Multiple variables that control the relative levels of successful heritable plant genome editing were addressed using simple case studies in Arabidopsis thaliana.
The recent advent of genome editing technologies (especially CRISPR, Clustered Regularly Interspaced Short Palindromic Repeats) has revolutionized various fields of scientific research. The process is much more specific than previous mutagenic processes and allows for targeting of nearly any gene of interest for the creation of loss-of-function mutations and many other types of editing, including gene-replacement and gene activation. However, not all CRISPR construct designs are successful, due to several factors, including differences in the strength and cell- or tissue-type specificity of the regulatory elements used to express the Cas9 (CRISPR Associated protein 9) DNA nuclease and single guide RNA components, and differences in the relative editing efficiency at different target areas within a given gene. Here we compare the levels of editing created in Arabidopsis thaliana by CRISPR constructs containing either different promoters, or altered target sites with varied levels of guanine–cytosine base content. Additionally, nuclease activity at sites targeted by imperfectly matched single guide RNAs was observed, suggesting that while the primary goal of most CRISPR construct designs is to achieve rapid, robust, heritable gene editing, the formation of unintended mutations at other genomic loci must be carefully monitored.
Deciphering gene function is often a long and difficult process. For decades, the best hope for beginning such a task was the availability of a workable biological system containing a mutation in the gene of interest. Such mutations often create changes in the chemistry, anatomy, or physiology of the organism that help to reveal the gene’s purpose. Certain model systems, such as Escherichia coli, baker’s yeast, Chlamydomonas reinhardtii, Arabidopsis, and maize have proven amenable to production and screening of large mutant populations, which were created through treatment with chemical or biological mutagens, such as UV light, ethylmethane sulfonate (EMS) or foreign DNA (Haughn and Somerville 1986; Shrager et al. 2003). These techniques were powerful, but each treatment generated differing numbers of mutations that were randomly distributed throughout the genome, and often did not generate mutations in every gene. The random nature of the mutagens, combined with the lack of complete mutational coverage (McCourt and Benning 2010; O’Malley and Ecker 2010) often limited the full application of such techniques to small organisms with a short life cycle, and/or those compatible with simple, high-throughput screens. Many agronomic plant species are not susceptible to some of the mutagenic treatments or are logistically incompatible with screening large numbers of randomly mutated lines, thus hampering the collective ability to study gene function in the most useful biological contexts.
Instead of screening whole populations for specific mutations with no guarantee of success, geneticists and biochemists fantasized for decades about the power to create targeted, specific mutations in the gene of choice. Fortunately, the advent of targeted genome editing technologies such as CRISPR-Cas9 recently unleashed the power to do just that. CRISPR genome editing was originally identified in Streptococcus pyogenes (Jinek et al. 2012) and has since been found in many other bacteria and archaea. Three CRISPR systems are known and all are thought to provide mechanisms for innate immunity against viruses, though each contains some unique characteristics. The seminal type II system CRISPR is a relatively simple two-component system containing a nuclease and a single guide RNA (sgRNA) that provides both the target DNA binding and Cas9-interacting domains (Jinek et al. 2012). The sgRNA contains a 20 nucleotide region that is complementary to a target region of the gene of interest. This 20 nucleotide region, called the protospacer, and a three base-pair domain adjacent to it (the protospacer adjacent motif, or PAM, defined by the consensus sequence 5′-NGG-3′) is all that is necessary to specify the sgRNA target site and to direct the nuclease. In the presence of the sgRNA, Cas9 cleaves the bound DNA, inducing a double-stranded break (DSB), which is repaired by the host. The repair process is often imperfect, leading to frameshift-inducing insertions and deletions, forming mutations in the gene of interest.
An ever-more comprehensive set of CRISPR-based genetic tools has been developed over the past few years, and the promise of making a specific mutation in a given gene in bacterial, yeast, plant, animal, or human cells and whole organisms has never been greater. Moving beyond simple gene knockouts, CRISPR technologies have been developed into a large and continuously expanding repertoire of sophisticated tools that can generate other, more complex types of genetic modifications. These include gene replacement (‘gene knock-in’) (Butler et al. 2016), transcriptional activators and repressors (Gilbert et al. 2013; Lowder et al. 2015; Piatek et al. 2015), and ‘base editing’, in which specific target site nucleotide bases are enzymatically interconverted, without the need for DNA strand breakage and repair, thus creating premature stop codons or changes to the amino acid sequence of the encoded protein of the target gene (Zong et al. 2017; Yan et al. 2018; Kumlehn et al. 2018).
All CRISPR experiments, regardless of the organism to be used, face limitations regarding laboratory space, materiel availability, cost, etc. Therefore, the goal of such experiments is to find samples or lines that contain homozygous mutations in the gene of interest, which are established as early in the genetic lineage as possible, are as specific to the gene of interest as possible, all while requiring screening as few initial independent transgenic events as possible.
Given the intellectual critical mass that has been focused on this technology, CRISPR-based gene editing has been applied with impressive effects over the past several years in numerous systems, including bacteria, algae, plants, animals, and human cells, with literally dozens of new publications appearing daily. Despite these impressive accomplishments, the full power of this technology likely has not been fully realized in nearly as many laboratories as possible, for multiple reasons. One is the increasingly overwhelming number of gene and plasmid choices available. Plasmid repositories such as Addgene (https://www.addgene.org/crispr/guide/#overview) and publicly available optimization tools from private laboratories (Lowder et al. 2015; https://chopchop.cbu.uib.no; Labun et al. 2016; https://cfans-pmorrell.oit.umn.edu/CRISPR_Multiplex/vector.php; Čermák et al. 2017) continue to do admirable and extremely important work in trying to provide both the resources for successful gene editing experiments and informed guidance for their use.
Multiple variables must be addressed, including which nuclease enzyme to choose (Cas9 being most common, but including others with different protospacer and PAM sequence requirements) (Steinert et al. 2015; Tang et al. 2017), and which promoters and terminators to use for optimal expression of the Cas nuclease and sgRNA genes. Perhaps most important is sgRNA design, which requires not only examination of which region of the gene of interest to target, but also the type of genetic module to use for production of the sgRNA. Most published studies describing targeted mutagenesis of specific genes may not provide a full reporting of the numbers and types of Cas/sgRNA variations that were tested, logically focusing only on the construct designs that were successful.
Several laboratories have realized the potential utility of user-friendly computer algorithms that could demystify the sgRNA design process (Lei et al. 2014; Labun et al. 2016, 2019; Liang et al. 2016). The persistent variability in specific targeting efficacy, as suggested by the number of publications that continue to address the topic, strongly suggests that sgRNA choice remains the critical variable, and that the goal of ‘fool-proof’ sgRNA design has not yet been achieved (“At the same time, even beautiful gRNAs fail for no clear reason.”—Lukas Dow, Weill Cornell Medicine, in Marx 2018).
Described herein are the results of our efforts to understand the precepts of design and testing of simple yet reasonably effective CRISPR-based plant gene editing plasmid constructs, using straightforward test cases. The results described here may help to simplify some of the decision-making required for setting up CRISPR technology for the first time, thus reaching laboratories that have not yet utilized gene editing techniques. We focused primarily on identification of optimal regulatory elements to drive Cas9 and sgRNA expression leading to heritable mutations, and an analysis of sgRNA efficacy and specificity, through comparisons of protospacer sequence content and targeted sgRNA mutants.
