A survey on the state of nanosafety research in the European Union and the United States
Researchers in the field of environmental safety and health of nanomaterials (nanosafety) were surveyed between September 2017 and January 2018 to obtain a snapshot on the state of investigations in this field. The data received from 84 respondents give information on exposure pathways, methods, biologic and toxic effects, dose metrics and range, criteria for selecting benchmark materials, and on problems that are considered urgent in the field. The results can help guide research strategies and funding schemes related to nanosafety of nanoparticles. It is intended to repeat this survey every few years, to follow developments of the field.
KeywordsEnvironmental health Nanomaterials Nanoparticles Nanosafety Survey International perspective
adsorption, distribution, metabolism, excretion
community of research
reactive oxygen species
The European Union and the USA have established a dialogue on the environmental health and safety of nanomaterials (US-EU NanoEHS, n.d.), which is pursued through annual meetings and the “Communities of Research” (CoR), in which researchers from both sides of the Atlantic jointly consider topics pertaining to nanosafety, including research needs and funding priorities. We presented a draft of the survey to the members of several CORs in September 2017 and revised the survey based on the input we received. Between September 2017 and January 2018, the CoR on human toxicity conducted a survey on the state of nanosafety research. The CoR intends to repeat this survey every 2 to 3 years, to follow developments of the field. The survey was distributed through channels that are important to this community, including the US-EU NanoEHS participant list, the EU NanoSafety Cluster (n.d.), relevant scientific meetings (e.g., EUROTOX Bratislava, APS Hatfield, BNN Graz), and professional organisations (including the Society of Toxicology’s Nanotoxicology Specialty Section). We requested that participants forward the survey to their network.
We present here some of the data and tentative conclusions derived from them. The full set of primary data is available via the US-EU NanoEHS website and the EU NanoSafety Cluster website, as well as via the supplementary data to this article.
The anonymous survey was answered by 84 persons. A larger data sample would have been desirable but considering a general “survey fatigue” among scientists, we consider that number to be sufficient to get a general idea of the present status of investigations among the participants. Questions 1–9 allowed multiple answers. The resulting percentages may add up to more than 100%.
The majority of respondents identified themselves as having a background in toxicology/medicine/pharmacology. Material sciences, biology, and chemistry were about equally represented. The distribution strategy aimed at experts in nanosafety and nanotoxicology, which is reflected in the responses.
A series of questions aimed at information on what subjects are investigated and how. Publications may not fully represent ongoing scientific activities, and hard data on the focus of current research are difficult to come by. Our survey showed that more than 60% of respondents work on the inhalation pathway, which reflects safety concerns associated with this route of uptake. Ingestion and dermal uptake were in 2nd and 3rd place (30% and 23%, respectively). It is interesting that the dermal route is mentioned by nearly a quarter of respondents, even though the skin is often considered to be a rather efficient barrier. Medical conditions and consumer products may play a role here. Seven participants (8%) indicated investigating injections or intravenous exposures. Interestingly, a Google Scholar™ search (1. 11. 2018) for (nanosafety or nanotoxicology) plus one of the three exposure pathways shows a different ranking. There are 1570 articles listed for inhalation, but dermal leads ingestion by 892 articles versus 843. The attention seems to have shifted away from dermal exposure more recently, indicating that this pathway is now considered to be of lower concern than in the past. The stronger emphasis on ingestion in our survey may also be related to the fact that engineered nanomaterials were present in numerous cosmetic products for a longer time, with substantial media attention, whilst widespread use in food is a more recent development.
