Advertisement

Metallurgist

pp 1–11 | Cite as

Advanced Technology of Combined Thin Slab Continuous Casting and Steel Strip Hot Rolling

  • A. V. MuntinEmail author
Article
  • 7 Downloads

On the basis of proceedings of an international symposium on casting and rolling complexes the latest solutions for hot-rolled strip production by a combined process of continuous thin slab casting and rolling are reviewed. Advanced developments in the field of equipment and technologies are presented. The main tendencies and future tasks on this subject are noted.

Keywords

casting and rolling complex hot-rolled strip endless strip production ultra-thin strip highstrength steel grades special steel grades 

References

  1. 1.
    X. Mао and S. Wang, “Exploration and innovation: 30 years’ development of thin slab casting and direct rolling technology,” in: Internat. Symp. on Thin Slab Casting and Direct Rolling, Wuhan (China) (2018), pp. 2–11.Google Scholar
  2. 2.
    H. T. Tsai, “Development and current status of thin slab casting in USA,” in: Internat. Symp. on Thin Slab Casting and Direct Rolling, Wuhan (China) (2018), pp. 18–25.Google Scholar
  3. 3.
    A. Carboni, A. Muntin, A. Polo, et al. “Pushing the limits of the thin slab casting and rolling process for pipe grades,” in: Internat. Symp. on Thin Slab Casting and Direct Rolling, Wuhan (China) (2018), pp. 142–150.Google Scholar
  4. 4.
    A. V. Muntin, Yu. M. Kurenkov, and A. G. Kolesnikov, “Contemporary production solutions and equipment for manufacturing ultrathin hot-rolled strip,” Proizvod. Prokata, No. 8, 13–21 (2016).Google Scholar
  5. 5.
    V. L. Salganik, I. G. Gui, A. S. Karandaev, and A. A. Rodionov, Thin Slab Casting and Rolling Unit for Steel Strip Production: Textbook [in Russian], N. E. Bauman MGTU, Moscow (2003).Google Scholar
  6. 6.
    V. S. Lisin and A. A. Selyaninov, Models and Algorithms for Calculating Contemporary Casting Process Characteristics [in Russian], Vyshch. Shkola, Moscow (1995).Google Scholar
  7. 7.
    V. V. Naumenko, A. V. Muntin, A. V. Chervonnyi, and L. I. Éfron, “Effect of microalloying on the structure and mechanical property level for coiled rolled product of strength class K56, produced under CRC conditions,” Stal’, No. 7, 50–56 (2015).Google Scholar
  8. 8.
    A. V. Chervonyi, V. V. Naumenko, A. V. Muntin, et al., “Microalloying cold-resistant pipe steels for producing coiled rolled product in a casting and rolling complex,” Stal’, No. 9, 56–61 (2015).Google Scholar
  9. 9.
    A. V. Muntin, A. V. Chastukhin, A. V. Chervonnyi, et al., “Development of coiled rolled product for pipe purposes of strength class K60 produced under casting and rolling complex conditions,” Probl. Chern. Met, Materialoved., No. 3, 17–25 (2016).Google Scholar
  10. 10.
    A. V. Chervonnyi, V. V. Naumenko, A. V. Muntin, et al., “Development of a microalloying system for producing cold resistant coiled rolled product for pipe purposes under CRC conditions,” Metallurg, No. 10, 38–44 (2016).Google Scholar
  11. 11.
    World Direct Reduction Statistics, Midrex [Electronic Source]: URL:https://www.midrex.com/assets/user/news/Midrex-StatsBook2016.pdf. Access date: 05.22.18.
  12. 12.
    A. Jungbauer, G. Wersching, A. Viehböck, and B. Linzer, “Achievements at Rizhao Steel’s new ESP complex setting new standards,” in: Internat. Symp. on Thin Slab Casting and Direct Rolling, Wuhan (China) (2018), pp. 375–380.Google Scholar
  13. 13.
    S. H. Lee, “CEM Process: POSCO’s innovative endless rolling process of TSCR,” in: Internat. Symp. on Thin Slab Casting and Direct Rolling, Wuhan (China) (2018), pp. 12–17.Google Scholar
  14. 14.
    Z. Qin, Y. Yu, W. Zhao, et al., “Development and application of ESP products in Rizhao Steel,” in: Internat. Symp. on Thin Slab Casting and Direct Rolling, Wuhan (China) (2018), pp. 49–58.Google Scholar
  15. 15.
    A. Pigani, P. Bobig, and M. Knights, “Danieli Universal Endless – DUE the First-ever universal solution for flat products SGJT leads the way for the future of thin slab casting & rolling,” in: Internat. Symp. on Thin Slab Casting and Direct Rolling, Wuhan (China) (2018), pp. 66–69.Google Scholar
  16. 16.
    Y. Kang, P. Tian, L. Chen, et al., “Characteristics analysis of process, microstructure and properties of hot rolled low-carbon and extra low-carbon steels by ESP,” in: Internat. Symp. on Thin Slab Casting and Direct Rolling, Wuhan (China) (2018), pp. 33–43.Google Scholar
