Advertisement

Refractories and Industrial Ceramics

, Volume 60, Issue 2, pp 227–231 | Cite as

Design of Ceramic End Cutters for Innovative Technological Processes Performed with Regard for Their Stress-Strain State. The Choice of Ceramics. Part 2

  • V. V. KuzinEmail author
  • S. N. Grigor’ev
Article
  • 14 Downloads

We study the inhomogeneity of stresses on the boundaries of the main structural elements of Al2O3-ceramics under the conditions of unsteady thermoelasticity, which are of especial importance for the development of recommendations concerning the choice of ceramics for the end ceramic cutters.

Keywords

ceramic end cutter Al2O3-ceramics nonsteady thermoelasticity stress-strain state 

References

  1. 1.
    V. V. Kuzin, S. N. Grigor’ev, and M. A. Volosova, “Design of ceramic end cutters for innovative technological processes with regard for their stress-strain state. The choice of ceramics. Part 1,” Novye Ogneupory, No. 10, 68 – 73 (2018).Google Scholar
  2. 2.
    A. S. Vereshchaka, V. M. Provotorov, V. V. Kuzin, et al., “Investigation of the thermal state of cutting tools with the help of thermoindicating substances,” Vestn. Mashinostr., No. 1, 45 – 49 (1986).Google Scholar
  3. 3.
    V. V. Kuzin, S. N. Grigor’ev, and M. A. Volosova, “The role of the thermal factor in the wear mechanism of ceramic tools: Part 1. Macrolevel,” J. Frict. Wear, 35(6), 505 – 510 (2014).CrossRefGoogle Scholar
  4. 4.
    V. V. Kuzin, S. N. Grigor’ev, and M. Yu. Fedorov, “Role of the thermal factor in the wear mechanism of ceramic tools. Part 2: Microlevel,” J. Frict. Wear, 36(1), 40 – 44 (2015).CrossRefGoogle Scholar
  5. 5.
    V. V. Kuzin, Tools with Ceramic Cutting Plates [in Russian], Yanus-K, Moscow (2006).Google Scholar
  6. 6.
    S. N. Grigor’ev, V. I. Myachenkov, and V. V. Kuzin, “Automated thermal-strength calculations of ceramic cutting plates,” Russ. Eng. Research, 31(11), 1060 – 1066 (2011).CrossRefGoogle Scholar
  7. 7.
    V. Kuzin and S. Grigor’ev, “Method of investigation of the stress-strain state of surface layer of machine elements from a sintered nonuniform material,” Appl. Mech. Mater., 486, 32 – 35 (2014).CrossRefGoogle Scholar
  8. 8.
    S. N. Grigor’ev, V. V. Kuzin, A. D. Batako, et al., “Influence of thermal loads on the stress-strain state of aluminum-oxide ceramic cutting plates,” Russ. Eng. Research, 32(5), 473 – 477 (2012).CrossRefGoogle Scholar

Copyright information

© Springer Science+Business Media, LLC, part of Springer Nature 2019

Authors and Affiliations

  1. 1.“STANKIN” Moscow State Technological UniversityMoscowRussia

Personalised recommendations