Some promoter types confer rapid gene-editing activity, but not heritable mutations
Key to any successful genetic engineering approach is the use of appropriate regulatory elements to appropriately control the timing, strength, and cell-type specificity of transgene expression. Most early plant CRISPR studies, and many current ones, have relied on two general categories of promoters: RNA polymerase III-specific promoters (such as U3 in monocot species, and U6 in dicots) (Lowder et al. 2015) for expression of the sgRNA molecules, and strong, ubiquitous promoters (often derived from viral or bacterial plant pathogens, Bevan 1984; Gleave 1992) to drive Cas9 expression. The RNA polIII class of promoters can only effectively be used for high-level production of small transcripts, making them a good choice for expression of the sgRNA component, which is typically ~ 100–200 nucleotides in length. However, Cas9 encodes for a large protein (~ 1400 amino acid residues), and therefore must be expressed using other promoters.
Using this arrangement of genetic components, many previous plant CRISPR studies reported high levels of Cas9 activity in vegetative tissues of first generation transgenic plants (Feng et al. 2014; Shan et al. 2018). In the early stages of our work, we also observed similar results. The first test subject was Arabidopsis thaliana E113, a transgenic line engineered to produce ~ 7–8% α-eleostearic acid in its seeds (Dyer et al. 2002; Shockey et al. 2015). The marker for selection of transgenic E113 plants is the DsRed fluorescent protein gene. To test our first generation CRISPR/Cas9 constructs, we re-transformed E113 plants with Agrobacterium tumefaciens expressing three different binary plasmid constructs. Each contained the plant codon-optimized Cas9 gene, flanked by the nos promoter and nos terminator (Gleave 1992; Li et al. 2013). Constructs E642 and E640 also contained sgRNA components targeted to either of two different PAM sites located at nucleotide positions 341 and 422, respectively, in the 678 bp DsRed open reading frame. Plasmid construct E638 contained the Cas9 gene alone, and was used as a negative control. Glufosinate-resistant seedlings were selected for each of the three constructs by growth on soil wetted with herbicide solution, then transferred to untreated soil after the first pair of true leaves had fully expanded. One week after transplanting, the vegetative tissues were viewed through a red filter, with green light illumination. Under these conditions, DsRed-based fluorescence was readily detectable in vegetative tissues of all control E638 plants (Fig. 1b). Vegetative tissue of ~ 67% of E642 plants (Fig. 1d) and ~ 20% of E640 plants (not shown) displayed significant loss of red fluorescence, demonstrating ample proof of concept that the Cas9 protein was expressed at reasonable levels and that active, self-spliced sgRNAs targeting DsRed were produced from the ribozyme-based construct designs (Gao and Zhao 2014). Consistent with previous studies, Cas9 activity and error-prone DNA repair lead to several types of insertion and deletion mutations in the DsRed gene in these plants, as shown in Supplementary Fig. 1.
Other promoters promote better expression in germline cells
Cas9 fused to strong, constitutive promoters can produce some stably inherited mutations in some cases (Feng et al. 2014; Castel et al. 2019). But most often, the mutations generated by CRISPR constructs with this structure are somatic, and thus confined to vegetative tissues, as we observed in Fig. 1. However, as in other past studies (Feng et al. 2014; Shan et al. 2018), the high degree of somatic mutations associated with the loss of T1 vegetative tissue red fluorescence was not reliably transmitted through the germline of these plants. Sixty-four individual glufosinate-resistant T1 plants from each of the three constructs were grown to maturity and seeds harvested. The consistent bright fluorescence levels seen in all 64 samples from the parental E113 line transformed with the negative control E638 construct (lacking a sgRNA element, Supplementary Fig. 2) did not change appreciably in any of the 128 DsRed sgRNA-bearing E640 or E642 T2 seed samples that were analyzed (Supplementary Fig. 3). Some previous studies have demonstrated occasional heritable mutation production via use of strong constitutive promoters (Feng et al. 2014), but these results indicated that the combined use of nos and CaMV35s promoters for expression of Cas9 and sgRNA, elements, respectively, was insufficient for frequent production of heritable mutations at phenotypically obvious scale.
The barrier to generation of heritable mutations at reasonable frequencies likely requires more appropriate timing of expression of the two CRISPR components in germline cells and reproductive tissues. Fortunately, some recent reports have described other promoters that are strongly expressed in egg cells, embryos, pollen, flowers, siliques, and other reproductive cell and tissue types; some of these promoters and other regulatory elements have shown promise in helping to achieve heritable Cas9-derived mutations (An et al. 1996; Wang et al. 2015; Yan et al. 2015; Zhang et al. 2016). However, with notable exceptions (Castel et al. 2019), few direct comparisons of these promoters exist, so accurate assessments of their relative efficacy and consistency may often still be hard to deduce from the literature. We therefore decided to directly compare several possible combinations of regulatory elements, using constructs containing ribozyme-based sgRNA and plant codon-optimized Cas9.
In Fig. 1, we sought to assess the strength of CRISPR activity by a phenotypic screen (inspection for loss of red fluorescence), the visual nature of which greatly reduces the time and effort needed to detect mutations occurring at meaningful levels. Some previous studies have discussed gradual generational increases in levels of Cas activity in transgenic plant lines, eventually leading to robust levels of mutant detection in T3, and later, generations (Morineau et al. 2017). The phenotype-based approach we chose may overlook some ‘slightly active’ designs that gradually generate mutations in T1 and T2 plants, which may lead to a high rate of false negatives. But we felt that the practical demands for detection of ‘early’ mutations at an easily detected scale outweighed these concerns. Given our interest in seed lipid metabolism, in the following experiments we developed a similarly rapid and facile system for detection of heritable mutations generated at a scale sufficient for alteration of total seed fatty acid composition. The CL37 line of A. thaliana produces unusual hydroxylated HFA in seed lipids, due to stable overexpression of the castor bean fatty acid hydroxylase gene FAH12 (Lu et al. 2006). CL37 plants were transformed with a series of nine A. tumefaciens strains expressing a binary plasmid construct containing modules for Cas9 and an sgRNA targeting PAM position 333 of FAH12, each fused to a distinct combination of the YAO promoter (Yan et al. 2015), AtACT8 promoter (An et al. 1996), EC1.2p-enhanced EC1.1 promoter (Wang et al. 2015), or AtUBQ10 promoter (Zhang et al. 2016). To avoid any bias towards selection of somatic mutations, at least 6–8 transgenic T1 seeds were selected randomly, and grown to maturity, but not analyzed in more detail. Segregating T2 seed samples were harvested from each parental T1 plant and total seed fatty acid composition was determined by separation and quantification of fatty acid methyl esters by gas chromatography (GC). Any significant changes to T2 seed HFA content, relative to parental CL37 controls, would represent FAH12 mutations generated during the progression through the T1 generation and during T2 seed development, including those events that were heritably transmitted from the T1 mother plants to T2 seeds.