  17. 17.
    N. Isasti, P. Uranga, J. M. Rodriguez-Ibabe, et al., “Quality and performance improvements of Nb microalloyed steels based on modeling approaches for TSCR route,” in: Internat. Symp. on Thin Slab Casting and Direct Rolling, Wuhan (China) (2018), pp. 121–125.Google Scholar
  18. 18.
    J. Xia, X. Huo, L. Li, et al., “Recrystallization behavior of Ti microalloyed high strength steel produced by CSP process,” in: Internat. Symp. on Thin Slab Casting and Direct Rolling, Wuhan (China) (2018), pp. 375–380.Google Scholar
  19. 19.
    D. Hennessy, K. De Amar, C. Mahimkar, et al., “Technological exploitation of a new flex mill at Big River Steel, USA for the production of advanced grades of steels,” in: Internat. Symp. on Thin Slab Casting and Direct Rolling, Wuhan (China) (2018), pp. 44–48.Google Scholar
  20. 20.
    X. Zhou, Z. Qin, Z. Liu, et al., “Production practice of high quality DP600 steel based on ESP process,” in: Internat. Symp. on Thin Slab Casting and Direct Rolling, Wuhan (China) (2018), pp. 151–155.Google Scholar
  21. 21.
    G. Yang, X. Mao, G. Zhao, et al., “Microstructure and mechanical properties of TRIP600 steel produced by simulated CSP process,” in: Internat. Symp. on Thin Slab Casting and Direct Rolling, Wuhan (China) (2018), pp. 278–282.Google Scholar
  22. 22.
    X. Miao, G. Zhao, Y. Xu, and H. Huang, “Investigation of continuous cooling phase transformation on 22MnB5 hot stamping steel,” in: Internat. Symp. on Thin Slab Casting and Direct Rolling, Wuhan (China) (2018), pp. 294–298.Google Scholar
  23. 23.
    Z. Wang, R. Han, K. Hu, and Z. Deng, “Effect of heat-treatment process on microstructure evolution of ultra-high strength hot stamping steel,” in: Internat. Symp. on Thin Slab Casting and Direct Rolling, Wuhan (China) (2018), pp. 227–230.Google Scholar
  24. 24.
    H. Li, J. Zhang, X. Gao, et al., “Production practice of 22MnB5 for hot stamping by FTSR process at Tangsteel,” in: Internat. Symp. on Thin Slab Casting and Direct Rolling, Wuhan (China) (2018), pp. 227–230.Google Scholar
  25. 25.
    J. Fan, Y. Yu, M. Du, et al., “Applied research on hot stamping steel produced by thin slab casting and direct rolling for automobiles,” in: Internat. Symp. on Thin Slab Casting and Direct Rolling, Wuhan (China) (2018), pp. 107–120.Google Scholar
  26. 26.
    K. Hu, X. Mao, T. Gong, et al., “Development and application of a press hardening steel produced by thin slab casting and directly rolling,” in: Internat. Symp. on Thin Slab Casting and Direct Rolling, Wuhan (China) (2018), pp. 137–141.Google Scholar
  27. 27.
    L. Xiao, W. Chen, D. Wu, and Z. Zhang, “The production of medium high carbon steel of CSP,” in: Internat. Symp. on Thin Slab Casting and Direct Rolling, Wuhan (China) (2018), pp. 258–262.Google Scholar
  28. 28.
    Z. Tian, M. Wang, S. Wang, et al., “Study on ESP high carbon steel mould powder,” in: Internat. Symp. on Thin Slab Casting and Direct Rolling, Wuhan (China) (2018), pp. 514–517.Google Scholar
  29. 29.
    Z. Cai, S. Wang, J. Xu, et al., “Impact of hot rolling process on microstructure and properties of high carbon strip steel,” in: Internat. Symp. on Thin Slab Casting and Direct Rolling, Wuhan (China) (2018), pp. 204–209.Google Scholar
  30. 30.
    S. Bao, S. Xu, G. Zhao, et al., “Effect of coiling temperatures on the microstructure and mechanical properties of hot-rolled strip of alloy tool steel SKS51 produced by TSCR process,” in: Internat. Symp. on Thin Slab Casting and Direct Rolling, Wuhan (China) (2018), pp. 289–293.Google Scholar
  31. 31.
    F. He, Y. Pei, S. Huang, et al., “Study on hot rolling precipitation behavior of low and medium grade non-oriented silicon steel,” in: Internat. Symp. on Thin Slab Casting and Direct Rolling, Wuhan (China) (2018), pp. 263–268.Google Scholar
  32. 32.
    J. P. Kong and J. S. Chung, “A Study on material properties and manufacturing technology of CEM products,” in: Internat. Symp. on Thin Slab Casting and Direct Rolling, Wuhan (China) (2018), pp. 97–101.Google Scholar

Copyright information

© Springer Science+Business Media, LLC, part of Springer Nature 2019

Authors and Affiliations

  1. 1.FGBOU VO N. É. Bauman Moscow State Technical University (National Research University)MoscowRussia

Personalised recommendations