Materials Science

, Volume 54, Issue 3, pp 326–332 | Cite as

On the Influence of Curvature of the Trajectories of Deformation of a Volume of the Material by Pressing on Its Plasticity Under the Conditions of Complex Loading

  • V. А. Ogorodnikov
  • I. А. Dereven’ko
  • R. I. SivakEmail author

In the experimental investigations of the plasticity of cylindrical specimens of R9, R12, and R18 steels, subjected to simultaneous torsion with tension, it is discovered that, under the conditions of complex loading, the rate of accumulation of defects and their healing in the form of derivatives of the parameters of stressed state exerts a significant influence on the characteristics of plasticity. It is shown that, under these conditions, when the first and second derivatives of the dimensionless parameter of stressed state grow, the influence of curvature of the deformation paths of particles in the material on plasticity becomes more pronounced. The accumulated results enable us to select the phenomenological criteria of fracture, which give more reliable results of estimation of the applied plasticity resource in the technological processes of pressure treatment.


deformability of metals complex loading deformation path loading trajectory deformation trajectory deformation history accumulation of defects 


  1. 1.
    A. A. Il’yushin, “On one theory of long-term strength,” Izv. Akad. Nauk SSSR, Mekh. Tverd. Tela, No. 3, 21–35 (1967).Google Scholar
  2. 2.
    V. A. Ogorodnikov, Estimation of the Deformability of Metals Subjected to Pressure Treatment [in Russian], Vyshcha Shkola, Kiev (1983).Google Scholar
  3. 3.
    H. Dell, H. Gese, L. Kessler, H. Werner, and H. Hooputra, “Continuous failure prediction model for nonlinear load paths in successive stamping and crash processes,” in: SAE-Paper 2001-01-1131, New Sheet Steel Products and Sheet Metal Stamping (SP-1614), SAE 2001 World Congress (Michigan, March 5–8, 2001), Michigan (2001), pp. 113–122.Google Scholar
  4. 4.
    H. Hooputra, H. Gese, H. Dell, and H. Werner, “A comprehensive failure model for crashworthiness simulation of aluminum extrusions,” Int. J. Crashworthiness, 9, No. 5. 449–463 (2004).CrossRefGoogle Scholar
  5. 5.
    V. A. Ogorodnikov, A. V. Grushko, and I. A. Dereven’ko, “Modeling of the processes of pressure treatment on the basis of the hypothesis of force and kinematic similarity of the deformation parameters,” Obrab. Met. Davlen., No. 4(34), 46–52 (2012).Google Scholar
  6. 6.
    I. O. Sivak and E. I. Kotsyubivskaya, “Plasticity of metals in the three-dimensional stressed state,” in: Improvement of the Processes and Equipment for Pressure Treatment in Metallurgy and Machine-Building [in Russian], Kramatorsk–Khmel’nitskii (2007), pp. 73–76.Google Scholar
  7. 7.
    V. A. Ogorodnikov, I. A. Dereven’ko, and L. I. Alieva, Resource of Plasticity of the Metal in the Case of Cold Volumetric Form Changes [in Russian], VNTU, Vinnitsa (2016).Google Scholar
  8. 8.
    V. Ogorodnikov, G. Del, and L. Spiridonov, “Plasticity of metal subjected to complex loading,” Izv. Vyssh. Uchebn. Zaved., Mashinostr., No. 12, 22–26 (1974).Google Scholar
  9. 9.
    V. A. Ogorodnikov, V. Ye. Perlov, and S. V. Voytkiv, “Control of technological heredity in the process of sheet-metal stamping in order to increase the constructions safety,” Visn. Nats. Tekh. Univ. “Kyiv Politekh. Inst.,” Ser. “Mashynobud.,” No. 60, 133–137 (2010).Google Scholar
  10. 10.
    G. A. Smirnov-Alyaev, Mechanical Foundations of the Plastic Treatment of Metals [in Russian], Mashinostroenie, Leningrad (1978).Google Scholar
  11. 11.
    V. L. Kolmogorov, Stresses, Strains, Fracture [in Russian], Metallurgiya, Moscow (1970).Google Scholar
  12. 12.
    V. A. Ogorodnikov and N. A. Shestakov, “Deformability of the metal subjected to rotary swaging,” Izv. Vyssh. Uchebn. Zaved., Mashinostr., No. 9, 147–152 (1975).Google Scholar

Copyright information

© Springer Science+Business Media, LLC, part of Springer Nature 2018

Authors and Affiliations

  • V. А. Ogorodnikov
    • 1
  • I. А. Dereven’ko
    • 1
  • R. I. Sivak
    • 1
    Email author
  1. 1.Vinnitsa National Technical UniversityVinnitsaUkraine

Personalised recommendations