Advertisement

Strength of Materials

, Volume 51, Issue 1, pp 40–55 | Cite as

Thermomechanical Coupling Model for a Stainless Steel-Clad Plate on Heat Treatment

  • B. GuanEmail author
  • Y. Zang
  • F. Yang
  • X. Y. Yang
  • Q. Qin
Article
  • 3 Downloads

Quick and correct prediction of the internal stress and deformation of stainless steel-clad plates on heat treatment is a problem of specific interest. A thermomechanical coupling model based on the engineering elastic-plastic theory is detailed. The discretization method and difference equations used simultaneously provide effective numerical calculations for the model. The generalized finite element model verifies relevant simplification conditions and efficiency of the numerical calculation logic. Heat treatment experiments of clad plates are also designed and presented, and the ability of the model to predict the stress and deformation behavior of the clad plate in the actual heat treatment process is evaluated. The calculation logic of the model is reasonable, and the prediction error of deformation and internal stress of the plate is ~15%. The model exhibits an extremely high computational efficiency and can meet the requirements of on-line analysis for heat treatment processes.

Keywords

stainless steel-clad plates heat treatment thermomechanical coupling model deformation and internal stress prediction 

References

  1. 1.
    Y. Jing, Y. Qin, X. Zang, and Y. Li, “The bonding properties and interfacial morphologies of clad plate prepared by multiple passes hot rolling in a protective atmosphere,” J. Mater. Process. Tech., 214, No. 8, 1686–1695 (2014).Google Scholar
  2. 2.
    L. Li, F. X. Yin, and K. Nagai, “Progress of laminated materials and clad steels production,” Mater. Sci. Forum, 675–677, 439–447 (2011).Google Scholar
  3. 3.
    L. Li, K. Nagai, F. Yin, “Progress in cold roll bonding of metals,” Sci. Technol. Adv. Mater., 9, No. 2, 023001 (2008), doi:  https://doi.org/10.1088/1468-6996/9/2/023001.Google Scholar
  4. 4.
    M. Yang, X. Zuo, M. Zhao, and J. Wang, “Research Progress of manufacturing technology for stainless steel clad plate,” Hot Work. Technol., No. 20, 93–96 (2012).Google Scholar
  5. 5.
    H. Liu, X. Zhang, and L. Li, “Effects of heat treatment on microstructure and properties of hot rolled stainless steel clad plate,” Trans. Mater. Heat Treat., 38, No. 6, 67–70 (2013).Google Scholar
  6. 6.
    G. Xie, Z. Luo, G. Wang, et al., “Interface characteristic and properties of stainless steel/HSLA steel clad plate by vacuum rolling cladding,” Mater. Trans., 52, No. 8, 1709–1712 (2011).Google Scholar
  7. 7.
    I. Hordych, D. Rodman, F. Nürnberger, et al., “Effect of pre-rolling heat treatments on the bond strength of cladded galvanized steels in a cold roll bonding process,” Steel Res. Int., 87, No. 12, 1619–1626 (2016).Google Scholar
  8. 8.
    N. V. Rao, D. S. Sarma, S. Nagarjuna, and G. M. Reddy, “Influence of hot rolling and heat treatment on structure and properties of HSLA steel explosively clad with austenitic stainless steel,” Mater. Sci. Technol., 25, No. 11, 1387–1396 (2009).Google Scholar
  9. 9.
    H. Jiang, X. Yan, J. Liu, and X. Duan, “Effect of heat treatment on microstructure and mechanical property of Ti–steel explosive-rolling clad plate,” T. Nonferr. Metal. Soc., 24, No. 3, 697–704 (2014).Google Scholar
  10. 10.
    M. Yazdani, M. R. Toroghinejad, and S. M. Hashemi, “Effects of heat treatment on interface microstructure and mechanical properties of explosively welded Ck60/St37 plates,” J. Mater. Eng. Perform., 25, No. 12, 5330–5342 (2016).Google Scholar
