Introduction to Ceramic Micromechanics. Ceramic Object Operating System

  • V. V. KuzinEmail author
  • S. N. Grigor’ev
  • V. N. Anikin

A system for the operation of ceramic objects, for which the aim is formulated, conditions and limits of functioning, the main and auxiliary functions, as well as correlation with a higher level system and the environment, is proposed. It is shown that a detailed study of relationships in this system using interdisciplinary methodology of “ceramic micromechanics” may provide a solution to the problem of the of ceramic object reliability. Starting points are determined for formation of aims and the problem of ceramic micromechanics.


ceramic objects (CO) reliability operation ceramic micromechanics 


Work was performed with financial support of the RF Ministry of Education and Science within the scope of fulfilling a state assignment in the sphere of scientific activity, project No. 9.1372.2017/4.6.

(To be continued)


  1. 1.
    V. L. Balkevich, “New generation ceramics,” Steklo Keram., No. 6, 17 – 20 (1988).Google Scholar
  2. 2.
    Yu. N. Drozdov and T. M. Savinova, “Engineering ceramic in highly loaded friction assemblies,” Vestn. Mashinostroeniya, No. 11, 28 – 32 (2005).Google Scholar
  3. 3.
    V. V. Kuzin, “Effective use of high density ceramic for manufacture of cutting and working tools,” Refract. Indust. Ceram., 51(6), 421 – 426 (2010).CrossRefGoogle Scholar
  4. 4.
    A. P. Garshin, V. M. Trp[yanov, G. P. Ziatsev, et al., Ceramics for Engineering [in Russian], Nauchtekhlitizdat, Moscow (2003).Google Scholar
  5. 5.
    G. G. Gnesin, I. I. Osipova, G. D. Ronmal’, et al., Ceramic Tool Materials [in Russian], Tekhnika, Kiev (1991).Google Scholar
  6. 6.
    o. P. Kulik, “State of development in the field of new ceramic materials. (Review of overseas publication),” Proshk. Metall., No. 1 / 2, 102 – 113 (1999).Google Scholar
  7. 7.
    V. K. Starkov, V. V. Kuzoin, V. F. Popov, et al., “Increase in the operating properties of objects made from ceramic materials by mechanical and thermal treatment,” in: Machine Building and Production, Series Progressive Production Processes in Engineering. Review of Information [in Russian], VNIIÉMR, Moscow (1989).Google Scholar
  8. 8.
    S. S. Ordan’yan, “Physicochemical basis of creating composite ceramic materials base on refractory compounds,” Ogneupory, No. 9/10, 10 – 14 (1992).Google Scholar
  9. 9.
    Yu. M. Mosin, “Some problems of developing technology and materials science for ceramics and refractories,” Ogneupory Tekhn. Keram., No. 4, 8 – 12 (1998).Google Scholar
  10. 10.
    V. A. Borisenko, Strength and Hardness of Refractory Materials at High Temperature [in Russian], Naukova Dumka, Kiev (1984).Google Scholar
  11. 11.
    G. A. Gogotsii and Ya. L. Grushevskii, “Effect of composition ion mechanical properties of materials based on silicon nitride,” Poroshk. Metall. No. 2, 93 – 96 (1986).Google Scholar
  12. 12.
    V. S. Bakunov and A. V. Belyakov, “ceramic strength and structure,” Ogneupory Tekhn. Keram., No. 3, 11 – 15 (1998).Google Scholar
  13. 13.
    G. P. Cherepanov, V. V. Stol’skii, and A. G. Tagi-Zade, “Optimum planning of some engineering materials,” Izv, Akad. Nauk ASSR, 29, 138 (1976).Google Scholar
  14. 14.
