Advertisement

Investigation of Production Conditions for Ultra-Low Carbon IF-, IF-HS-Steels from Cold-Rolled Product of Different Strength Classes Annealed in Bell Furnaces

  • A. I. ZaitsevEmail author
  • A. V. Koldaev
  • A. B. Stepanov
  • A. V. Grishin
  • I. A. Krasnyanskaya
Article

Possibilities and conditions are studied for preparing cold-rolled batch annealed steels of different strength classes from one chemical composition of ultra-low carbon IF-, IF-HS-steels using cassette technology and annealing in bell furnaces. Regimes and parameters are developed for laboratory modeling of rolled product batch annealing with substantiation of heating and slow cooling schemes. Coldrolled products are obtained with both a low yield strength (below σT ≤ 170–180 MPa) and strength class 180 using IF-steels of one chemical composition, in the majority of cases having a relative elongation of more than 50%. Prospects are established of using batch annealing in bell furnaces for production, including cassette technology, of high-quality cold-rolled steel from IF-HS-steels of different strength classes.

Keywords

ultra-low carbon IF IF-HS-steels cold rolled product bell furnace annealing strength classes cassette technology yield strength relative elongation 

Notes

Work was conducted within the scope of an agreement for supply of a subsidy of 11.26.2018 No. 075-11-2018170. Unique PMER (project) identifier RFMEF162418X0050.

References

  1. 1.
    M. A. Benyakovskii and V. A. Maslenikov, Automobile Steel and Thin Sheet [in Russian], ID Cherepovets (2007).Google Scholar
  2. 2.
    A. Abraham, Metallic Material Trends for North American Light Vehicles. Great Designs in Steel Seminar, Ducker Worldwide (2015).Google Scholar
  3. 3.
    A. I. Zaitsev, I. G. Rodionova, S. V. Yashchuk, et al., “Development of scientific and technological bases of automobile sheet steel manufacture,” Chern. Met., 1359, No. 3, 89–109 (2013).Google Scholar
  4. 4.
    A.I. Zaitsev, A. V. Koldaev, Yu. S. Gladchenkova, et al., “Study and modeling of annealing regimes in bell furnaces for cold-rolled high-strength microalloyed steels,” Metallurgist, 60, No. 6, 602–611 (2016).CrossRefGoogle Scholar

Copyright information

© Springer Science+Business Media, LLC, part of Springer Nature 2019

Authors and Affiliations

  • A. I. Zaitsev
    • 1
    • 2
    Email author
  • A. V. Koldaev
    • 1
  • A. B. Stepanov
    • 1
  • A. V. Grishin
    • 1
  • I. A. Krasnyanskaya
    • 1
  1. 1.FGUP I. P. Bardin TsNIIchermetMoscowRussia
  2. 2.M. V. Lomonosov Moscow State UniversityMoscowRussia

Personalised recommendations