Control CL37 plants produced ~ 20% HFA, whereas eight of the nine sgRNA/Cas9 combinations generated statistically significant reductions in average seed HFA content (unpaired Student’s t test, p values ranging from < 0.0001 to 0.0202) (Fig. 2). Two constructs were most effective: plasmid E719 (UBQ10p:sgRNA + ACT8p:Cas9) and plasmid E720 (UBQ10p:sgRNA + YAOp:Cas9), with most or all T2 seed samples containing less HFA than even the lowest CL37 control sample. E720 was particularly effective; the average HFA value for the set of 38 independent transgenic events was approximately half of the CL37 control average, with several lines reduced to < 5% HFA. Two lines contained only trace amounts of HFA (< 1%), representing near-homozygous FAH12 gene knockout in a single generation. The reduction in HFA content could be directly linked to FAH12 sequence alterations; representative copies of the gene showed typical types of insertions and deletions near the target site (Supplementary Fig. 4). Many of the mutations created in this line were also heritable, not solely the result of mutations generated anew in the T2 seeds. This was shown by planting multiple brown seeds from the segregating T2 seed pool to generate ‘non-transgenic’ lines lacking the sgRNA/Cas9 T-DNA and its associated red fluorescence. All four lines examined lost HFA production in the resulting T3 seeds (Fig. 3b) while maintaining a homozygous mutant edited allele of the RcFAH12 transgene (Fig. 3c). Six other E720 T2 lines containing strong seed HFA reductions (circled in Fig. 3a) showed similar outcomes (Supplementary Fig. 5). In all, five of the seven lines tested produced T3 seeds containing heritable gene editing events that resulted in homozygous FAH12 mutant, Cas9-free status. Many of the other individuals in these data sets contained reduced levels of HFAs, relative to CL37 parental samples (< 17–20%), indicating lower levels of gene editing, but which could potentially result in a similar ‘finished line’ genetic status in T4 or later generations.
Protospacer GC content alone is not predictive for gene editing efficiency
Protospacer GC nucleotide content often has also been addressed as an important aspect of sgRNA performance in various systems (Ren et al. 2014), including in plants (Morineau et al. 2017). We generated other CRISPR constructs that target different target sites in RcFAH12 containing different GC content. The 20-bp protospacer preceding PAM333 targeted in Fig. 2 is 55% GC, while the two additional protospacers which target PAMs 540 and 885, contain 45% and 60% GC content, respectively. The specific sequences of the different FAH12 protospacers and associated PAMs are shown in Supplementary Table 1. GC analysis of T2 seed samples produced from randomly chosen T1 plants revealed a range of HFA contents, which are compared in Fig. 4 to the parental CL37 and initial PAM333 data from Fig. 2. On average, the construct targeting PAM540 was nearly as effective as PAM333, with several lines containing < 10% HFA, although none < 3%. Conversely, the construct targeting PAM885 showed significantly less activity overall, with most individual samples containing only slight reductions in HFA content relative to the CL37 controls. We were also interested to study the effects of stacking together multiple sgRNAs targeting different sites within the same gene. The seed fatty acid profiles derived from lines combining the PAM885 sgRNA with PAMs 333 or 540 did not contain additional HFA reductions on average compared to the lines expressing single sgRNAs for PAM333 and PAM540, likely reflecting the relatively less effective activity conferred by the sgRNA targeting PAM885. However, more than half of the lines expressing the combination of sgRNAs for PAM333 and PAM540 had seed lipid profiles containing < 2% HFA, suggesting an additive gene editing effect when targeting multiple sites within the same gene (Fig. 4).
Imperfect protospacer matches can still result in Cas9 activity
An sgRNA molecule carrying 20-bp protospacer that targets a DNA sequence, immediately adjacent to an 5′-NGG-3′ PAM sequence, should be exceptionally specific (theoretically occurring at random once every ~ 1.76 × 1013 bp). Yet, depending on the processes used to search for it, the degree of ‘off-site’ or ‘off-target’ Cas9 activity varies considerably from study to study (Feng et al. 2014; Tang et al. 2016; Zhang et al. 2018). Given the important implications of this effect, we sought to test for artificially induced off-target activity using the original FAH12 PAM333 plasmid construct, by modifying it to contain a series of ten different single base-pair mismatches in the protospacer region, beginning at − 2 (two bp from the 3′ end of the 20 bp protospacer, proximal to the PAM sequence), and ending at position − 20 (distal to the PAM). A complete listing of the different protospacer sequences is shown in Table 1. As in previous experiments, CL37 plants were re-transformed with this series of constructs, followed by sowing of randomly chosen transgenic T1 seeds, harvesting of seeds from T1 plants, and analysis of T2 seed lipid HFA content by GC.
As shown in Fig. 5, the control CL37 plants grown for this experiment ranged between 18 and 26% with an average of ~ 21% HFA. The m4 construct produced a dataset that was significantly different than the CL37 controls (Student t test, p = 0.0006), but in this case, the average HFA value was higher than the controls. All other mutant protospacer constructs produced lines with seed HFA levels that were statistically indistinguishable from the controls, on average. However, each mutant series produced at least a few individual lines with seed HFA levels below the range of values in the CL37 controls (Fig. 5).
We tested the genomic DNA present in these low-HFA seed samples for CRISPR modifications at the target site in the FAH12 gene. Samples of genomic DNA were isolated from pooled T2 seedlings derived from at least one reduced-HFA line from each of the m2 through m20 sgRNA protospacer mutant series shown in Fig. 5. Samples were digested with BstXI, then 10 ng of restricted DNA was used as template for FAH12 PCR. These amplicons were again digested with BstXI, then analyzed by agarose gel electrophoresis. BstXI was used here due to proximity of a restriction site near PAM333 (Supplementary Fig. 4). Unmodified plants were included as negative controls, while samples from < 1% HFA E720 lines (shown in Fig. 2) were included as editing-positive controls (Fig. 6). Some BstXI sites in the genomic samples were not cleaved during the pre-treatment step, as indicated that unedited, BstXI-sensitive FAH12 templates from control plants and the m2 through m10 protospacer mutant lines containing the lowest HFA values survived the enzymatic pre-treatment, thus generating FAH12 amplicons that were completely or substantially digested by the second BstXI treatment (Fig. 6a, all lanes; Fig. 6b, lanes 14–19). These data suggest that few if any mutations had occurred in or had been transmitted to the seed tissues of the m2, m4, m6, m8, or m10 lines contained near-normal HFA levels and that the modest variances in HFA content in these samples, relative to CL37 controls, arose through typical biological variability.
However, seeds from plants expressing sgRNAs containing protospacers with increasingly PAM-distal mismatches (e.g. m12 through m20) showed a general downward trend in average HFA levels and individual samples with progressively larger decreases. The apparent tolerance for mismatches between sgRNA and target DNA increases beginning at positions − 12/− 14, and the relative drop in HFA production correlated well with the levels of BstXI-resistant FAH12 DNA that survived the enzymatic pre-treatment (see increased ratio of BstXI resistant/BstXI-sensitive PCR digestion, Fig. 6b, lanes 20–28, and all lanes in Fig. 6c). These data indicate that perfect pairing of sgRNA to target site DNA is not an absolute requirement to achieve occasional gene editing events in plant cells, thus emphasizing the need to design sgRNAs carefully, and to remain aware of potential ‘off-target’ activity.
