Advertisement

Measurement Techniques

, Volume 61, Issue 9, pp 859–862 | Cite as

State Primary Standard of the Unit of Surface Density and Unit of Mass Fraction of Elements in Coatings Get 168–2015

  • V. V. Kazantsev
  • S. V. Medvedevskikh
  • A. S. Vasil’ev
Article
  • 2 Downloads

The basic characteristic, composition, and measurement capabilities of the State Primary Standard of the unit of surface density and unit of mass fraction of elements in coatings GET 168–2015 are presented. The role of the standard and of certified reference materials traceable to the standard in assurance of the quality of multicomponent and multilayer coatings is demonstrated.

Keywords

standard certified reference materials coating surface density mass fraction 

References

  1. 1.
    V. V. Kazantsev and A. S. Vasil’ev, “State and outlook for the development of metrological assurance and standardization in the field of NK of coatings by radiation methods,” V Mire Nerazrush. Kontrolya, 20, No. 1, 30–31 (2017).Google Scholar
  2. 2.
    V. V. Kazantsev and A. S. Vasil’ev, “Investigation of methods and instruments for creating multiparameter certified reference materials of the composition and properties of coatings,” Stand. Obraztsy, No. 1, 42–46 (2014).Google Scholar
  3. 3.
    V. V. Kazantsev and A. S. Vasil’ev, “State Primary Special Standard and certified reference materials in support of the uniformity of measurements of the surface density of coatings,” Izmer. Tekhn., No. 10, 48–50 (2011).Google Scholar
  4. 4.
    Certificate of State Registration of Computer Program No. 2017614801, “Program for processing the results of measurements for GET 168–2015,” 04.27.2017.Google Scholar
  5. 5.
    GOST R 8.612–2011, GSI. State Measurement Chain for Instruments for Measurement of the Surface Density of Coatings in the Range from 1·10–4 to 1000 kg/m2.Google Scholar
  6. 6.
    V. V. Kazantsev, S. V. Medvedevskikh, D. P. Nalobin, E. V. Osintseva, and G. I. Terent’ev, “Development of techniques for estimating inhomogeneity in the creation of certified reference materials of the chemical composition and properties of nanodimensional materials,” Stand. Obraztsy, No. 2, 27–48 (2011).Google Scholar
  7. 7.
    Ye. P. Sobina, S. V. Medvedevskikh, V. V. Kazantsev, et al., “Creation of certified reference materials of the composition, thickness, and surface density of permalloy-on-silicon nanodimensional coatings,” Zavod. Lab., 78, No. 8, 64–68 (2012).Google Scholar
  8. 8.
    GOST 9.302–88, Unified System of Anticorrosion Protection. Metallic and Nonmetallic Inorganic Coatings. Testing Methods. Google Scholar
  9. 9.
    GOST R ISO 54500.3–2011 / ISO/MEK 98-3:2008 Guide, Measurement Uncertainty. Part 3. Guide to the Expression of Uncertainty in Measurement.Google Scholar
  10. 10.
    S. S. Golubev, L. S. Babadzhanov, K. V. Gogolinskii, and V. A. Syas’ko, “Critical questions in metrological assurance of quality control of coatings,” Zakonodat. Prikl. Meteorol., No. 1, 19–23 (2017).Google Scholar

Copyright information

© Springer Science+Business Media, LLC, part of Springer Nature 2018

Authors and Affiliations

  • V. V. Kazantsev
    • 1
  • S. V. Medvedevskikh
    • 1
  • A. S. Vasil’ev
    • 1
  1. 1.Ural Research Institute of MetrologyEkaterinburgRussia

Personalised recommendations