Advertisement

Reaction Kinetics, Mechanisms and Catalysis

, Volume 128, Issue 1, pp 507–522 | Cite as

Citronellal cyclisation to isopulegol over micro-mesoporous zsm-5 zeolite: effects of desilication temperature on textural and catalytic properties

  • Abdul Karim ShahEmail author
  • Ghulamullah Maitlo
  • Rashid Mustafa Korai
  • Imran Nazir Unar
  • Aqeel Ahmed Shah
  • Hassnain Abbas Khan
  • Syed Farman Ali Shah
  • Usama Ismail
  • Yeung Ho Park
Article
  • 60 Downloads

Abstract

In this work, desilication reassembly post treatment process was applied in synthesis of mesoporous zeolite with stable phase composition and applied it in citronellal cyclisation reaction for the production of isopulegol. The desilication and temperature effects were further investigated on physical and chemical characteristics of zeolite and compared them with catalytic activity. The desilicated zeolite samples have been characterized with the help of N2-adsorption, XRD, ICP-OES, pyridine adsorption and FTIR techniques. Its performance was explored by controlling operative parameters. Experimental outcomes exhibited that desilication of zeolite would led to formation of mesopores inside the stable zeolite framework structures without substantial damage of their internal composition. These changes facilitate mass transfer and catalytic activity with an increase in surface area, mesoporosity, pore size, pore volume, acidity, and Lewis acid sites. Optimum desilication temperature (80 °C) was found as a best for an comprising extra active and selective mesoporous zeolite catalyst for citronellal cyclisation. Thus, this type of zeolite material has shown 100% conversion (e.g. complete conversion of citronellal reactants to the desired products), 95% isopulegol selectivity and highest reaction rate (0.11 min−1). This study exhibits the mesoporous zeolite (MZ-80 °C) as one of the most effective catalyst for citronellal cyclization reaction based on assessment of catalytic performance relative to other commonly available options.

Keywords

Catalytic activity Citronellal cyclisation Desilication re-assembly Desilication temperature Micro-mesoporous zeolite Pore structure 

Notes

Acknowledgements

The authors are deeply thankful to Higher Education Commission Pakistan (HEC), Chemical Engineering department of Dawood University of Engineering and Technology and Fine Chemicals Laboratory Hanyang University South Korea for providing facility to conduct this research. Moreover, we are also grateful to the Hanyang University for providing a laboratory facility and funding support for experimental work.