Finally, we tested the efficacy of the UBQ10p:sgRNA + YAOp:Cas9 plasmid binary architecture to re-address the failed ability to create transmissible gene editing events in the DsRed transgene in Arabidopsis E113 seeds, as discussed above (Fig. 1 and Supplementary Figs. 2 and 3). The DsRed sgRNA targeted to position 422 (used in construct E642, Fig. 1) was transferred to the UBQ10p-based sgRNA module and combined into the YAOp:Cas9 binary plasmid construct, and transformed into Arabidopsis E113. T1 seedlings were selected for glufosinate resistance, and grown to maturity. T2 seeds were harvested from multiple lines for each construct and inspected visually. Control construct E716, lacking a sgRNA element, continued to produce uniform red fluorescence patterns (Supplementary Fig. 6). However, unlike the plasmid designs containing nos/CaMV35S promoters, the UBQ10p:DsRedsgRNA/YAOp:Cas9 combination in construct E767 demonstrated high levels of activity in reproductive tissues. T2 seed samples harvested from 28 independent transgenic events revealed 8 lines that contained seeds with visually obvious levels of red fluorescence depletion. The levels of seeds edited at scale varied from 1.4 to 69.8%, with an average of 28%. Figure 7 shows examples of the fluorescence patterns of samples containing low (Fig. 7c), moderate (Fig. 7f), and high (Fig. 7i) levels of DsRed gene editing.
CRISPR technology has provided avenues for engineering of cells, tissues, and whole organisms across the biological spectrum. Aside from the amazing potential for gene editing as a diagnostic tool and perhaps even a treatment for many debilitating diseases (Ortiz-Virumbrales et al. 2017; Reczek et al. 2017; Zabinyakov et al. 2017), the potential possible uses of this technology in plants and livestock animals is similarly impressive (Lamas-Toranzo et al. 2017). Creation of disease-resistant and less allergenic food crops (Hummel et al. 2018; García-Molina et al. 2019) with enhanced nutrient profiles (Wang et al. 2019) is now within our reach; the future implications for feeding a progressively larger world population are immense.
Many research groups around the world have developed extensive gene editing toolkits. We are not seeking to ‘compete’ in this regard, in fact, we will likely utilize some of the resources developed by these research groups (Lowder et al. 2015; Čermák et al. 2017; Castel et al. 2019) in the future. We simply have tried to address some of the important criteria, such as regulatory element choice, and consideration of how sgRNA design affects both ‘on-target’ and ‘off-target’ gene editing, that must be considered before adopting this new technology. These topics are often not described in detail in studies of individual edited genes, or are presented as small additions to complex analyses of large data sets, or are referred to abstractly as data points used to build predictive computer algorithms. Here we established facile phenotypic screens that were used to evaluate different variables in the CRISPR design process using simple, easily screened test cases. It is our hope that other research teams may be able to apply these principles to their genes of interest, and CRISPR strategies to edit them, as well.
Many existing CRISPR studies in plants have made use of the RNA polymerase III class of promoters for expression of the sgRNA component. While often very successful, this type of promoter has some limitations, including specific sequence contexts that must be maintained at the 5′ end of the transcript (Gao et al. 2017), and the length of transcripts that can be produced. Our future plans for applying CRISPR technology to oilseed engineering dictates that we will likely need to simultaneously edit multiple genes. Lowder et al. (2015) established a system that allows for packaging multiple RNApolIII promoter:sgRNA units together in series, but the sgRNA transcript sequence limitations (Gao et al. 2017) still remain. Gao and Zhao (2014) utilized the ability of certain ribozyme RNA sequences to self-splice to create new sgRNA production modules. This approach, along with other RNA processing-related approaches (Xie et al. 2015; Čermák et al. 2017), makes possible the expression of several different sgRNAs from one plasmid, using any RNA polymerase type II promoter. Our constructs rely on production of mature sgRNAs from expression modules containing the specific sgRNA sequence flanked on the 5′ and 3′ sides by hammerhead and HDV ribozymes (Table 2).
Expression of nos promoter-driven plant codon-optimized SpCas9 with either of two different sgRNAs expressed behind the CaMV35s promoter (Bevan 1984; Gleave 1992) both effectively targeted the DsRed selectable marker gene in a transgenic Arabidopsis line (Fig. 1). This result was encouraging as a proof of concept, and seemed to suggest that the ribozyme-based sgRNA design works effectively, in contrast to the relatively poor performance of ribozyme sgRNA reported recently (Čermák et al. 2017). The use of strong plant pathogen-derived promoters such as CaMV35s might be ideal for single-generation studies of gene editing effects in vegetative tissues. But as in previous studies (Shan et al. 2018) the strong editing activity from these designs did not result in meaningful numbers of heritable mutations, thus precluding the continued use of this set of regulatory elements in our future studies.
To fully exploit the utility of gene editing as an oilseed metabolic engineering tool, we conducted direct comparisons of promising promoters that could act in reproductive cells and tissue types, to generate heritable mutations. A few candidate promoters had been previously described and characterized in some detail (Wang et al. 2015; Yan et al. 2015; Zhang et al. 2016). We cloned these and other promoters and used them to assess their relative abilities to create heritable mutations leading to reduced HFA production in T2 generation Arabidopsis CL37 seeds (Lu et al. 2006) via editing of the RcFAH12 fatty acid hydroxylase gene. In addition, we also tested the Arabidopsis actin8 (AtACT8) promoter (An et al. 1996), which we previously confirmed is expressed at high levels in Arabidopsis flowers and developing seeds (Shockey et al. 2003). As shown in Fig. 2, most of the different combinations of promoters fused to Cas9 and sgRNA did effect slight, but statistically meaningful, reductions in T2 seed HFA levels. In our system, the enhanced egg cell-specific promoter (EC1.2en-EC1.1p) did not produce highly significant HFA reductions in T2 seeds, unlike the reported ability of this promoter to drive high mutation rates in other genes in the first generation (Wang et al. 2015). The cause of this discrepancy is not known. This promoter (and rbcS terminator) used here is the same as that contained in construct pHEE2E-TRI, which demonstrated high activity against other Arabidopsis genes (Wang et al. 2015). One or two copies of this promoter were included in five of the nine different binary constructs tested in Fig. 2; four of these five did show slight but statistically significant decreases in seed HFA content relative to CL37 controls. It is very possible that some of the individual lines chosen from these populations could produce higher levels of heritable gene editing events in T3 or later generation seed samples.
Čermák et al. (2017) have presented compelling evidence that ribozyme-based sgRNA processing is not as effective as some other sgRNA production methods, such as those that rely on the transfer RNA processing enzymes. We have not directly compared the tRNA system to the ribozyme system employed here, but our data (Fig. 2) seemed fairly robust, so we continued to employ the ribozyme design.
