Modeling of the Phase Composition of Refractory and Slag Systems, Optimization of Slag Adjustment, and Stabilization of Secondary Steelmaking Slags

  • V. V. KozlovEmail author
  • A. P. Shevchik
  • S. A. Suvorov
  • N. V. Arbuzova
  • D. V. Kuznetsov

A procedure for modeling phase formation in the multicomponent CaO–MgO–Al2O3–SiO2–FeO–Fe2O3 oxide system has been proposed. This procedure can be used to predict the equilibrium phase composition of both the refractory and refractory-slag systems in order to modify the chemical composition of smelter slags, improve the service life of the lining of the metallurgical units, and deliberately provide them with the properties of mineral binders.


ladle ladle-oven slag corrosion secondary steelmaking 


The results were obtained within the scope of the State assignment by the Ministry of Education and Science of the Russian Federation (number for publications: 10.9644.2017/8.9) and a combined project on creation of hi-tech production under the topic: “Development and implementation of knowledge-intensive technology of manufacturing cold-resistant and corrosion-resistant rolled products to produce longitudinally welded oil and gas pipelines within the scope of infrastructural development of the Fuel and Energy Complex (FEC) of the Russian Federation for the purpose of import phase-out” according to Resolution No. 218 of the Russian Federation Government dated April 9, 2010, contract No. 02.G25.31.0141).


  1. 1.
    O. Yu. Sheshukov, Stabilization of refining slag by adjusting its phase composition and giving it the properties of mineral binders, O. Yu. Sheshukov, I. V. Nekrasov, M. A. Mikheenkov, et al., Refractories and Industrial Ceramics, 58(3), 324 – 330 (2017).Google Scholar
  2. 2.
    I. V. Kushnerev, Stabilization of secondary steelmaking slags from silicate disintegration, Abstract, Int. Conf. Refr. Metallurg. (April 19 – 20, 2018; Moscow), I. V. Kushnerev, M. B. Orzhekh, B. B. Libanov, et al., Novye Ogneupory, No. 4, p. 44 (2018).Google Scholar
  3. 3.
    S. Brugmann, MgO contribution to correcting the secondary steelmaking slag composition, S. Brugmann, Novye Ogneupory, No. 8, 7 – 11 (2011).Google Scholar
  4. 4.
    A. S. Berezhnoi, Multicomponent oxide systems (in Rus.), A. S. Berezhnoi, Naukova dumka, Kiev (1970), 544 p.Google Scholar
  5. 5.
    S. N. Paderin, Theory and calculations of metallurgical systems and processes (in Rus.), Manual for graduate students, S. N. Paderin and V. V. Filippov, MISiS, Moscow (2002), 334 p.Google Scholar
  6. 6.
  7. 7.
  8. 8.

Copyright information

© Springer Science+Business Media, LLC, part of Springer Nature 2019

Authors and Affiliations

  • V. V. Kozlov
    • 1
    Email author
  • A. P. Shevchik
    • 1
  • S. A. Suvorov
    • 1
  • N. V. Arbuzova
    • 1
  • D. V. Kuznetsov
    • 2
  1. 1.Federal State Budgetary Educational Institution of Higher Education“St. Petersburg State Institute of Technology (Technical University)”St. PetersburgRussia
  2. 2.Federal State Autonomous Educational Institution of Higher Education“National Research Technological University “MISiS”MoscowRussia

Personalised recommendations