Advertisement

Measurement Techniques

, Volume 61, Issue 9, pp 863–871 | Cite as

Level of Verification of Measuring Instruments and a Posteriori Reliability of Control

  • S. F. Levin
GENERAL PROBLEMS OF METROLOGY AND MEASUREMENT TECHNIQUE
  • 1 Downloads

Problems that arise in the application of international and national standards for estimation of the quality of check tests of measuring instruments are considered.

Keywords

level of verification a posteriori reliability confidence probability convolution tolerance interval 

References

  1. 1.
    MI 187–86, MU GSI. Measuring Instruments. Reliability Criterion and Parameters of Verification Technique.Google Scholar
  2. 2.
    MI 1317–2004, GSI. Results and Characteristics of Measurement Error. Forms of Representation. Methods of Application in Tests of Samples of Products and Control of Their Parameters.Google Scholar
  3. 3.
    MI 188–86, MU GSI. Measuring Instruments. Establishing the Values of the Parameters of Verification Techniques.Google Scholar
  4. 4.
    MI 2916–2005, GSI. Identification of Probability Distributions in the Solution of Measurement Problems.Google Scholar
  5. 5.
    ISO 10576-1:2003, Guide Lines for the Evalution of Conformity with Specified Requirements. Part 1: General Principles (GOST R ISO 10576-1–2006, Statistical Methods. Guide to the Estimation of Conformity to Established Requirements. Part 1. General Principles).Google Scholar
  6. 6.
    Guide to the Expression of Uncertainty in Measurement, ISO, Switzerland (1995); Guide to the Expression of Uncertainty in Measurement [Russian translation], VNIIM (1999).Google Scholar
  7. 7.
    ISO 3534.1–93, Statistical Methods. Probability and General Statistical Terms. Terms and Definitions (GOST R 50779.10–2000, Statistical Methods, Probability and the Foundations of Statistics. Terms and Definitions).Google Scholar
  8. 8.
    GOST R 50779.21–2004, Statistical Methods. Rules for Determination and Methods of Calculation of Statistical Characteristics from Sample Data. Part 1. Normal Distribution.Google Scholar
  9. 9.
    GOST R ISO 16269-6–2005, Statistical Methods. Statistical Representation of Data. Determination of Statistical Tolerance Intervals.Google Scholar
  10. 10.
    GOST R 50779.11–2000 (ISO 3534.2–93), Statistical Methods. Statistical Quality Control. Terms and Definitions.Google Scholar
  11. 11.
    ISO/IEC Guide 98-3:2008. Uncertainty of Measurement. Part 3: Guide to the Expression of Uncertainty in Measurement (GOST R 54500.3–2011/ISO/MEK 98-3:2008 Guide, Uncertainty in Measurement. Part 3. Guide to the Expression of Uncertainty in Measurement.)Google Scholar
  12. 12.
    GOST R ISO 5725–2002, Accuracy (correctness and precision) of Methods and Results of Measurements.Google Scholar
  13. 13.
    H. Sheffe, Dispersion Analysis [Russian translation], Nauka, Moscow (1980).Google Scholar
  14. 14.
    S. F. Levin, “Uncertainty in the narrow and in the broad sense of results of verification of measuring instruments,” Izmer. Tekhn., No. 9, 15–19 (2007).Google Scholar
  15. 15.
    S. F. Levin, “Problem of confidence probability,” Izmer. Tekhn., No. 9, 33–39 (2008).Google Scholar
  16. 16.
    S. F. Levin, “Assurance of the uniformity of measurements in tests of measuring instruments,” Izmer. Tekhn., No. 10, 13–17 (2008).Google Scholar
  17. 17.
    S. F. Levin, “Statistical methods and metrological certification of computer programs used in measurement systems,” Izmer. Tekhn., No. 11, 14–19 (2008).Google Scholar
  18. 18.
    S. F. Levin, “What in fact can save leading specialists in the introduction of uncertainty in domestic measurements,” Izmer. Tekhn., No. 12, 61–64 (2008).Google Scholar
  19. 19.
    RMG 29–2013, GSI. Metrology. Basic Terms and Definitions.Google Scholar
  20. 20.
    JCGM 100:201X (CD), Evaluation of Measurement Data, Guide to the Expression of Uncertainty in Measurement.Google Scholar
  21. 21.
    G. Korn and T. Korn, Handbook on Mathematics for Scientific Workers and Engineers [Russian translation], Nauka, Moscow (1980).Google Scholar
  22. 22.
    P. V. Novitskii and I. A. Zograf, Estimation of the Errors of Measurement Results, Energoatomizdat, Leningrad (1965).Google Scholar
  23. 23.
    R 50.1.037–2002, Applied Statistics. Rules for Validation of Compliance of a Trial Distribution with a Theoretical Distribution. Part II. Nonparametric Criteria.Google Scholar
  24. 24.
    GOST 19919–74, Control of the Automatic Technical State of Articles in Aviation Engineering. Terms and Definitions.Google Scholar
  25. 25.
    GOST R 8.731–2010, GSI. Systems of Permissible Control. Basic Assumptions.Google Scholar
  26. 26.
    GOST 8.009–84, GSI. Normalized Metrological Characteristics of Measuring Instruments.Google Scholar
  27. 27.
    R.50.2.004–2000, GSI. Determination of the Characteristics of Mathematical Models of Relationships Between Physical Quantities in the Solution of Measurement Problems. Basic Assumptions.Google Scholar
  28. 28.
    A. N. Shiryaev, Statistical Sequential Analysis, Nauka, Moscow (1976), 2nd ed.Google Scholar
  29. 29.
    F. Mosteller and J. Tukey, Analysis of Data and Regression [Russian translation], Finansy i Statistika, Moscow (1982).Google Scholar

Copyright information

© Springer Science+Business Media, LLC, part of Springer Nature 2018

Authors and Affiliations

  1. 1.Moscow Institute of Examination and TestingMoscowRussia

Personalised recommendations