Only two combinations led to individual samples containing < 15 weight% HFA levels, which would represent loss-of-function mutations in at least ~ 25% of oil-producing T2 seed cells. Both highly active constructs contained sgRNA expressed behind the Arabidopsis ubiquitin 10 (AtUBQ10) promoter (Zhang et al. 2016), combined with Cas9 expression driven by either the AtACT8 promoter (construct E719) (An et al. 1996) or the YAO promoter (construct E720) (Yan et al. 2015). Construct E720 was highly active, producing many lines that contained strong reductions in HFA content, including two that approached near-saturation of FAH12 editing (as evidenced by only trace amounts of HFA remaining in segregating T2 seeds). These data also confirm the findings from Fig. 1 that the ribozyme-based sgRNA production process is reasonably efficient and rapid, but improves upon the results shown in Fig. 1 in that many of the mutations produced are heritable, and can results in significant numbers of homozygous edited non-transgenic lines as early as the T2 and T3 generations (Fig. 3, Supplementary Fig. 5). The results also show that the AtACT8 promoter, which had not been analyzed in previously reported plant CRISPR studies, can be an effective element in future gene editing strategies as well.
The complex set of factors that control sgRNA targeting efficiency remain a vexing problem. Previous studies have identified certain sequence elements within the protospacer that may influence Cas9 biochemical outcomes. Many reveal the importance of protospacer GC content generally, as a component of sgRNA melting temperature, but also in specific regions of the protospacer. These include guanine at position − 1 relative to the PAM (Wong et al. 2015) and overall GC content in PAM-proximal and PAM-distal sections of the protospacer (Labuhn et al. 2018). Based on guidance derived by Ren et al. (2014), Morineau et al. (2017) achieved successful gene-editing in Camelina sativa with protospacer sequences that include guanine or cytosine in at least 5 of the 6 bp proximal to the PAM. Yet, in Fig. 4, we show that sgRNAs targeted to RcFAH12 PAM885, which contains the highest overall protospacer GC content (and 5 of 6 guanines or cytosines from positions − 6 to − 1, including G at position − 1), was much less efficient than PAM 333 (which contains − 1G but only 2 of 6 guanine-cytosines from − 6 to − 1) or PAM540, which contained the lowest overall protospacer GC content and contained a cytosine at position − 1, not a guanine. These results suggest that much work remains to be done to develop reliable sgRNA design prediction algorithms, and that most research groups should still plan to test multiple potential target sites in their genes of interest when initiating new CRISPR studies.
The other serious concern regarding CRISPR technology is the risk of ‘off-target’ activity in genes not specified by the designated sgRNAs. Our results confirm findings presented in many other past studies that the ‘seed region’ (the 10–12 bp proximal to the PAM) confers the majority of specificity to sgRNA binding and Cas9 recruitment (Wilson et al. 2018), given the absence of meaningful mutation rates in CL37 lines transformed with sgRNAs containing target sites mismatches in the PAM-proximal half of the protospacer (Fig. 5, m2 through m10). However, at-scale mutations did begin to appear with increasing frequency when analyzing the effects of sgRNA constructs containing mismatches at increasing distances from the PAM (Fig. 5, m12 through m20). How much of a problem is off-site editing? Extant results, both here and in previous studies, suggest that the specificity of CRISPR-Cas9 based gene editing can be somewhat flexible, at least in some cases. In this sense, the power of gene editing technology may create risks, but the ability to manipulate this flexibility may also present opportunities. Generally speaking, Cas9 nuclease activity is only directed to intended target sites specified by the protospacer region of the sgRNA. Given the massive proliferation of sequenced genomes throughout all branches of the tree of life in recent years, it is increasingly easy to perform checks of any candidate protospacer sequence against all possible intended and closely related unintended targets. Yet, in some cases, researchers may wish to target more than one closely related gene for editing. Nearly 17% of all Arabidopsis thaliana genes exist as related orthologs in closely linked tandem arrays (The Arabidopsis Genome Initiative 2000) and many genes in practically all other sequenced plant genomes are also part of large gene families distributed across syntenic chromosomal regions that arose during evolution (Shockey and Browse 2011). Creation of lines containing mutations in multiple genes via the use of intentionally promiscuous sgRNA constructs may be an attractive approach for some researchers, especially in cases where functional overlap between related genes masks the effects of mutations in a single member of a gene family.
In summary, we have presented here the results of a series of experiments designed to reveal which promoter elements and sgRNA design criteria may help to achieve stable, heritable mutations in Arabidopsis and related plant species, accompanied by analyses that provide an estimate of how often off-target mutations might occur. These tools are freely available to the public and can be easily combined with other existing resources (Shockey et al. 2015) to combine gene editing with transgene overexpression and/or partial silencing of endogenous genes.
Gene cloning and plasmid construction
The makeup of the basic set of cloning vector and plant transformation binary plasmids has been described previously (Shockey et al. 2015). A plasmid bearing the open reading frame for epitope-tagged, plant codon-optimized Staphylococcus aureus Cas9 was generously provided by Dr. Jen Sheen (Harvard Medical School) (Li et al. 2013). The DNA templates for sgRNA production utilized the self-cleaving ribozyme ‘Ribozyme-Guide RNA-Ribozyme’ (RGR) design (Gao and Zhao 2014). The sequence for the representative RcFAH12 PAM333 construct is described in Table 1. Synthetic versions of the promoters used in this study were purchased commercially (see Supplementary Table 2 for sequences), based on the sequences reported by the specific authors who first described them. These were cloned into existing cloning vectors (Shockey et al. 2015) to replace the existing promoters. Single-guide RNA genes were either purchased commercially, or adapted to modify existing target sequences by mutagenesis PCR. Multiple RGR sgRNAs were combined in series by generating restriction-digested sgRNA units that had been PCR-amplified with nucleotide primers containing unique BstXI restriction sites at the appropriate internal junctions, and NotI or SacII sites at the extreme 5′ and 3′ ends, respectively. Purified digested single or pooled sgRNA cassettes were ligated into the cloning vectors K34 or K63, and the resulting promoter:sgRNA:terminator cassettes were combined with similarly prepared Cas9 expression cassettes for ligation into plant binary plasmids B9 or B110 using simple restriction digestion and T4 DNA ligase-based molecular techniques (Shockey et al. 2015). All paired sgRNA and Cas9 expression modules were constructed in the head-to-head divergent orientation to maximize transcription of both elements (Castel et al. 2019). Complete plasmid maps of all constructs described in this study are available upon request.
Plant growth and transformation
Most of the studies described here utilized Arabidopsis thaliana CL37 (Lu et al. 2006). CL37 is derived from the fae1 mutant, which is defective in 18-carbon fatty acid elongation (Kunst et al. 1992), and overexpresses the Ricinus communis FAH12 oleate hydroxylase gene (van de Loo et al. 1995) in its seeds. All binary plasmids were prepared using standard molecular biology cloning techniques and electroporated into transformation-competent Agrobacterium tumefaciens strain C58-C1, then transformed into Arabidopsis using the floral dip procedure (Clough and Bent 1998).
