Advertisement

Metal Science and Heat Treatment

, Volume 61, Issue 7–8, pp 472–477 | Cite as

Special Features of Recrystallization of Rolled Sections from Austenitic Chromium-Nickel Steels Under Thermal Deformation Treatment

  • I. N. Kunitskaya
  • Ya. I. SpektorEmail author
  • A. V. Klimov
  • V. E. Ol’shanetskii
CORROSION-RESISTANT STEELS
  • 1 Downloads

Regular features of the effect of recrystallization of austenite under hot deformation on the formation of structure in thermal deformation treatment (with subsequent hold in the furnace and without it) of rolled sections from corrosion-resistant austenitic chromium-nickel steels 10Kh17N13M2T (EI-447) and 12Kh18N19MT are investigated. The kinetics of the austenite recrystallization is studied by metallography and measurement of the hardness of specimens and of the microhardness of recrystallized and not recrystallized grains. The volume of the recrystallized grains and their mean size are determined. The effect of the homogenizing modes in heating for quenching, and of accelerated and decelerated cooling after rolling in a 1050/950 rolling mill of the “Dneprospetsstal’” Company on the impact toughness of the steels is studied.

Key words

rolled sections multipass hot deformation dynamic recrystallization chromium-nickel steels thermal deformation treatment microstructure properties 

References

  1. 1.
    M. L. Bernshtein, V. A. Zaimovskii, and L. M. Kaputkina, Thermomechanical Treatment of Steel [in Russian], Metallurgiya, Moscow (1983), 480 p.Google Scholar
  2. 2.
    S. S. Gorelik, S. V. Dobatkin, and L. M. Kaputkina, Recrystallization of Metals and Alloys [in Russian], Metallurgiya, Moscow (2005), 432 p.Google Scholar
  3. 3.
    Ya. I. Spektor, A. V. Nogovitsyn, Yu. V. Artamonov, et al., “Promising processes of joint heat and deformation treatment of rolled sections of special steels,” in: Building, Materals Science, and Machine Building, Coll. Works, PGASA, Dnepropetrovsk (2008), Issue 45, Part 4, pp. 18 – 31.Google Scholar
  4. 4.
    S. Z. Nekrasova, A. M. Sergienko, Ya. I. Spektor, et al., “Grain refinement under recrystallization of strained austenite and the properties of steel,” Fiz. Met. Metalloved., 41(6), 1213 – 1218 (1976).Google Scholar
  5. 5.
    Ya. I. Spektor, I. N. Kunitskaya, Yu. V. Yatsenko, and A. N. Tumko, “Thermokinetic diagrams of recrystallization of austenite in hot rolling of special steels,” Metalloved. Term. Obrab. Met., No. 7, 6 – 9 (2008).Google Scholar
  6. 6.
    W. Roberts, H. Boden, and B. Ahlblom, “Dynamic recrystallization kinetics,” Metal Sci., 13(3 and 4), 195 – 205 (1979).CrossRefGoogle Scholar
  7. 7.
    A. Marchattiwar, A. Sarkar, J. K. Chakravartty, et al., “Dynamic recrystallization during hot deformation of 304 austenitic stainless steel,” J. Mater. Sci. Perform., 22(8), 2168 – 2175 (2013).CrossRefGoogle Scholar
  8. 8.
    M. Jafari and A. Najafizadeh, “Dynamic recrystallization by necklace mechanism during hot deformation of 316 stainless steel,” Metal, 13.-15.5, 1 – 8 (2008).Google Scholar
  9. 9.
    M. I. Sinelnikov and N. V. Tikhiy, “About variation of the dislocation structure of austenite in the process of hot deformation by rolling,” Izv. Akad. Nauk SSSR, Metally, No. 2, 153 – 157 (1977).Google Scholar

Copyright information

© Springer Science+Business Media, LLC, part of Springer Nature 2019

Authors and Affiliations

  • I. N. Kunitskaya
    • 1
  • Ya. I. Spektor
    • 1
    Email author
  • A. V. Klimov
    • 2
  • V. E. Ol’shanetskii
    • 2
  1. 1.“UkrNIIspetsstal’”ZaporozheUkraine
  2. 2.National Technical UniversityZaporozheUkraine

Personalised recommendations