Type of nanomaterials
Seventy-five percent of respondents indicated they investigate unbound/free nanomaterials, and 65% indicate they investigate aggregated/agglomerated materials. Checking multiple answers was possible and the respondents may have referred to both: the unbound discrete nanomaterials and their agglomerates/aggregates. In contrast, only 35% of researchers state they work with matrix-bound nanomaterials. This can be interpreted either by a lower concern about particles as components of a solid matrix or by more difficult methodical challenges of matrix-bound particles. Questions like this are especially relevant to pursue over time, as additional nano-enabled products reach the consumers, and product life-cycle concerns and breakdown products have to be considered. From an occupational safety and health aspect, it is important to note that 75% of the respondents indicated that they work with unbound/free materials. According to this result, measures are needed to identify exposed workers, to monitor, control, and reduce workplace exposures, and to medically monitor exposed workers. This also requires the development of occupational exposure standards and protocols for exposure and medical monitoring.
Tests performed are mainly chemical/physical characterisation or testing in vitro/in vivo. Despite high hopes for in silico methods, only 12% of respondents performed them. Given strong efforts in that direction, that number should increase in the future. Five participants indicated they were engaged in epidemiologic studies, a number that may also increase in the future.
Biologic/toxic effects under investigation (Fig. 1)
Again, a Google Scholar™ search (1. 11. 2018) for (nanosafety or nanotoxicology) plus phrases that indicate effects gives a somewhat different picture. The number of listed articles is as follows: reactive oxygen species or ROS, 1180; immune, 1090; genetic or DNA, 1170; neurological or neurologic or brain, 165; reproduction or development, 916; and cancer or carcinogenesis, 832.
Reactive oxygen species are strongly linked to immune responses, so the high number of papers on both is not surprising. The lower number of respondents indicating developmental or reproductive effects may indicate that environmental toxicologists may have been underrepresented in the group of respondents since reproductive effects are mainly studied in multi-generation studies on environmental organisms. The high number of publication on cancer and genetic effects—also strongly linked—is likely due to the fact that many of them come from the medical community.
The nanomaterials under investigation are associated with many potential commercial applications: paint and coatings are mentioned most frequently (51%), followed by pharmaceuticals/medicine (45%), food/food contact materials (42%), and textiles and composite materials (40% each). As the uses of nanomaterials evolve and mature, we expect to see a change in the type of applications under investigation.
One difficulty in dealing with literature is that dose/concentration is reported in different ways. The survey showed no emerging consensus. Weight in milligramme per kilogramme body weight, per millilitre blood, or per cubic metre air are all used, as are number of particles per cubic metre and surface area. At the nanoscale, the mass of the particles is less relevant than the accessibility of the particle surface to react with their environment (reactivity and/or surface area). Thirteen participants (15%) indicated they include surface area in their reporting of dose or concentration, but no participant used reactivity-based measures.
Doses used in experiments are to equal extents determined by reported concentrations in products or environment and by doses necessary to observe effects. ADME (adsorption, distribution, metabolism, excretion) models play a minor role. For finding a “threshold”, 46% of respondents use NOAEL and 31% use LOAEL, whilst 37% do not attempt to find a threshold dose.
Criteria for benchmark materials (Fig. 2)
Urgency for investigation (Fig. 3)
We thank all our colleagues who have responded to the survey; the U.S. National Nanotechnology Coordination Office, the U.S. National Nanotechnology Initiative, and the European Commission, who bring together NanoEHS researchers in the Communities of Research for the US-EU dialogue. The contents are solely the responsibility of the authors and do not necessarily represent the official views of the California Department of Public Health, the U.S. Centers for Disease Control and Prevention, or the U.S. Department of Health and Human Services.
Open access funding provided by Paris Lodron University of Salzburg. AD was supported by funding from the European Union’s Horizon 2020 Research and Innovation Programme, under the Grant Agreements No 723623 (EC4SafeNano), No 671881 (PANDORA), and No 731032 (NanoCommons). GW was supported by the Cooperative Agreement Number NU61TS000278, funded by the Centers for Disease Control and Prevention.
Compliance with ethical standards
Conflict of interest
The authors declare that they have no conflict of interest.
The datasets generated and analysed during the current study are included in the supplementary information to this article.
Open Access This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made.