The index properties of lateritic soils derived from sandstone, limestone, gneiss, granite, basalt, and migmatite in northeastern Nigeria were assessed for selecting the type with the best engineering potentials. The laboratory test results indicate that the tested samples comprised predominantly sand-sized particles (58–88%), with clay fraction (2–12%) of low to moderate plasticity (liquid limit, LL 35–49 and plasticity index, PI 12–24). Other geotechnical properties are as follows: natural water content (Wn), specific gravity (SG) 2.51–2.68, maximum dry density (MDD) 1.69–2.05 mg/m3, and unconfined compressive strength (UCS) 20–43 kPa. Principal component analysis reveals three significant factors. The first factor has loadings from clay, LL, PI, Wn, and SG, indicating impacts that are mineralogical and particulate constituent related. The second has loadings from gravel, MDD, and UCS and indicates textural influence, while the third factor has loadings from silt and sand, thus, reveals textural impact. The analysis of variance result reveals a significant difference in dataset, while cluster analysis indicates three different sample clusters, with a granite laterite sample representing the central object of the first cluster and sandstone and limestone laterite samples representing central objects of the second and third clusters, respectively. Comparatively, the second cluster samples would likely perform best in engineering projects having recorded comparatively the least clay content, lower plasticity, highest SG, MDD, and UCS. Thus, a combination of index properties and multivariate analysis proves a useful tool in the geotechnical prospecting for lateritic soils.
This is a preview of subscription content, log in to check access.
Buy single article
Instant access to the full article PDF.
Price includes VAT for USA
Subscribe to journal
Immediate online access to all issues from 2019. Subscription will auto renew annually.
This is the net price. Taxes to be calculated in checkout.
Adebayo, A. A., & Tukur, A. L. (2000). Adamawa State in maps. Yola: Paracellette.
Adelana, S. M. A., Olasehinde, P. I., Bale, R. B., Vrbka, P., Edet, A. E., & Goni, I. B. (2008). An overview of the geology and hydrogeology of Nigeria. In S. M. A. Adelana (Ed.), Applied groundwater studies in Africa (pp. 171–197). London: Taylor and Francis.
Adeyemi, G. O. (1995). The influence of parent rock factor on some engineering index properties of three residual lateritic soils in southeastern Nigeria. Bulletin of Engineering Geology and the Environment,52(1), 3–8.
Adeyemi, G. O., & Wahab, K. A. (2008). Variability in the geotechnical properties of a lateritic soil from South Western Nigeria. Bulletin of Engineering Geology and the Environment,67(4), 579–584.
Alao, D. A. (1983). Geology and engineering properties of laterites from Ilorin, Nigeria. Engineering Geology,19, 111–118.
ArcGIS (Version 9.3). Copyright © Esri Incorporated, California.
Arora, K. R. (2009). Soil mechanics and foundation engineering (7th ed.). Delhi: Lomus Offset Press.
ASTM Standard D2487. (2011). Standard Practice for Classification of Soils for Engineering Purposes (Unified Soil Classification System). West Conshohocken: American Society for Testing and Materials (ASTM) International.
ASTM Standard D698. (2007). Standard test method for laboratory compaction characteristics of soil using standard effort. West Conshohocken: American Society for Testing and Materials (ASTM) International.
ASTM Standard D854-02. (2002). Standard test method for specific gravity of soil solids by water Pycnometer. West Conshohocken: American Society for Testing and Materials (ASTM) International.
Bangar, K. M. (2005). Principles of engineering geology. Delhi: Standard Publishers.
Bogado, G. O., Reinert, H. O., & Francisca, F. M. (2017). Geotechnical properties of residual soils from the North-east of Argentina. International Journal of Geotechnical Engineering,13(2), 1–10.
British Standard Institution (BS). (1990). Method of tests on soils for civil engineering purposes, BS 1377. London: British Standard Institution.
Construction Industry Research and Information Association (CIRIA). (1995). Laterite in road pavements. Westminster: Special Publication 47 for Transport Research Laboratory.
CorelDraw (Version 11). Copyright © Corel Corporation, Ontario.
Das, B. M., & Sobhan, K. (2014). Principles of geotechnical engineering (8th ed.). Stanford: Cengage Learning.
Day, R. W. (1999). Geotechnical and foundation engineering: Design and construction. New York: McGraw-Hill.
de Brito Galvão, T. C., Elsharief, A., & Simoes, G. F. (2004). Effects of lime on permeability and compressibility of two tropical residual soils. Journal of Environmental Engineering,130, 881–885.
Duarte, I. M. R., Gomes, C. S. F., & Pinho, A. B. (2018). Chemical weathering. In P. T. Bobrowsky & B. Marker (Eds.), Encyclopedia of engineering geology of engineering geology (pp. 114–120). London: Springer Nature.
Ekwueme, B. N. (1994). Structural features of southern Obudu Plateau, Bamenda Massif, SE Nigeria: Preliminary Interpretations. Journal of Mining and Geology,30(1), 45–59.
Gogo-Abite, I. A. (2005). Slope stability analysis of laterite soil embankments. MS Thesis University of Central Florida, Orlando, Florida.