Seed lipid analysis
Fatty acid methyl esters (FAMEs) were produced from intact seeds, by incubating ~ 20–50 mg of seeds in 1.5 ml of 5% sulfuric acid in methanol at 85–90 ℃ for 60–90 min. The reactions were quenched with 1.5 ml of saturated NaCl solution, and mixed with 400–800 μl of hexane, followed by vigorous mixing and centrifugation at 2500×g for 5 min. Hexane fractions from clarified samples were analyzed for resolution of all FAMEs, including those from hydroxy fatty acids (HFAs), by GC as previously described (Shockey et al. 2019).
An YQ, McDowell JM, Huang S, McKinney EC, Chambliss S, Meagher RB (1996) Strong, constitutive expression of the Arabidopsis ACT2/ACT8 actin subclass in vegetative tissues. Plant J 10:107–121
Bevan M (1984) Binary Agrobacterium vectors for plant transformation. Nucleic Acids Res 12:8711–8721
Butler NM, Baltes NJ, Voytas DF, Douches DS (2016) Geminivirus-mediated genome editing in potato (Solanum tuberosum L.) using sequence-specific nucleases. Front Plant Sci 7:1045. https://doi.org/10.3389/fpls.2016.01045
Castel B, Tomlinson L, Locci F, Yang Y, Jones JDG (2019) Optimization of T-DNA architecture for Cas9-mediated mutagenesis in Arabidopsis. PLoS ONE 14:e0204778. https://doi.org/10.1371/journal.pone.0204778
Čermák T, Curtin SJ, Gil-Humanes J, Čegan R, Kono TJY, Konečná E, Belanto JJ, Starker CG, Mathre JW, Greenstein RL, Voytas DF (2017) A multipurpose toolkit to enable advanced genome engineering in plants. Plant Cell 29:1196–1217. https://doi.org/10.1105/tpc.16.00922
Clough SJ, Bent AF (1998) Floral dip: a simplified method for Agrobacterium-mediated transformation of Arabidopsis thaliana. Plant J 16:735–743
Dyer JM, Chapital DC, Kuan J-C, Mullen RT, Turner C, McKeon TA, Pepperman AB (2002) Molecular analysis of a bifunctional fatty acid conjugase/desaturase from tung. Implications for the evolution of plant fatty acid diversity. Plant Physiol 130:2027–2038
Feng Z, Mao Y, Xu N, Zhang B, Wei P, Yang DL, Wang Z, Zhang Z, Zheng R, Yang L, Zeng L, Liu X, Zhu JK (2014) Multigeneration analysis reveals the inheritance, specificity, and patterns of CRISPR/Cas-induced gene modifications in Arabidopsis. Proc Natl Acad Sci USA 111:4632–4637. https://doi.org/10.1073/pnas.1400822111
Gao Y, Zhao Y (2014) Self-processing of ribozyme-flanked RNAs into guide RNAs in vitro and in vivo for CRISPR-mediated genome editing. J Integr Plant Biol 56:343–349. https://doi.org/10.1111/jipb.12152
Gao Z, Harwig A, Berkhout B, Herrera-Carrillo E (2017) Mutation of nucleotides around the +1 position of type 3 polymerase III promoters: the effect on transcriptional activity and start site usage. Transcription 8:275–287. https://doi.org/10.1080/21541264.2017.1322170
García-Molina MD, Giménez MJ, Sánchez-León S, Barro F (2019) Gluten free wheat: are we there? Nutrients 11:E487. https://doi.org/10.3390/nu11030487
Gilbert LA, Larson MH, Morsut L, Liu Z, Brar GA, Torres SE, Stern-Ginossar N, Brandman O, Whitehead EH, Doudna JA, Lim WA, Weissman JS, Qi LS (2013) CRISPR-mediated modular RNA-guided regulation of transcription in eukaryotes. Cell 154:442–451. https://doi.org/10.1016/j.cell.2013.06.044
Gleave AP (1992) A versatile binary vector system with a T-DNA organisational structure conducive to efficient integration of cloned DNA into the plant genome. Plant Mol Biol 20:1203–1207
Haughn G, Somerville CR (1986) Sulfonylurea-resistant mutants of Arabidopsis. Mol Gen Genet 204:430–434
Hummel AW, Chauhan RD, Čermák T, Mutka AM, Vijayaraghavan A, Boyher A, Starker CG, Bart R, Voytas DF, Taylor NJ (2018) Allele exchange at the EPSPS locus confers glyphosate tolerance in cassava. Plant Biotechnol J 16:1275–1282. https://doi.org/10.1111/pbi.12868
Jinek M, Chylinski K, Fonfara I, Hauer M, Doudna JA, Charpentier E (2012) A programmable dual-RNA-guided DNA endonuclease in adaptive bacterial immunity. Science 337:816–821. https://doi.org/10.1126/science.1225829
Kumlehn J, Pietralla J, Hensel G, Pacher M, Puchta H (2018) The CRISPR/Cas revolution continues: from efficient gene editing for crop breeding to plant synthetic biology. J Integr Plant Biol 60:1127–1153. https://doi.org/10.1111/jipb.12734
Kunst L, Taylor DC, Underhill EW (1992) Fatty acid elongation in developing seed of Arabidopsis thaliana. Plant Physiol Biochem 30:425–434
Labuhn M, Adams FF, Ng M, Knoess S, Schambach A, Charpentier EM, Schwarzer A, Mateo JL, Klusmann JH, Heckl D (2018) Refined sgRNA efficacy prediction improves large- and small-scale CRISPR-Cas9 applications. Nucleic Acids Res 46:1375–1385. https://doi.org/10.1093/nar/gkx1268
Labun K, Montague TG, Gagnon JA, Thyme SB, Valen E (2016) CHOPCHOP v2: a web tool for the next generation of CRISPR genome engineering. Nucleic Acids Res 44(W1):W272–W276. https://doi.org/10.1093/nar/gkw398
Labun K, Montague TG, Krause M, Torres Cleuren YN, Tjeldnes H, Valen E (2019) CHOPCHOP v3: expanding the CRISPR web toolbox beyond genome editing. Nucleic Acids Res 47(W1):W171–W174. https://doi.org/10.1093/nar/gkz365
Lamas-Toranzo I, Guerrero-Sánchez J, Miralles-Bover H, Alegre-Cid G, Pericuesta E, Bermejo-Álvarez P (2017) CRISPR is knocking on barn door. Reprod Domest Anim 52(Suppl 4):39–47. https://doi.org/10.1111/rda.13047
Lei Y, Lu L, Liu HY, Li S, Xing F, Chen LL (2014) CRISPR-P: a web tool for synthetic single-guide RNA design of CRISPR-system in plants. Mol Plant 7:1494–1496. https://doi.org/10.1093/mp/ssu044
Li JF, Norville JE, Aach J, McCormack M, Zhang D, Bush J, Church GM, Sheen J (2013) Multiplex and homologous recombination-mediated genome editing in Arabidopsis and Nicotiana benthamiana using guide RNA and Cas9. Nat Biotechnol 31:688–691. https://doi.org/10.1038/nbt.2654
Liang G, Zhang H, Lou D, Yu D (2016) Selection of highly efficient sgRNAs for CRISPR/Cas9-based plant genome editing. Sci Rep 6:21451. https://doi.org/10.1038/srep21451
Lowder LG, Zhang D, Baltes NJ, Paul JW, Tang X, Zheng X, Voytas DF, Hsieh T, Zhang Y, Qi Y (2015) A CRISPR/Cas9 toolbox for multiplexed plant genome editing and transcriptional regulation. Plant Physiol 169:971–985. https://doi.org/10.1104/pp.15.00636
