Advertisement

Strength of Materials

, Volume 50, Issue 6, pp 833–840 | Cite as

Computational Investigation of the Effect of Reinforcement Schemes and Angles on the Stress-Strain State and Strength of Composite Cylinders Under Axisymmetric Internal Explosion. Part 1. Effect of the Discretization Spacings of the Computational Domain on the Accuracy of Determination of Stress-Strain State and Strength

  • P. P. Lepikhin
  • V. A. Romashchenko
  • O. S. Beiner
  • S. A. Tarasovskaya
SCIENTIFIC AND TECHNICAL SECTION
  • 5 Downloads

The effect of two-dimensional regular finite-difference mesh spacings on the accuracy of calculation of the dynamic axisymmetric stress-strain state and strength of hollow composite cylinders of finite length, fixed overall dimensions and thickness has been numerically determined by the Wilkins method modified for helical orthotropy and implemented in an application package, created earlier by the authors. The cylinders were made by a ribbon consisting of VMPS glass fibers, impregnated with an ÉDT-10 epoxy binder, on a technological mandrel. Loading is done by exploding a spherical explosive charge in the center of symmetry of a cylinder in an air atmosphere. The obtained results allow one to choose mesh spacings along the radial and axial coordinates, which ensure an acceptable accuracy of determination of the maximum values of hoop stresses and strains, as well as strength functions by maximum stress and strain criteria and by the generalized von Mises criterion.

Keywords

modified two-dimensional Wilkins method application package discretization spacings and calculation accuracy single- and two-layer composite cylinders internal explosive loading stress-strain state strength 

