  22. 22.
    V. E. Marchuk, O. I. Dukhota, and N. O. Naumenko, “Studies on the wear resistance of electric-spark discrete surfaces at fretting wear,” Probl. Tert. Znosh., Issue 56, 84–93 (2011).Google Scholar
  23. 23.
    S. Y. Sirin, K. Sirin, and E. Kaluc, “Effect of the ion nitriding surface hardening process on fatigue behavior of AISI 4340,” Mater. Charact., 59, No. 4, 351–358 (2008).CrossRefGoogle Scholar
  24. 24.
    V. M. Zinchenko, Engineering of the Gear Wheel Surface by Chemothermal Treatment Methods [in Russian], Bauman MGTU, Moscow (2001).Google Scholar
  25. 25.
    J. D. Costa, J. M. Ferreira, and A. L. Ramalho, “Fatigue and fretting of ion-nitrided 34CrNiMo6 steel,” Theor. Appl. Fract. Mech., 35, No. 1, 69–79 (2001).CrossRefGoogle Scholar
  26. 26.
    B. A. Lyashenko, V. I. Mirnenko, A. V. Rutkovskii, and O. V. Rad’ko, Method of the Surface Strengthening of Steel Components with Ion-Plasma Nitriding in a Pulsed Glow Discharge [in Ukrainian], Patent 19782 Ukraine, Valid since December 15, 2006, Bul. No. 12.Google Scholar
  27. 27.
    G. V. Tsybanov, V. E. Marchuk, and V. V. Zhiginas, “Fretting-resistance of aircraft tribological assembly details in the conditions of alternating loads,” in: Aviation in the XXI-st Century, Safety in Aviation and Space Technology (Proc. of the 3rd World Congress, September 22–24, 2008, Kiev), Vol. 1, National Aviation University, Kiev (2008), pp. 14.14–14.17.Google Scholar

Copyright information

© Springer Science+Business Media, LLC, part of Springer Nature 2019

Authors and Affiliations

  • G. V. Tsyban’ov
    • 1
    Email author
  • V. E. Marchuk
    • 2
  • O. O. Mikosyanchyk
    • 2
  1. 1.Pisarenko Institute of Problems of StrengthNational Academy of Sciences of UkraineKyivUkraine
  2. 2.National Aviation UniversityKyivUkraine

Personalised recommendations