Advertisement

Soil Mechanics and Foundation Engineering

, Volume 51, Issue 5, pp 227–233 | Cite as

Analysis of Practical Application of Screw-in Cast Piles

  • R. A. Mangushev
  • V. V. Konyushkov
  • I. P. D’yakonov
DESIGN
  • 85 Downloads

Characteristics of the design and fabrication procedure for “Fundex” and “Atlas” screwin cast piles are examined, and basic advantages and disadvantages of their use under conditions of the highly deformable saturated soils of Saint Petersburg are analyzed. Recommendation are given for safe installation of cast-in-place piles indense urban settings.

Keywords

Casing Bearing Capacity Pile Group Excess Pore Pressure Pile Head 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    “Fundex” cast-in-place piles: advantages and disadvantages,” Vestn. VolgGASU, Ser. Stroit. Archit. Stroit. Nauki, Part 2, 50, No. 31, 264-271 (2013).Google Scholar
  2. 2.
    Professor A. F. Van Viila, Guidelines for “Fundex” Piles, Netherlands (1982), pp. 19-32.Google Scholar
  3. 3.
    R. A. Mangushev, A. V. Ershov, and A. I. Osokin, Modern Piling Technologies [in Russian], 2nd edition, additions, Izdatel’stvo ASV, Moscow (2010).Google Scholar
  4. 4.
    K. Fleming, A. Weltman, M. Randolph, and K. Elson, Piling Engineering, 3rd edition, New York, pp. 127, 272-280 (2009).Google Scholar
  5. 5.
    V. F. Van Impe, Deep Foundations [Russian translation], Saint Petersburg (2004).Google Scholar
  6. 6.
    Building Code 24.13330.2011. Pile Foundations [in Russian].Google Scholar
  7. 7.
    Design Guidelines for Pile Foundations [in Russian], N. M. Gersevanov Scientific-Research Institute of Foundations and Underground Structures, Stroiizdat, Moscow (1980).Google Scholar
  8. 8.
    R. A. Mangushev, A. V. Ershov, and S. V. Ershov, “Assessment of the effect of the fabrication procedure employed for cast-in-place piles on the structure of the soil mass,” Vestn. Grazhd. Inzhenerov, 19, No. 2, 116-120, Saint Petersburg State Architectural and Civil-Engineering University (2009).Google Scholar
  9. 9.
    V. V. Verstov, Technology and Complex Mechanization of Sheet-Piling and Piling Operations [in Russian], (2nd stereotypic edition), Izdatel;stvo Lan’, Saint Petersburg, pp. 118-124 (2012).Google Scholar
  10. 10.
    V. M. Ulitskii, A. G. Shashkin, and K. G. Shashkin, Guide to Geotechnical Engineering [in Russian], 2nd edition, additions, Saint Petersburg, p. 284 (2012).Google Scholar
  11. 11.
    Chandra, Prediction and observation of pore pressure due to pile driving, Third International Conference on Case Histories in Geotechnical Engineering, paper No. 1.66, Saint Louis, Missouri, June 1-4, 1993.Google Scholar
  12. 12.
    R. A. Mangushev and S. V. Ershov, “Fundex” and CFA piles − new technologies for installation of cast-in-place piles, Interuniversity Collection of Proceedings “Scientific-Practical and Theoretical Problems of Geotechnical Engineering” [in Russian], Saint Petersburg (2007), pp. 143-152.Google Scholar
  13. 13.
    Dan A, Brown, Ph.D, P. E., “Design and construction of continuous flight auger (CFA) piles,” Geotech. Engin. Circ., No. 8, 104-107, 42-43 (2007), Washington, United States.Google Scholar

Copyright information

© Springer Science+Business Media New York 2014

Authors and Affiliations

  • R. A. Mangushev
    • 1
  • V. V. Konyushkov
    • 1
  • I. P. D’yakonov
    • 1
  1. 1.Saint Petersburg State Architectural and Civil Engineering UniversitySt. PetersburgRussia

Personalised recommendations