References

  1. 1.
    Chuah GK, Liu SH, Jaenicke S, Harrison LJ (2001) Cyclisation of citronellal to isopulegol catalysed by hydrous zirconia and other solid acids. J Catal 200:352–359.  https://doi.org/10.1006/jcat.2001.3208 CrossRefGoogle Scholar
  2. 2.
    Trasarti AF, Marchi AJ, Apesteguía CR (2007) Design of catalyst systems for the one-pot synthesis of menthols from citral. J Catal 247:155–165.  https://doi.org/10.1016/j.jcat.2007.01.016 CrossRefGoogle Scholar
  3. 3.
    Yadav GD, Nair JJ (1998) Novelties of eclectically engineered sulfated zirconia and carbon molecular sieve catalysts in cyclisation of citronellal to isopulegol. Chem Commun 21:2369–2370.  https://doi.org/10.1039/A806815A CrossRefGoogle Scholar
  4. 4.
    Mäki-Arvela P, Kumar N, Nieminen V, Sjöholm R, Salmi T, Murzin DY (2004) Cyclization of citronellal over zeolites and mesoporous materials for production of isopulegol. J Catal 225:155–169.  https://doi.org/10.1016/j.jcat.2004.03.043 CrossRefGoogle Scholar
  5. 5.
    Vandichel M, Vermoortele F, Cottenie S, De Vos DE, Waroquier M, Van Speybroeck V (2013) Insight in the activity and diastereoselectivity of various Lewis acid catalysts for the citronellal cyclization. J Catal 305:118–129.  https://doi.org/10.1016/j.jcat.2013.04.017 CrossRefGoogle Scholar
  6. 6.
    da Silva KA, Robles-Dutenhefner PA, Sousa EMB, Kozhevnikova EF, Kozhevnikov IV, Gusevskaya EV (2004) Cyclization of (+)-citronellal to (−)-isopulegol catalyzed by H3PW12O40/SiO2. Catal Commun 5:425–429.  https://doi.org/10.1016/j.catcom.2004.05.001 CrossRefGoogle Scholar
  7. 7.
    Coman SM, Patil P, Wuttke S, Kemnitz E (2009) Cyclisation of citronellal over heterogeneous inorganic fluorides-highly chemo- and diastereoselective catalysts for (±)-isopulegol. Chem Commun 4:460–462.  https://doi.org/10.1039/B817572A CrossRefGoogle Scholar
  8. 8.
    Braga PRS, Costa AA, de Freitas EF, Rocha RO, de Macedo JL, Araujo AS, Dias JA, Dias SCL (2012) Intramolecular cyclization of (+)-citronellal using supported 12-tungstophosphoric acid on MCM-41. J Mol Catal A 358:99–105.  https://doi.org/10.1016/j.molcata.2012.03.002 CrossRefGoogle Scholar
  9. 9.
    Jimeno C, Miras J, Esquena J (2013) TiO2(SiO2)x and ZrO2(SiO2)x cryogels as catalysts for the citronellal cyclization to isopulegol. Catal Lett 143:616–623.  https://doi.org/10.1007/s10562-013-1007-5 CrossRefGoogle Scholar
  10. 10.
    Milina M, Mitchell S, Michels N-L, Kenvin J, Pérez-Ramírez J (2013) Interdependence between porosity, acidity, and catalytic performance in hierarchical ZSM-5 zeolites prepared by post-synthetic modification. J Catal 308:398–407.  https://doi.org/10.1016/j.jcat.2013.08.020 CrossRefGoogle Scholar
  11. 11.
    Perez-Ramirez J, Christensen CH, Egeblad K, Christensen CH, Groen JC (2008) Hierarchical zeolites: enhanced utilisation of microporous crystals in catalysis by advances in materials design. Chem Soc Rev 37:2530–2542.  https://doi.org/10.1039/B809030K CrossRefGoogle Scholar
  12. 12.
    van Donk S, Janssen AH, Bitter JH, de Jong KP (2003) Generation, characterization, and impact of mesopores in zeolite catalysts. Catal Rev 45:297–319.  https://doi.org/10.1081/CR-120023908 CrossRefGoogle Scholar
  13. 13.
    Tosheva L, Valtchev VP (2005) Nanozeolites: synthesis, crystallization mechanism, and applications. Chem Mater 17:2494–2513.  https://doi.org/10.1021/cm047908z CrossRefGoogle Scholar
  14. 14.
    Tao Y, Kanoh H, Abrams L, Kaneko K (2006) Mesopore-modified zeolites: preparation, characterization, and applications. Chem Rev 106:896–910.  https://doi.org/10.1021/cr040204o CrossRefGoogle Scholar
  15. 15.
    Egeblad K, Christensen CH, Kustova M, Christensen CH (2008) Templating mesoporous zeolites. Chem Mater 20:946–960.  https://doi.org/10.1021/cm702224p CrossRefGoogle Scholar
  16. 16.
    Aguado J, Serrano DP, Rodríguez JM (2008) Zeolite beta with hierarchical porosity prepared from organofunctionalized seeds. Microporous Mesoporous Mater 115:504–513.  https://doi.org/10.1016/j.micromeso.2008.02.026 CrossRefGoogle Scholar