Grace, H. (1991). Investigations in Kenya and Malawi using as-dug laterite as bases for bituminous surfaced roads. Geotechnical and Geological Engineering,9, 183–195.
Iloeje, N. P. (2001). A new geography of Nigeria. Lagos: Longman.
Kasthurba, A. K., Santhanam, M., & Mathews, M. S. (2007). Investigation of laterite stones for building purposes from Malabar region, Kerala State, SW India. Part 1: Field studies and profile characterization. Construction and Building Materials,21, 73–82.
Kennedy, W. Q. (1964). The structural differentiation of Africa in the Pan-African (500 ± m.y.) tectonic episodes (Vol. 8). Leeds: Annual Report of the Research Institute of African Geology, University of Leeds.
MacDonald, A. M., Cobbing, J., & Davies, J. (2005). Developing groundwater for rural water supply in Nigeria: A report of the May 2005 training course and summary of the groundwater issues in the eight states. London: British Geological Survey Commissioned Report, CR/05/219 N.
Malomo, S. (1989). Microstructural investigation on laterite soils. Bulletin of the International Association of Engineering Geology,39(1), 105–109.
Nnadi, G. N. (1988). Mechanical and hydraulic properties of compacted tropical residual soils. Lulea: Research Report of Lulea University of Technology.
Novais, F. H. (1985). Characterization, identification and classification of tropical lateritic and saprolitic soils for geotechnical purposes. In Proceedings of the 1st international conference on geomechanics in tropical lateritic and saprolitic soils, Brasilia (Vol. 3).
Nwajide, C. S. (2013). Geology of Nigeria’s sedimentary basins. Lagos: CSS Bookshop.
Ogunsanwo, O. (1989). CBR and shear strengths of compacted laterite soils from southwestern Nigeria. Quarterly Journal of Engineering Geology and Hydrogeology,22(4), 317–328.
Ogunsanwo, O. (1995). Influence of geochemistry and mineralogy on the optimum geotechnical utilization of some laterite soils from SW Nigeria. Journal of Mining and Geology,31(2), 183–188.
Onyeobi, T. U. S., & Asuen, G. O. (2009). Pore structure of some residual tropical soils from southwestern Nigeria. Journal of Mining and Geology,45(1), 91–103.
Osuji, O. S., & Akinwamide, J. T. (2018). Engineering properties of lateritic soils in Ado-Ekiti, South Western Nigeria. American Journal of Engineering Research,7(1), 353–360.
Pinard, M. I., Netterberg, F., & Paige-Green, P. (2014). Review of specifications for the use of laterite in road pavements. Lilongwe: Association of Southern Africa National Roads Agencies Report.
Rahardjo, A., Satyanaga, A., Leong, E. C., Ng, Y. S., & Pang, H. T. C. (2012). Variability of residual soil properties. Engineering Geology,141&142, 124–140.
Raharjo, H. A., Aung, K. K., Leong, E. C., & Rezaur, R. B. (2004). Characteristics of residual soils in Singapore as formed by weathering. Engineering Geology,73, 157–169.
Raman, V. (1967). Identification of expansive soils from the plasticity index and the shrinkage index data. The Indian Engineer,11(1), 17–22.
Sowers, G. B., & Sowers, G. F. (1970). Introductory soil mechanics and foundations. New York: Macmillan.
Valeton, I., & Beibner, (1986). Geochemistry and mineralogy of the Lower Tertiary in situ laterites on the Jos Plateau, Nigeria. Journal of African Earth Sciences,5(5), 535–550.
Waltham, A. C. (1994). Foundations of engineering geology. Cambridge: Cambridge University Press.
World Bank Policy Study. (1988). Road deterioration in developing countries—Causes and remedies. Washington, DC: The World Bank Group.
XLSTAT Version 2019.13. Copyright ©Addinsoft Incorporated, New York.
Yilmaz, I. (2006). Indirect estimation of the swelling percent and a new classification of soils depending on liquid limit and cation exchange capacity. Engineering Geology,85, 295–301.
S. Magaji acknowledges the management and staff of the Nigerian Geological Survey Agency, Yola office, for providing most of the geological data used in the research. Climatic data were provided by the meteorological stations at the Upper Benue River Basin Development Authority, Yola, Modibbo Adama University of Technology, Yola, Adamawa State University, Mubi, and College of Agriculture, Ganye. The station officers are warmly appreciated for this. O. P. Aghamelu warmly appreciates Engr David Ezeh of the Materials Laboratory, Department of Civil Engineering, Michael Okpara University, Umudike, for assisting partly in the sampling and testing of the studied materials. The anonymous reviewers and the Editor-in-Chief of this journal are warmly appreciated for their reviews that assisted in improving the quality of this work.
About this article
Cite this article
Okogbue, C.O., Aghamelu, O.P. & Magaji, S. Assessment of Quality of Some Laterites in Northeastern Nigeria by Multivariate Analysis of their Geotechnical Index Properties. Nat Resour Res (2020). https://doi.org/10.1007/s11053-020-09632-4
- Construction material
- Geotechnical analysis
- Multivariate analysis
- Parent rock lithology