Push Benches and Prospects of Their Application

  • M. D. AlyutinEmail author
  • V. V. Shirokov

At present, push benches are not currently used in Russia because the experience of their operation in the USSR gave negative results. The history of application of push benches and the possibility of extension of the assortment of produced pipes are discussed. We present the analysis of the available data on the productivity and assortment of contemporary push benches. The advantages and disadvantages of modern pipe-rolling plants with push benches in the current economic situation are considered. The comparison of the characteristics of reeling mills reveals numerous significant advantages of push benches over the continuous reeling mills.


push bench СРЕ productivity 


  1. 1.
    V. G. Zimovets and V. Yu. Kuznetsov, Improvement of the Production of Steel Pipes [in Russian], MISiS, Moscow (1996).Google Scholar
  2. 2.
    V. N. Shevchenko, V. I. Lindenbaum, and Z. S. Vol’shonok, Contemporary State and Prospects of Development of the Method of Production of Pipes on Plants with Push Benches [in Russian], Chermetinformatsiya, Moscow (1990).Google Scholar
  3. 3.
    F. A. Danilov, A. Z. Gleinberg, and V. G. Balankin, Hot Rolling and Pressing of the Pipes [in Russian], Metallurgiya, Moscow (1962).Google Scholar
  4. 4.
    Yu. N. Stasovskii, V. P. Sokurenko, A. N. Stepanenko, and Yu. D. Ugryumov, “Current state and prospects of manufacturing and consumption of pipe products in the world,” Chern. Metall., Bull. NTiÉI, No. 7, 62–71 (2014).Google Scholar
  5. 5.
    Mechanical Engineering. Encyclopedia, Vol. IV-5: Machines and Plants of Metallurgical Production [in Russian], Mashonostroenie, Moscow (2004).Google Scholar
  6. 6.
    V. Ya. Osadchii and A. P. Kolikov, Production and Quality of Steel Pipes [in Russian], MIGUPI, Moscow (2012).Google Scholar
  7. 7.
    A. N. Stepanenko, Yu. D. Ugryumov, and V. I. Getalo, “Concept of a pipe-rolling shop with push bench unit,” Metall. Gornorud. Promyshl., No. 3, 65−68 (2014).Google Scholar
  8. 8.
    Yu. N. Stasovskii, A. N. Stepanenko, and Yu. D. Ugryumov, “Development of pipe production at plants with push benches,” in: Proc. of the Scientific Sem. “Plastic Metal Working” [in Russian], Aktsent PP, Dnepropetrovsk (2014), pp. 89–93.Google Scholar
  9. 9.
    G. A. Orlov, E. N. Vagapov. V. A. Spiridonov, and T. V. Spiridonova, “Prospects of development of the method of pipe rolling on a push bench,” in: Proc. of the 3rd Regional Sci.-Tech. Conf. “Education and Production” [in Russian], Verkhnyaya Salda (2009), pp. 149–154.Google Scholar
  10. 10.
    B. A. Romantsev, A. V. Goncharuk, et al., “Efficiency of the processes of hot plugging of the pipes on the mandrel,” Chern. Metall., Bull. NTiÉI, No. 11, 3741 (2002).Google Scholar
  11. 11.
    B. N. Matveev and L. A. Nikitina, “Current state and prospects of pipe production in Russia and abroad,” Proizvod. Prokat., No. 2, 3640 (2000).Google Scholar
  12. 12.
    X. Mingxiang and Li Peng, “Technological scheme for ∅ 168 mm hot-roller seamless steel pipe CPE plant as planned,” Steel Pipe, No. 5, 57–61(2012).Google Scholar

Copyright information

© Springer Science+Business Media, LLC, part of Springer Nature 2019

Authors and Affiliations

  1. 1.“RosNITI” Open Joint Stock CompanyChelyabinskRussia
  2. 2.“YuUrGU” (National Research University) Federal State Autonomous Educational Institution of Higher EducationChelyabinskRussia

Personalised recommendations