Materials Science

, Volume 55, Issue 1, pp 52–62 | Cite as

Optimization of the Process of Machining of Inhomogeneous Built-Up Parts of Tractors

  • V. V. KolomietsEmail author
  • R. V. Antoshchenkov
  • R. V. Ridnyi
  • S. A. Bogdanovich
  • I. A. Fabrichnikova

We study the fracture of inhomogeneous built-up materials by cutting tools made of hard alloys and superhard materials based on boron nitride and determine the characteristics of their inhomogeneity and machinability. The mutual influence and relationship between of physicomechanical characteristics of cutting and machining of the built-up parts of tractors are estimated. By using these data, we optimize the process of cutting and determine its optimal speed.


cutting built-up material machine parts inhomogeneity coefficients finish turning 


  1. 1.
    F. V. Novikov and A. V. Yakimov (editors), Physical-and-Mathematical Theory of the Processes of Machining of Materials and the Technology of Machine Building [in Russian], Vol. 3: Cutting of Materials by Edge Tools, Odessa Nats. Politekh. Univ., Odessa (2003).Google Scholar
  2. 2.
    N. V. Novikov and A. S. Klimenko (editors), Tools Made of Superhard Materials [in Russian], Mashinostroenie, Moscow (2014).Google Scholar
  3. 3.
    V. V. Kolomiets, Yu. P. Simonenko, and Yu. V. Kirichenko, “Algorithm for the evaluation of the coefficients of inhomogeneity and machinability of the inhomogeneous built-up materials,” Sborn. Nauch. Trudov Kharkiv Gos. Avt.-Dor. Univ., No. 4, 46 (1996).Google Scholar
  4. 4.
    L. N. Tishchenko, V. V. Kolomiets, S. A. Klimenko, V. Kumar, M. A. W. Usmani, and V. A. Fadeev, “Theoretical substantiation of the relationship and mutual influence of the characteristics of cutting of the built-up materials,” Visn. Khatkiv Nats. Tekh. Univ. Sil’s’k. Hospod. “Resursosbereh. Tekhnol. Mater. Obladn. Remont. Vyrobn.,” Issue 146, 232–237 (2014).Google Scholar
  5. 5.
    V. V. Kolomiets, I. M. Luk’yanov, I. A. Fabrichnikova, R. V. Ridnyi, and S. A. Klimenko, “Determination of the dependence of coarse irregularities of the surface on the procedure of surfaces and their influence on machining,” Visn. Inzh. Akad. Ukr., No. 3, 252–255 (2000).Google Scholar
  6. 6.
    V. I. Sementsov and V. V. Kolomiets, “Physical characteristics of machining of the recovered camshafts of trucks by cutting tools made of SHM,” Visn. Khatkiv Nats. Tekh. Univ. Sil’s’k. Hospod., Issue 33, 33–37 (2005).Google Scholar
  7. 7.
    V. V. Kolomiets, L. N. Tishchenko, V. V. Suglobova, K. M. Lyubicheva, S. A. Klimenko, and V. Kumar, “Specific features of changes in the characteristics of friction in the process of cutting of the built-up materials,” Visn. Khatkiv Nats. Tekh. Univ. Sil’s’k. Hospod. “Tekh. Serv. APK Tekh. Tekhnol. Sil’s’k. Mash.,” Issue 115, 22–26 (2011).Google Scholar
  8. 8.
    V. V. Kolomiets, A. I. Spol’nik, R. V. Ridnyi, K. M. Lyubicheva, L. V. Karpova, and V. Kumar, “Influence of the inhomogeneity of built-up materials on the cutting temperature,” Visn. Kharkiv Nats. Tekh. Univ. Sil’s’k. Hospod. “Resursosbereh. Tekhnol. Mater. Obladn. Remont. Vyrobn.,” Issue 183, 57–63 (2017).Google Scholar

Copyright information

© Springer Science+Business Media, LLC, part of Springer Nature 2019

Authors and Affiliations

  • V. V. Kolomiets
    • 1
    Email author
  • R. V. Antoshchenkov
    • 1
  • R. V. Ridnyi
    • 1
  • S. A. Bogdanovich
    • 1
  • I. A. Fabrichnikova
    • 1
  1. 1.Vasilenko Kharkiv National Technical Agricultural UniversityKharkivUkraine

Personalised recommendations