Advertisement

A Study of Plastic Deformation of 08G2B Steel Before and at the Yield Plateau by Digital Image Correlation Technique. Part 1. Formation of Plastic and Elastic Deformation Waves

  • V. M. Farber
  • O. N. Polukhina
  • D. I. Vichuzhanin
  • V. A. KhotinovEmail author
  • S. V. Smirnov
Article
  • 9 Downloads

Specifics of plastic flow during tensile deformation of the samples of ultra-fine grained steel (08G2B) susceptible to deformation aging have been studied by using a digital image correlation technique. The heat treatment of steel was performed according to the following schemes: 1) heating to 250°C, soaking for 30 min, and cooling in air; and 2) heating to 680°C without soaking, and cooling in air. The standard flat samples were subjected to tensile testing at a constant deformation rate. It was shown that the Luders deformation in the tensile-loaded samples is concentrated in the flow channels formed at the stage of macro-elastic deformation and genetically connected with the maxima of the standing elastic wave.

Key words

tensile curve digital image correlation technique displacement field plastic flow channels 

Notes

This study was performed at the Ural Federal University (UrFU) under the financial support made possible by Resolution No. 211 of the Government of the Russian Federation (Contract No. 02.A03.21.0006), and at the Institute of Engineering Science (IMASh) of the Ural branch of the Russian Academy of Sciences (UB RAS) within the scope of the governmental assignment No. 0391-2016-0004. The tests were carried out using the equipment of the Resource Sharing Centers at UrFU and “Plastometriya” at IMASh.

References

  1. 1.
    R. Honeycomb, Plastic Deformation in Metals [Russian translation], Mir, Moscow (1972), 408 p.Google Scholar
  2. 2.
    M. A. Shtremel, Strength of Alloys. Part II: Deformation [in Russian], MISIS, Moscow (1997), 527 p.Google Scholar
  3. 3.
    V. M. Farber, A. B. Arabey, I. Yu. Pyshmintsev, et al., “Effect of low-temperature heating on mechanical properties of K65 (X80) grade pipeline steels,” Proizvod. Prokata, No. 11, 35 – 39 (2012).Google Scholar
  4. 4.
    V. M. Farber, O. V. Selivanova, A. B. Arabey, et al., “Effect of heat treatment on a complex of mechanical properties of K65 (X80) grade steels,” Metalloved. Term. Obrab. Met., No. 8, 53 – 58 (2014).Google Scholar
  5. 5.
    J. Han, Ch. Lu, B. Wu, and J. Li, “Innovative analysis of Luders band behavior in X80 pipeline steel,” Mater. Sci. Eng. A., 683, 123 – 128 (2017).CrossRefGoogle Scholar
  6. 6.
    S. Nagarajan and R. Narayanaswamy, “Study of local zones constituting to band growth associated with inhomogeneous plastic deformation,” Mater. Lett., 105, 209 – 212 (2003).CrossRefGoogle Scholar
  7. 7.
    L. B. Zuev, “Auto-wave model of plastic flow,” Fizich. Mezomekh., 14(3), 85 – 94 (2011).Google Scholar
  8. 8.
    M. M. Krishtal, “Instability and mesoscopic non-uniformity of plastic deformation (analytic review): Part I. Phenomenology of the yield drop and discontinuous yielding,” Fizich. Mezomekh., 7(5), 5 – 29 (2004).Google Scholar
  9. 9.
    S. Yoshida, B. Siahaan, and M. H. Pardede, “Observation of plastic deformation wave in a tensile-loaded aluminum alloy,” Phys. Lett. A., 251(1), 54 – 60 (1999).CrossRefGoogle Scholar
  10. 10.
    M. A. Sutton, J.-J. Orteu, and H.W. Schreier, Image Correlation for Shape, Motion and Deformation Measurements, University of South Carolina, Columbia, SC, USA (2009), 364 p.Google Scholar
  11. 11.
    S. Avril, F. Pierron, and M. A. Sutton, “Identification of elastoplastic parameters and characterization of Luders behavior using digital image correlation and the virtual field method,” Mech. Mater., 40, 729 – 742 (2008).CrossRefGoogle Scholar
  12. 12.
    V. E. Vil’deman, L. S. Tretyakov, T. V. Tretyakova, et al., Experimental Study of the Material Properties under Complex Thermomechanical Conditions [in Russian], Fizmatlit, Moscow (2012), 204 p.Google Scholar
  13. 13.
    S. V. Panin, O. V. Bashkov, N. A. Semashko, et al., “Combined study of the deformation specifics of flat and notched samples at micro- and meso-levels by acoustic emission methods and mapping surface deformation,” Fizich. Mezomekh., 7(S2), 303 – 306 (2004).Google Scholar
  14. 14.
    S. V. Smirnov, V. A. Khotinov, D. I. Vichuzhanin, et al., “The digital image correlation method applied to studying the plastic flow of the 08G2BM steel under tension,” Diagnostics, Resource and Mechanics of Materials and Structures, No. 3, 6 – 13 (2018).Google Scholar
  15. 15.
    V. M. Farber and O. V. Selivanova, “Classification of relaxation processes and their effect during plastic deformation of metals,” Izv. Ross. Akad. Nauk, Metally, No. 1, 110 – 114 (2001).Google Scholar
  16. 16.
    V. E. Panin, V. A. Likhachev, and Yu. V. Grinyaev, Structural Levels of Deformation of Solid Bodies [in Russian], Nauka, Novosibirsk (1985), 232 p.Google Scholar
  17. 17.
    Open Physics 2.6. Part I. Mechanical Oscillations and Waves [Electronic resource]: Fizikon (2017), URL: http:// www.physics.ru/textbook/index.html.
  18. 18.
    F. McClintock and A. Argon, Deformation and Fracture of Materials [in Russian], Mir, Moscow (1970), 443 p.Google Scholar
  19. 19.
    J. Caisso and J. Micard, “Contribution a l’etude de la propagation des bandes de Luders daus les solution solides,” Les Memoires Scientif. de la Rev. de Metallurg, 57(1), 57 – 61 (1960).Google Scholar
  20. 20.
    A. Cottrell, “Discontinuous yielding,” in: Structure and Mechanical Properties of Metals [in Russian], Metallurgiya, Moscow, 210 – 224 (1967).Google Scholar

Copyright information

© Springer Science+Business Media, LLC, part of Springer Nature 2019

Authors and Affiliations

  • V. M. Farber
    • 1
  • O. N. Polukhina
    • 1
  • D. I. Vichuzhanin
    • 2
  • V. A. Khotinov
    • 1
    Email author
  • S. V. Smirnov
    • 2
  1. 1.Ural Federal University (UrFU)EkaterinburgRussia
  2. 2.Institute of Engineering Science (IMASh)Ural Branch of the Russian Academy of ScienciesEkaterinburgRussia

Personalised recommendations