Lu CF, Fulda M, Wallis JG, Browse J (2006) A high-throughput screen for genes from castor that boost hydroxy fatty acid accumulation in seed oils of transgenic Arabidopsis. Plant J 45:847–856
Marx V (2018) Base editing a CRISPR way. Nat Methods 15:767–770
McCourt P, Benning C (2010) Arabidopsis: a rich harvest 10 years after completion of the genome sequence. Plant J 61:905–908. https://doi.org/10.1111/j.1365-313X.2010.04176.x
Morineau C, Bellec Y, Tellier F, Gissot L, Kelemen Z, Noguè F, Faure JD (2017) Selective gene dosage by CRISPR-Cas9 genome editing in hexaploid Camelina sativa. Plant Biotechnol J 15:729–739. https://doi.org/10.1111/pbi.12671
O’Malley RC, Ecker JR (2010) Linking genotype to phenotype using the Arabidopsis unimutant collection. Plant J 61:928–940. https://doi.org/10.1111/j.1365-313X.2010.04119.x
Ortiz-Virumbrales M, Moreno CL, Kruglikov I, Marazuela P, Sproul A, Jacob S, Zimmer M, Paull D, Zhang B, Schadt EE, Ehrlich ME, Tanzi RE, Arancio O, Noggle S, Gandy S (2017) CRISPR/Cas9-Correctable mutation-related molecular and physiological phenotypes in iPSC-derived Alzheimer's PSEN2 (N141I) neurons. Acta Neuropathol Commun 27:77. https://doi.org/10.1186/s40478-017-0475-z
Piatek A, Ali Z, Baazim H, Li L, Abulfaraj A, Al-Shareef S, Aouida M, Mahfouz MM (2015) RNA-guided transcriptional regulation in planta via synthetic dCas9-based transcription factors. Plant Biotechnol J 13:578–589. https://doi.org/10.1111/pbi.12284
Reczek CR, Birsoy K, Kong H, Martínez-Reyes I, Wang T, Gao P, Sabatini DM, Chandel NS (2017) A CRISPR screen identifies a pathway required for paraquat-induced cell death. Nat Chem Biol 13:1274–1279. https://doi.org/10.1038/nchembio.2499
Ren X, Yang Z, Xu J, Sun J, Mao D, Hu Y, Yang S-J, Qiao HH, Wang X, Hu Q, Deng P, Liu LP, Ji JY, Li JB, Ni JQ (2014) Enhanced specificity and efficiency of the CRISPR/Cas9 system with optimized sgRNA parameters in Drosophila. Cell Rep 9:1151–1162. https://doi.org/10.1016/j.celrep.2014.09.044
Shan Q, Baltes NJ, Atkins P, Kirkland ER, Zhang Y, Baller JA, Lowder LG, Malzahn AA, Haugner JC 3rd, Seelig B, Voytas DF, Qi Y (2018) ZFN, TALEN and CRISPR-Cas9 mediated homology directed gene insertion in Arabidopsis: a disconnect between somatic and germinal cells. J Genet Genom 45:681–684. https://doi.org/10.1016/j.jgg.2018.07.011
Shockey J, Browse J (2011) Genome-level and biochemical diversity of the acyl-activating enzyme superfamily in plants. Plant J 66:143–160. https://doi.org/10.1111/j.1365-313X.2011.04512.x
Shockey JM, Fulda MS, Browse J (2003) Arabidopsis contains a large superfamily of acyl-activating enzymes. Phylogenetic and biochemical analysis reveals a new class of acyl-coenzyme A synthetases. Plant Physiol 132:1065–1076
Shockey J, Mason C, Gilbert M, Cao H, Li X, Cahoon E, Dyer J (2015) Development and analysis of a highly flexible multi-gene expression system for metabolic engineering in Arabidopsis seeds and other plant tissues. Plant Mol Biol 89:113–126. https://doi.org/10.1007/s11103-015-0355-5
Shockey J, Lager I, Stymne S, Kotapati HK, Sheffield J, Mason C, Bates PD (2019) Specialized lysophosphatidic acid acyltransferases contribute to unusual fatty acid accumulation in exotic Euphorbiaceae seed oils. Planta 249:1285–1299. https://doi.org/10.1007/s00425-018-03086-y
Shrager J, Hauser C, Chang CW, Harris EH, Davies J, McDermott J, Tamse R, Zhang Z, Grossman AR (2003) Chlamydomonas reinhardtii genome project. A guide to the generation and use of the cDNA information. Plant Physiol 131:401–408
Steinert J, Schiml S, Fauser F, Puchta H (2015) Highly efficient heritable plant genome engineering using Cas9 orthologues from Streptococcus thermophilus and Staphylococcus aureus. Plant J 84:1295–1305. https://doi.org/10.1111/tpj.13078
Tang X, Zheng X, Qi Y, Zhang D, Cheng Y, Tang A, Voytas DF, Zhang Y (2016) A single transcript CRISPR-Cas9 system for efficient genome editing in plants. Mol Plant 9:1088–1091. https://doi.org/10.1016/j.molp.2016.05.001
Tang X, Lowder LG, Zhang T, Malzahn AA, Zheng X, Voytas DF, Zhong Z, Chen Y, Ren Q, Li Q, Kirkland ER, Zhang Y, Qi Y (2017) A CRISPR-Cpf1 system for efficient genome editing and transcriptional repression in plants. Nat Plants 3:17018. https://doi.org/10.1038/nplants.2017.18
The Arabidopsis Genome Initiative (2000) Analysis of the genome sequence of the flowering plant Arabidopsis thaliana. Nature 408:796–815
van de Loo FJ, Broun P, Turner S, Somerville C (1995) An oleate 12-hydroxylase from Ricinus communis L. is a fatty acyl desaturase homolog. Proc Natl Acad Sci USA 92:6743–6747
Wang ZP, Xing HL, Dong L, Zhang HY, Han CY, Wang XC, Chen QJ (2015) Egg cell-specific promoter-controlled CRISPR/Cas9 efficiently generates homozygous mutants for multiple target genes in Arabidopsis in a single generation. Genome Biol 16:144. https://doi.org/10.1186/s13059-015-0715-0
Wang T, Zhang H, Zhu H (2019) CRISPR technology is revolutionizing the improvement of tomato and other fruit crops. Hortic Res 6:77. https://doi.org/10.1038/s41438-019-0159-x
Wilson LOW, O'Brien AR, Bauer DC (2018) The current state and future of CRISPR-Cas9 gRNA design tools. Front Pharmacol 9:749. https://doi.org/10.3389/fphar.2018.00749
Wong N, Liu W, Wang X (2015) WU-CRISPR: characteristics of functional guide RNAs for the CRISPR/Cas9 system. Genome Biol 16:218. https://doi.org/10.1186/s13059-015-0784-780
Xie K, Minkenberg B, Yang Y (2015) Boosting CRISPR/Cas9 multiplex editing capability with the endogenous tRNA-processing system. Proc Natl Acad Sci USA 112:3570–3575. https://doi.org/10.1073/pnas.1420294112
Yan L, Wei S, Wu Y, Hu R, Li H, Yang W, Xie Q (2015) High-efficiency genome editing in Arabidopsis using YAO promoter-driven CRISPR/Cas9 system. Mol Plant 8:1820–1823. https://doi.org/10.1016/j.molp.2015.10.004
Yan F, Kuang Y, Ren B, Wang J, Zhang D, Lin H, Yang B, Zhou X, Zhou H (2018) Highly efficient AT to GC base editing by Cas9n-Guided tRNA adenosine deaminase in rice. Mol Plant 11:631–634. https://doi.org/10.1016/j.molp.2018.02.008