References

  1. 1.
    P. P. Lepikhin and V. A. Romashchenko, Strength of Inhomogeneous Anisotropic Hollow Cylinders under Impulsive Loading [in Russian], Naukova Dumka, Kiev (2014).Google Scholar
  2. 2.
    N. A. Abrosimov and A. V. Elesin, “Mathematical modeling of the progressive fracture of cylindrical composite shells under multiple impulsive loading,” in: Proc. of the XI Int. Conf. on Nonequilibrium Processes in Nozzles and Jets (NPNJ’2016) (May 25–31, 2016, Alushta) [in Russian], MAI, Moscow (2016), pp. 287–289.Google Scholar
  3. 3.
    N. A. Abrosimov and N. A. Novosel’tseva, “Numerical analysis of the progressive fracture process in cylindrical metal-filled plastic shells under impulsive loading,” in: Proc. of the XI Int. Conf. on Nonequilibrium Processes in Nozzles and Jets (NPNJ’ 2016) (May 25–31, 2016, Alushta) [in Russian], MAI, Moscow (20016), pp 289–291.Google Scholar
  4. 4.
    A. I. Abakumov, P. N. Nizovtsev, V. P. Solov’ev, et al., “A computational-experimental study of the stress-strain state of composite shells of revolution under dynamic loading with allowance for large strains,” Mekh. Kompoz. Mater., 34, No. 1, 28–37 (1998).Google Scholar
  5. 5.
    N. A. Abrosimov and A. V. Elesin, “Numerical analysis of the effect of reinforcement structure on the dynamic behavior of cylindrical composite shells under explosive loading,” Probl. Prochn. Plastichn., Issue 74, 78–83 (2012).Google Scholar
  6. 6.
    N. A. Abrosimov, A. V. Elesin, and N. A. Novosel’tseva, “Numerical analysis of the effect of reinforcement structure on the dynamic behavior and ultimate deformability of composite shells of revolution,” Mekh. Kompoz. Mater., 50, No. 2, 313–326 (2014).Google Scholar
  7. 7.
    N. A. Abrosimov, A. V. Elesin, and S. A. Pirogov, “Numerical analysis of the non-axisymmetric deformation and progressive fracture of cylindrical laminated composite shells under impulsive loading,” Probl. Prochn. Plastichn., 77, No. 1, 23–32 (2015).Google Scholar
  8. 8.
    N. A. Abrosimov and N. A. Novosel’tseva, “Numerical simulation of the process of layer-by-layer failure of cylindrical shells under explosive loading,” Mekh. Kompoz. Mater., 51, No. 4, 579–594 (2015).Google Scholar
  9. 9.
    P. P. Lepikhin, V. A. Romashchenko, O. S. Beiner, et al., “A program for numerical calculation of dynamic stress-strain state and strength of hollow multilayer anisotropic cylinders and spheres. Part 2. Comparison of numerical results with experimental and theoretical for cylinders,” Strength Mater., 47, No. 3, 406–414 (2015).CrossRefGoogle Scholar
  10. 10.
    P. P. Lepikhin, V. A. Romashchenko, and O. S. Beiner, “Theoretical investigation of fracture in stress waves of anisotropic cylinder under internal explosion,” Strength Mater., 48, No. 5, 615–631 (2016).CrossRefGoogle Scholar
  11. 11.
    V. A. Romashchenko and O. S. Beiner, “Numeric simulation of three-dimensional dynamics and strength of multilayered spirally orthotropic cylinders,” Strength Mater., 44, No. 2, 187–195 (2012).CrossRefGoogle Scholar
  12. 12.
    V. A. Romashchenko, Yu. N. Babich, and E. V. Bakhtina, “Strength assessment for composite and metal-composite cylinders under pulse loading. Part 2. Numerical evaluation of strength for multilayer cylinders of finite length under internal explosion,” Strength Mater., 44, No. 5, 502–511 (2012).CrossRefGoogle Scholar
  13. 13.
    S. Nelson, B. O’Toole, and J. Thota, “Explosive testing of open cylinders for verification of composite properties used in computational analysis,” in: ASME 2012 Verification and Validation Symposium (May 2–4, 2012, Las Vegas, NV) (2012).Google Scholar
  14. 14.
    P. P. Lepikhin, V. A. Romashchenko, and O. S. Beiner, “A numerical study of 3D dynamics and strength of metal-composite cylinders under internal explosion loading,” Strength Mater., 49, No. 6, 796–808 (2017).CrossRefGoogle Scholar
  15. 15.
    V. V. Adishchev, V. M. Kornev, and L. A. Talzi, Evaluation of Maximum Stresses in Closed Cylindrical Vessels under Axisymmetric Explosive Loading [in Russian], Deposited in VINITI, No. 6588-83, Novosibirsk (1983).Google Scholar
  16. 16.
    G. Randers-Pehrson and K. A. Bannister, Airblast Loading Model for DYNA2D and DYNA3D, Technical report ARL-TR-1310, Army Research Laboratory (1997).Google Scholar
  17. 17.
    P. P. Lepikhin, V. A. Romashchenko, O. S. Beiner, et al., “A program for numerical calculation of dynamic stress-strain state and strength of hollow multilayer anisotropic cylinders and spheres. Part 1. Program description,” Strength Mater., 47, No. 2, 249–256 (2017).CrossRefGoogle Scholar
  18. 18.
    A. G. Fedorenko, M. A. Syrunin, and A. G. Ivanov, “Dynamic strength of shells made of oriented fibrous composites under explosive loading (review),” Prikl. Mekh. Tekhn. Fiz., No. 1, 126–132 (1993).Google Scholar
  19. 19.
    A. G. Ivanov (Ed.), Fracture of Multi-Scale Objects in the Explosion [in Russian], RFYaTs-VNIIÉF, Sarov (2001).Google Scholar
  20. 20.
    A. G. Fedorenko, M. A. Syrunin, and A. G. Ivanov, “Criteria for the choice of composite materials for shell structures localizing explosion (review),” Fiz. Goren. Vzryv., No. 5, 3–11 (2005).Google Scholar

Copyright information

© Springer Science+Business Media, LLC, part of Springer Nature 2019

Authors and Affiliations

  • P. P. Lepikhin
    • 1
  • V. A. Romashchenko
    • 1
  • O. S. Beiner
    • 1
  • S. A. Tarasovskaya
    • 1
  1. 1.Pisarenko Institute of Problems of StrengthNational Academy of Sciences of UkraineKievUkraine

Personalised recommendations