Advertisement

Digital Control of Electrically Welded Pipe Manufacturing Technology in a Tesa 20–102 Mill

  • V. B. TimofeevEmail author
  • A. A. Bogatov
  • I. B. Medyantsev
Article
  • 21 Downloads

In order to manufacture hot-reduced pipe from welded pipe billets in a continuous stretch-reducing mill (SRM) 20–102 coiled hot-rolled product is used of normal precision with respect to thickness, specified in GOST 19903. The actual value of longitudinal difference in thickness for the main mass of coiled rolled product comprises 70% of the proportion of pipe tolerance with respect to thickness, which makes it difficult to satisfy the specifications of GOST 10704 and GOST 3262 for pipe wall thickness, and also increases the metal consumption factor for a ton of finished product.

Due to development of a rapid algorithm and a calculation program for reduction production regimes, rational calibration of rolls, pipe stretching between mills and stands in a 22-stand SRM, a control system for hot-reduced pipe manufacturing technology is created and introduced. As a result of this the longitudinal difference in pipe wall thickness compared with the longitudinal difference in strip wall thickness is reduced by an order of magnitude. This makes it possible to manufacture pipe in the minus range of permissible values for deviation of wall thickness, to reduce the metal consumption factor, to increase the output of finished product, to reduce specific energy expended in pipe rolling in the SRM, and to assimilate manufacture of a thin-walled range of pipes.

Keywords

electric-welded pipes digital control of technology strip different thickness pipe wall thickness variation roll sizing pipe reduction regime 

References

  1. 1.
    V. L. Kolmogorov, Mechanics of Metal Treatment with Pressure [in Russian], UGTU UPI, Ekaterinburg (2001).Google Scholar
  2. 2.
    A. F. Danilov, A. Z. Gleiberg, and V. G. Balakin, Pipe Hot Rolling and Pressing [in Russian], Metallurgiya, Moscow (1972).Google Scholar
  3. 3.
    V. N. Danchenko, A. P. Kolikov, B. A. Romantsev, et al., Pipe Manufacture Technology [in Russian], Intermet Inzhiniring, Moscow (2002).Google Scholar
  4. 4.
    Yu. F. Shevakin, A. P. Kolikov, and Yu. N. Raikov, Pipe Manufacture [in Russian], Intermet Inzhiniring, Moscow (2005).Google Scholar
  5. 5.
    G. I. Gulyaev, P. N. Ivshin, and I. N. Erokhin, Continuous Unadjusted Pipe Rolling Technology [in Russian], Metallurgiya, Moscow (1975).Google Scholar
  6. 6.
    M. F. Stoletnii and E. D. Klempert, Pipe Accuracy [in Russian], Metallurgiya, Moscow (1975).Google Scholar
  7. 7.
    I. N. Potapov, A. P. Kolikov, and V. M. Druyan, Pipe Manufacture Theory [in Russian], Metallurgiya, Moscow (1991).Google Scholar
  8. 8.
    V. Ya. Osadchii, A. S. Vavilin, V. G. Zimovets, and A. P. Kolikov, Pipe Manufacturing Technology and Equipment [in Russian], Intermet Inzhiniring, Moscow (2007).Google Scholar
  9. 9.
    B. A. Romantsev, A. V. Goncharuk, N. M. Vavilkin, and S. V. Samusev, Pipe Manufacture [in Russian], ID MISiS, Moscow (2011).Google Scholar
  10. 10.
    V. V. Eriklintsev, D. S. Fridman, and N. A. Bogatov, Experience of Assimilating Continuous production of Pipes with Stretching [in Russian], Sred. Ural. Knizh. Izd. Sverdlovsk (1966).Google Scholar
  11. 11.
    V. P. Anisiforov, L. S. Zel’dovich, and V. D. Kurganov, Reducing Mills [in Russian], Metallurgiya, Moscow (1971).Google Scholar
  12. 12.
    A. V. Vydrin, E. V. Khramkov, and M. V. Bunyashin, “Energy balance of the pipe rolling process of an oil range in a reducing mill,” Metallurg, No. 1, 21–25 (2016).Google Scholar

Copyright information

© Springer Science+Business Media, LLC, part of Springer Nature 2019

Authors and Affiliations

  • V. B. Timofeev
    • 1
    Email author
  • A. A. Bogatov
    • 2
  • I. B. Medyantsev
    • 3
  1. 1.PAO Northern Pipe PlantPolevskoiRussia
  2. 2.FGAOU VO B. N. El’tsin Ural Federal UniversityEkaterinburgRussia
  3. 3.PAO Northern Pipe PlantPolevskoiRussia

Personalised recommendations