Zabinyakov N, Bullivant G, Cao F, Fernandez Ojeda M, Jia ZP, Wen XY, Dowling JJ, Salomons GS, Mercimek-Andrews S (2017) Characterization of the first knock-out aldh7a1 zebrafish model for pyridoxine-dependent epilepsy using CRISPR-Cas9 technology. PLoS ONE 12:e0186645. https://doi.org/10.1371/journal.pone.0186645
Zhang Li Z, Li JF (2016) Targeted gene manipulation in plants using the CRISPR/Cas technology. J Genet Genom 43:251–262. https://doi.org/10.1016/j.jgg.2016.03.001
Zhang Q, Xing HL, Wang ZP, Zhang HY, Yang F, Wang XC, Chen QJ (2018) Potential high-frequency off-target mutagenesis induced by CRISPR/Cas9 in Arabidopsis and its prevention. Plant Mol Biol 96:445–456. https://doi.org/10.1007/s11103-018-0709-x
Zong Y, Wang Y, Li C, Zhang R, Chen K, Ran Y, Qiu J, Wang D, Gao C (2017) Precise base editing in rice, wheat and maize with a Cas9-cytidine deaminase fusion. Nat Biotechnol 35:438–440. https://doi.org/10.1038/nbt.3811
We would like to thank Ms. Catherine Mason and Ms. Tien Thuy Vuong (USDA-ARS, SRRC) for superior technical assistance, Dr. Jen Sheen (Harvard Medical School) for the generous gift of the plant codon-optimized Cas9 gene, and Dr. Rajtilak Majumdar (USDA-ARS, SRRC) for critical reading of the manuscript and Mr. David Sliman (Institute of Biological Chemistry, Washington State University) for critical reading of the manuscript and technical assistance with seed photography.
Mention of trade names or commercial products in this publication is solely for the purpose of providing specific information and does not imply recommendation or endorsement from the U.S. Department of Agriculture. The USDA is an equal opportunity provider and employer.
Conflict of interest
The authors declare no conflict of interest.
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Electronic supplementary material
Below is the link to the electronic supplementary material.
Supplementary material 1 Supplementary Fig. 1 Examples of specific types of Cas9-mediated mutagenesis in vegetative tissues of Arabidopsis E113. Genomic DNA was isolated from fluorescence-depleted T1 leaf tissue of E640 and E642 plants, the DsRed ORF amplified by PCR, and digested with NcoI or PstI as appropriate. Restriction-resistant amplicons were purified, cloned, and sequenced. Representative examples are shown below, aligned to the native DsRed sequence. Query = native DsRed. Subject = cloned sequence from E640/E642 CRISPR plants (DOCX 24 kb)
Supplementary material 2 Supplementary Fig. 2 Visual inspection of fluorescence levels in T2 seeds of Arabidopsis E113 plants expressing negative control gene editing constructs lacking sgRNA elements. Segregating T2 seeds produced from 64 independent T1 lines expressing construct E638 used as a control to monitor parental red fluorescence in vegetative tissues (see Fig. 1) were harvested and inspected for changes in seed fluorescence levels. Samples from three representative lines were inspected visually by illumination with normal light (a, d, g), green light with no red filter (b, e, h) and green light with red filtering (c, f, i) (EPS 1,58,732 kb)
Supplementary material 3 Supplementary Fig. 3 Visual inspection of fluorescence levels in T2 seeds of Arabidopsis E113 plants expressing DsRed-targeted gene editing elements driven by constitutive promoters. Segregating T2 seeds produced from 64 independent T1 lines expressing either construct E640 or E642 used to target the DsRed gene in vegetative tissues (see Fig. 1 and Supplementary Fig. 1) were harvested and inspected for changes in parental red fluorescence. Samples from three representative E642 lines were inspected visually by illumination with normal light (a, d, g), green light with no red filter (b, e, h) and green light with red filtering (c, f, i). (EPS 1,55,463 kb)
Supplementary material 4 Supplementary Fig. 4 Mutant FAH12 loci CRISPR CL37 plants display typical types of Cas9-generated mutations. Cas9-mutated FAH12 PCR amplicons were produced by PCR, from genomic DNA isolated from E719 (UBQ10p:sgRNAAtACT8p:Cas9) and E720 (UBQ10p:sgRNA + YAOp:Cas9) plants that contained reduced amounts of seed HFA. After treatment with BstXI, restriction-resistant PCR products were purified, cloned, and sequenced. Seventeen copies were analyzed, which included: 9 single bp insertions, 3 single-bp deletions, two 4-bp deletions, one 6-bp deletion, one 7-bp deletion, and one 12-bp deletion. Representative sequences are shown below (subject), aligned to native FAH12 sequence (query). The PAM333 sequence is underlined, the recognition sequence for BstXI used to screen for mutations is boxed in yellow. See Fig. 2 for more details (DOCX 15 kb)
Supplementary material 5 Supplementary Fig. 5 Assessment of heritability of mutations acquired in additional low-HFA CL37 lines transformed with hydroxylase gene editing constructs. See Fig. 3 for analysis of segregating T2 seeds from line E720 #11, which contains <0.1% HFA. Other low-HFA samples circled in Fig. 3A were used to plant brown T2 seeds lacking gene editing T-DNA; HFA levels in T3 seeds from multiple progeny lines were quantified by GC. The HFA content in each segregating T2 seed sample is shown in parentheses following the line number in the title of each panel. (EPS 314 kb)
Supplementary material 6 Supplementary Fig. 6 Visual inspection of fluorescence levels in T2 seeds of Arabidopsis E113 plants expressing negative control gene editing constructs. Binary construct E716 (containing only a YAOp:Cas9 cassette) was transformed into Arabidopsis E113 and glufosinate-resistant seedlings were selected and grown to maturity. This construct lacks the DsRed-specific sgRNA element used in the lines shown in Fig. 7. Segregating T2 seed samples from three representative lines were inspected visually by illumination with normal light (a, d, g), green light with no red filter (b, e, h) and green light with red filtering (c, f, i). (EPS 1,74,898 kb)
About this article
Cite this article
Shockey, J. Gene editing in plants: assessing the variables through a simplified case study. Plant Mol Biol (2020). https://doi.org/10.1007/s11103-020-00976-2
- Single-guide RNA
- Hydroxy fatty acids
- Gene editing