Advertisement

Materials Science

, Volume 54, Issue 3, pp 378–386 | Cite as

Elevation of the Wear Resistance of Low-Alloy Structural Steel by Plasma-Powder Surfacing with Alloys Based on Iron, Chromium, and Nickel

  • E. F. Perepl’otchikov
  • Kh. B. Vasyliv
  • V. A. Vynar
  • I. O. Ryabtsev
  • V. I. Zakiev
Article
  • 7 Downloads

We study the chemical and structural inhomogeneities and the parameters of wear resistance of the coatings obtained by the arc-welding method. The coatings were obtained from PR-KhN80SSR3, PN-AN-34, and Kh17N8S6G powders based on nickel, cobalt, and iron, respectively, and from an experimental powder based on Ni and Fe. The tribological properties of iron-based alloys are better than for the cobalt- and nickel-based alloys. In the course of friction, the austenitic component of the coating undergoes plastic deformation as a result of which it covers the surface as a lubricant, which decreases the friction coefficient and wear.

Keywords

plasma-powder surfacing powders iron nickel cobalt wear resistance 

References

  1. 1.
    A. Hasui, Thermal Spraying Engineering [in Japanese], Sanpo, Tokyo (1966).Google Scholar
  2. 2.
    Ul. Dilthey and L. Kabatnik, “Zentral Pulverzufuhr beim Plasmauftragschweiβen,” Schweiβen und Schneiden, No. 12, 766–771 (1998).Google Scholar
  3. 3.
    P. V. Gladkii, E. F. Perepletchikov, and V. I. Rabinovich, Plasma Facing in the Construction of Power Reinforcements [in Russian], NIIINFORMTYAZHMASH, Moscow (1970).Google Scholar
  4. 4.
    I. I. Frumin, P. V. Gladkii, and E. F. Perepletchikov, Heat- and Wear-Resistant Ni-Based Alloy [in Russian], Authors’ Certificate, No. 339591 SSSR. S22s 19/00, Bull. No. 17 (1972).Google Scholar
  5. 5.
    J.-J. Tian, S.-W. Yao, X.-T. Luo, C.-X. Li, and Ch.-J. Li, “An effective approach for creating metallurgical self-bonding in plasmaspraying of NiCr–Mo coating by designing shell-core-structured powders,” Acta Materialia, 110, 19–30 (2016).Google Scholar
  6. 6.
    B. Li, J. Jia, M. Han, Y. Gao, and C. Li, “Microstructure, mechanical and tribological properties of plasma-sprayed NiCrAlY–Mo–Ag coatings from conventional and nanostructured powders,” Surf. Coat. Technol., 324, 552–559 (2017).Google Scholar
  7. 7.
    T. Hejwowski, “Sliding wear resistance of Fe-, Ni- and Co-based alloys for plasma deposition,” Vacuum, 80, Issues 11–12, 1326–1330 (2006).Google Scholar
  8. 8.
    A. Klimpel, L. A. Dobrzański, A. Lisiecki, and D. Janicki, “The study of the technology of laser and plasma surfacing of engine valves face made of X40CrSiMo10-2 steel using cobalt-based powders,” J. Mater. Proc. Tech., 175, Issues 1–3, 251–256 (2006).Google Scholar
  9. 9.
    G. Bolelli, A. Milanti, L. Lusvarghi, L. Trombi, and P. Vuoristo, “Wear and impact behavior of high-velocity air-fuel sprayed Fe–Cr–Ni–B–C alloy coatings,” Tribology Int., 95, 372–390 (2016).Google Scholar
  10. 10.
    K. Bobzin, L. Zhao, M. Öte, and T. Königstein, “Novel Fe-based wear and corrosion resistant coatings by threecathode plasma technology,” Surf. Coat. Technol., 318, 288–292 (2017).Google Scholar
  11. 11.
    P. V. Gladkii, E. F. Perepletchikov, and I. A. Ryabtsev, Plasma-Powder Surfacing [in Russian], Èkotekhnologiya, Kiev (2007).Google Scholar
  12. 12.
    T. R. Stupnyts’kyi, M. M. Student, H. V. Pokhmurs’ka, and V. M. Hvozdets’kyі, “Optimization of the chromium content of powder wires of the Fe–Cr–C and Fe–Cr–B systems according to the corrosion resistance of electric-arc coatings,” Fiz.-Khim. Mekh. Mater., 52, No. 2, 23–28 (2016); English translation : Mater. Sci., 52, No. 2, 165–172 (2016).Google Scholar
  13. 13.
    A. A. Voitovych, H. V. Pokhmurs’ka, M. M. Student, and O. Z. Student, “Microstructure and abrasive-wear resistance of the vibration-deposited metal of core wires of the basic Fe–Cr–B system,” Fiz.-Khim. Mekh. Mater., 52, No. 3, 63–68 (2016); English translation : Mater. Sci., 52, No. 3, 365–370 (2016).Google Scholar
  14. 14.
    Yu. I. Golovin, Nanoindentation and Its Possibilities [in Russian], Metallurgiya, Moscow (1991).Google Scholar
  15. 15.
    S. R. Ignatovich and I. M. Zakiev, “Universal micro/nanoindenter “Mikron-gamma”,” Zavod. Lab., 77, No. 1, 61–67 (2011).Google Scholar

Copyright information

© Springer Science+Business Media, LLC, part of Springer Nature 2018

Authors and Affiliations

  • E. F. Perepl’otchikov
    • 1
  • Kh. B. Vasyliv
    • 2
  • V. A. Vynar
    • 2
  • I. O. Ryabtsev
    • 1
  • V. I. Zakiev
    • 3
  1. 1.E. Paton Institute of Electric Welding Ukrainian National Academy of SciencesKievUkraine
  2. 2.Karpenko Physicomechanical InstituteUkrainian National Academy of SciencesLvivUkraine
  3. 3.National Aviation UniversityKievUkraine

Personalised recommendations