  17. 17.
    Schmidt F, Lohe MR, Büchner B, Giordanino F, Bonino F, Kaskel S (2013) Improved catalytic performance of hierarchical ZSM-5 synthesized by desilication with surfactants. Microporous Mesoporous Mater 165:148–157.  https://doi.org/10.1016/j.micromeso.2012.07.045 CrossRefGoogle Scholar
  18. 18.
    Shah AK, Park S, Khan AK, Bhatti UH, Kumar P, Bhutto AW (2018) Citronellal cyclisation over heteropoly acid supported on modified montmorillonite catalyst: effects of acidity and pore structure on catalytic activity. Res Chem Int 44:2405–2423CrossRefGoogle Scholar
  19. 19.
    Brunauer S, Emmett PH, Teller E (1938) Adsorption of gases in multimolecular layers. J Am Chem Soc 60:309–319.  https://doi.org/10.1021/ja01269a023 CrossRefGoogle Scholar
  20. 20.
    Barrett EP, Joyner LG, Halenda PP (1951) The determination of pore volume and area distributions in porous substances. I. computations from nitrogen isotherms. J Am Chem Soc 73:373–380.  https://doi.org/10.1021/ja01145a126 CrossRefGoogle Scholar
  21. 21.
    Emeis CA (1993) Determination of integrated molar extinction coefficients for infrared absorption bands of pyridine adsorbed on solid acid catalysts. J Catal 141:347–354.  https://doi.org/10.1006/jcat.1993.1145 CrossRefGoogle Scholar
  22. 22.
    Zaki MI, Hasan MA, Al-Sagheer FA, Pasupulety L (2001) In situ FTIR spectra of pyridine adsorbed on SiO2–Al2O3, TiO2, ZrO2 and CeO2: general considerations for the identification of acid sites on surfaces of finely divided metal oxides. Colloids Surf A 190:261–274.  https://doi.org/10.1016/S0927-7757(01)00690-2 CrossRefGoogle Scholar
  23. 23.
    Benesi HA (1957) Acidity of catalyst surfaces. II. amine titration using hammett indicators. J Phys Chem 61:970–973.  https://doi.org/10.1021/j150553a030 CrossRefGoogle Scholar
  24. 24.
    Zhang X, Wang R, Yang X (2015) Effect of alkaline treatment on pore structure and acidity of HZSM-5 in the synthesis of ethyl mercaptan. Catal Commun 60:32–36.  https://doi.org/10.1016/j.catcom.2014.11.021 CrossRefGoogle Scholar
  25. 25.
    Kikukawa Y, Yamaguchi S, Nakagawa Y, Uehara K, Uchida S, Yamaguchi K, Mizuno N (2008) Synthesis of a dialuminum-substituted silicotungstate and the diastereoselective cyclization of citronellal derivatives. J Am Chem Soc 130:15872–15878.  https://doi.org/10.1021/ja8014154 CrossRefGoogle Scholar
  26. 26.
    Yongzhong Z, Yuntong N, Jaenicke S, Chuah G-K (2005) Cyclisation of citronellal over zirconium zeolite beta—a highly diastereoselective catalyst to (±)-isopulegol. J Catal 229:404–413.  https://doi.org/10.1016/j.jcat.2004.11.015 CrossRefGoogle Scholar
  27. 27.
    Kumar P, With P, Srivastava VC, Gläser R, Mishra IM (2015) Glycerol carbonate synthesis by hierarchically structured catalysts: catalytic activity and characterization. Ind Eng Chem Res 54:12543–12552.  https://doi.org/10.1021/acs.iecr.5b03644 CrossRefGoogle Scholar

Copyright information

© Akadémiai Kiadó, Budapest, Hungary 2019

Authors and Affiliations

  • Abdul Karim Shah
    • 1
    • 5
    Email author
  • Ghulamullah Maitlo
    • 1
  • Rashid Mustafa Korai
    • 1
  • Imran Nazir Unar
    • 2
  • Aqeel Ahmed Shah
    • 3
  • Hassnain Abbas Khan
    • 4
  • Syed Farman Ali Shah
    • 2
  • Usama Ismail
    • 1
  • Yeung Ho Park
    • 5
  1. 1.Department of Chemical EngineeringDawood University of Engineering and TechnologyKarachiPakistan
  2. 2.Department of Chemical EngineeringMehran University of Engineering and TechnologyJamshoroPakistan
  3. 3.Department of Materials EngineeringNED University of Engineering and TechnologyKarachiPakistan
  4. 4.Department of Chemical EngineeringKing Abdullah University of Science and TechnologyThuwalSaudi Arabia
  5. 5.Department of Fusion Chemical EngineeringHanyang UniversityAnsanSouth Korea

Personalised recommendations