Advertisement

Measurement Techniques

, Volume 61, Issue 9, pp 891–896 | Cite as

A Method of Direct Monitoring of the Suitability of an Assembled Extended Cylindrical Projectile Body

  • A. S. Yamnikov
  • O. A. Yamnikova
  • I. A. Matveev
  • E. N. Rodionova
LINEAR AND ANGULAR MEASUREMENTS
  • 6 Downloads

A method is proposed for monitoring the suitability of a modular extended cylindrical shell of a rocket projectile. The method is based on direct measurement of the amount of entry during the shell installation process by outer bourrelets into the roller prisms, wherein the line of operation of the measuring device is perpendicular to the sides of the prisms. The proposed method of monitoring is compared with the traditional method, in which the radial runout of the middle bourrelet is measured also when the shell is installed by the outer bourrelets into the roller prisms. It was established that the new monitoring method is more effective in view of its greater objectivity and lesser labor intensity.

Keywords

radial runout entry assembled bodies contiguous profile 

References

  1. 1.
    S. V. Gurov, “9K58 Smerch multiple launch rocket system,” in Multiple Launch Rocket Systems. Review, GNPP Splav, Tula (2010), 2nd electronic ed.Google Scholar
  2. 2.
    A. A. Red’ko, S. A. Poltorykhin, S. A. Kudryavtsev, and I. L. Kosarev, “The infl uence of technological deviations in the manufacture of PC MLRS on their dispersion during firing,” Boeprip. Vysokoenerg. Kondens. Sist., No. 1, 32–35 (2008).Google Scholar
  3. 3.
    GOST R 53442-2015 (ISO 1101:2012), Basic Norms of Interchangeability. Geometrical Product Specifications. Geometrical Tolerance. Tolerances of Form, Orientation, Site, and Runout. Google Scholar
  4. 4.
    GOST 24642-81, Basic Norms of Interchangeability. Tolerances of Form and Arrangement of Surfaces. Basic Terms and Definitions. Google Scholar
  5. 5.
    O. A. Yamnikova, A. S. Yamnikov, and I. A. Matveev, “Infl uence of the ovality of the base surfaces of thin-walled extended axially symmetric hollow parts on the error of radial runout measurements in prisms,” Izmer. Tekh., No. 3, 32–36 (2018).Google Scholar
  6. 6.
    A. S. Yamnikov (ed.), Foundations of the Technology of Mechanical Engineering: Textbook, Izd. TulGU, Tula (2006).Google Scholar
  7. 7.
    V. I. Tregubov, A. S. Yamnikov, and I. A. Matveev, “Technological provision of specified design parameters for parts of the TORNADO-G MLRS engine,” Izv. Ross. Akad. Raket. Artill. Nauk, No. 4 (99), 94–98 (2017).Google Scholar
  8. 8.
    A. S. Yamnikov, O. A. Yamnikova, I. A. Matveev, and E. N. Rodionova, “Effect of position errors of composite axial-symmetric body joint surfaces on the position error of operating surfaces,” Vestn. Bryansk. Gos. Tekh. Univ., No. 7 (60), 13–17 (2017).Google Scholar
  9. 9.
    A. S. Yamnikov and I. A. Matveev, “Statistical analysis of accuracy of machining of extended parts from a stamped billet of the glass type,” Izv. TulGU. Tekh. Nauki, No. 9, Pt. 2, 121–126 (2015).Google Scholar
  10. 10.
    RD 50-635-87, Methodological Instructions. Dimension Chains. Primary Concepts. Methods of Calculating Linear and Angular Chains. Google Scholar

Copyright information

© Springer Science+Business Media, LLC, part of Springer Nature 2018

Authors and Affiliations

  • A. S. Yamnikov
    • 1
  • O. A. Yamnikova
    • 2
  • I. A. Matveev
    • 2
  • E. N. Rodionova
    • 2
  1. 1.Tula State UniversityTulaRussia
  2. 2.SPLAV Scientific and Production AssociationTulaRussia

Personalised recommendations