  11. 11.
    Y. Trykov, L. Gurevich, D. Pronichev, and M. Trunov, “Influence of strain-hardened zones and intermetallic layers of explosion welded and heat treated Al/Cu laminated metal composites on the evolution of thermal conductivity coefficient,” Mater. Sci., 20, No. 3, 267–270 (2014).Google Scholar
  12. 12.
    H. J. Li, L. G. Li, Y. L. Li, and G. D. Wang, “Online monitor and control of cooling temperature on run-out table of hot strip mill,” Steel Res. Int., 86, No. 11, 1225–1233 (2015).Google Scholar
  13. 13.
    Y. Lee, S. Choi, and P. D. Hodgson, “Integrated model for thermo-mechanical controlled process in rod (or bar) rolling,” J. Mater. Process. Tech., 125–126, 678–688 (2002).Google Scholar
  14. 14.
    A. K. Singh and D. Mazumdar, “Comparison of several numerical prediction methods for thermal fields during phase transformation of plain carbon steels,” ISIJ Int., 31, No. 12, 1441–1444 (1991).Google Scholar
  15. 15.
    A. Mukhopadhyay and S. Sikdar, “Implementation of an on-line run-out table model in a hot strip mill,” J. Mater. Process. Tech., 169, No. 2, 164–172 (2005).Google Scholar
  16. 16.
    A. Saboonchi and S. Hassanpour, “Simulation-based prediction of hot-rolled coil forced cooling,” Appl. Therm. Eng., 28, No. 13, 1630–1637 (2008).Google Scholar
  17. 17.
    N. Mansouri, M. Mirhosseini, and A. Saboonchi, “Thermal modeling of strip across the transfer table in the hot rolling process,” Appl. Therm. Eng., 38, 91–104 (2012).Google Scholar
  18. 18.
    X. Chen, G. Wang, Y. Tian, et al., “An on-line finite element temperature field model for plate ultra fast cooling process,” J. Iron Steel Res. Int., 21, No. 5, 481–487 (2014).Google Scholar
  19. 19.
    G. Sun, H. N. Han, J. K. Lee, et al., “A finite element model for the prediction of thermal and metallurgical behavior of strip on run-out-table in hot rolling,” ISIJ Int., 42, No. 4, 392–400 (2002).Google Scholar
  20. 20.
    A. Milenin, R. Kuziak, M. Lech-Grega, et al., “Numerical modeling and experimental identification of residual stresses in hot-rolled strips,” Arch. Civ. Mech. Eng., 16, No. 1, 125–134 (2016).Google Scholar
  21. 21.
    H. H. Cho, Y. G. Cho, D. W. Kim, et al., “Finite element investigation for edge wave prediction in hot rolled steel during run out table cooling,” ISIJ Int., 54, No. 7, 1646–1652 (2014).Google Scholar
  22. 22.
    X. Wang, F. Li, Q. Yang, and A. He, “FEM analysis for residual stress prediction in hot rolled steel strip during the run-out table cooling,” Appl. Math. Model., 37, No. 1, 586–609 (2013).Google Scholar
  23. 23.
    Y. Lu and L. Cheng, Theory and Analysis of Heat Transfer, Science Press (1997).Google Scholar
  24. 24.
    Y. Y. Zhang, Z. W. Zhao, Q. Hu, et al., “Establishing and verifying mathematical models of inverse heat conduction problem during aerosol cooling process of the continuous casting,” Comput. Simul., 32, No. 1, 270–273 (2015).Google Scholar
  25. 25.
    A. M. Nawwar, K. McLachlan, and J. Shewchuk, “A modified hole-drilling technique for determining residual stresses in thin plates,” Exp. Mech., 16, No. 6, 226–232 (1976).Google Scholar

Copyright information

© Springer Science+Business Media, LLC, part of Springer Nature 2019

Authors and Affiliations

  • B. Guan
    • 1
    Email author
  • Y. Zang
    • 1
  • F. Yang
    • 1
  • X. Y. Yang
    • 1
  • Q. Qin
    • 1
  1. 1.School of Mechanical EngineeringUniversity of Science and Technology BeijingBeijingChina

Personalised recommendations