    S. N. Grigor’ev, V. V. Kuzin, M. N. Morgan, et al., “Influence of loads on the stress-strain state of aluminum-oxide ceramic cutting plates,” Russian Engineering Research, 32(1), 61 – 67 (2012).CrossRefGoogle Scholar
  15. 15.
    S. N. Grigor’ev, V. V. Kuzin, A. D. Batako, et al., “Influence of ceramic properties on the stress-strain state of a plate in steady heat conduction,” Russian Engineering Research, 32(4), 374 – 379 (2012).CrossRefGoogle Scholar
  16. 16.
    S. N. Grigor’ev, V. V. Kuzin, A. D. Batako, et al., “Influence of thermal loads on the stress–strain state of aluminum-oxide ceramic cutting plates,” Russian Engineering Research, 32(5), 473 – 477 (2012).CrossRefGoogle Scholar
  17. 17.
    S. N. Grigor’ev, V. V. Kuzin, and M. A. Volosova, “Stress-strain state of a coated nitride-ceramic tool,” Russian Engineering Research, 32(7/8), 561 – 566 (2012).CrossRefGoogle Scholar
  18. 18.
    V. V. Kuzin, S. N. Grigoriev, and M. Yu. Fedorov, “Role of the thermal factor in the wear mechanism of ceramic tools. Part 2: Microlevel,” J. Friction and Wear, 36(1), 40 – 44 (2015).CrossRefGoogle Scholar
  19. 19.
    G. A. Gogotskii, Ya. L. Grushevskii, and V. P. Zavada, “Approval of ceramics with respect to mechanical properties. Procedural aspects,” Ogneupory, No. 8, 23 – 27 (1988).Google Scholar
  20. 20.
    V. S. Bakunov and A. V. Belyakov, “Analysis of ceramic structure,” Izv. RAN Neorg. Mterialy., No. 2, 243 – 248 (1996).Google Scholar
  21. 21.
    M. V. Zernin and E. M. Morozov, “Failure mechanics of bodies with contact reaction,” in: Contact Reaction Mechanics [in Russian], Fizmatlit, Moscow (2001).Google Scholar
  22. 22.
    I. V. Kragel’skii, Friction and Wear, 2nd ed. [in Russian], Mashinostroenie, Moscow 91968).Google Scholar
  23. 23.
    V. V. Vorobei, E. V. Morozov, and O. V. Tatarnikov, Design of Thermally Stressed Structures of Composite Materials [in Russian], Mashinostroenie, Moscow (1992).Google Scholar
  24. 24.
    V. V. Kuzin, V. N. Anikin, S. Yu. Fedorov, et al., “Wear and failure of ceramic cutting plates,” Russian Engineering Research, 30(11), 1116 – 1123 (2010).CrossRefGoogle Scholar
  25. 25.
    V. I. Astaf’ev, T. V. Grogorova, and V. A. Pastukhov, Effect of material damage in the stress-strained state in the vicinity of a crack tip,” FKhMM, 28(1), 5 – 11 (1992).Google Scholar
  26. 26.
    E. Ya. Litovskii, F. S. Katan, and S. L. Bondarenko, “Change in the structure and thermophysical properties of quartz ceramic during rapid heating,” Ogneupory, No. 11, 42 – 46 (1986).Google Scholar
  27. 27.
    Yu. L. Krasulin, S. M. Barinov, and V. S. Ivanov, Structure and Failure of Materials Made from Refractory Compound Powders [in Russian], Nauka, Moscow (1985).Google Scholar
  28. 28.
    O. N. Grigor’ev, E. I. Trefilov, and A. M. Shatokhin, “Effect of temperature on brittle material failure with concentrated loading,” Poroshk. Metall., No. 12, 75 – 81 (1983).Google Scholar

Copyright information

© Springer Science+Business Media, LLC, part of Springer Nature 2019

Authors and Affiliations

  • V. V. Kuzin
    • 1
    Email author
  • S. N. Grigor’ev
    • 1
  • V. N. Anikin
    • 2
  1. 1.FGBOU VO Moscow State Technological University StankinMoscowRussia
  2. 2.FGAOU VO National Research Technological University MISiSMoscowRussia

Personalised recommendations