Advertisement

Mixed convection in a trapezoidal enclosure filled with two layers of nanofluid and porous media with a rotating circular cylinder and a sinusoidal bottom wall

  • Ahmed Kadhim Hussein
  • Hameed K. Hamzah
  • Farooq H. Ali
  • Lioua KolsiEmail author
Article
  • 24 Downloads

Abstract

The laminar two-dimensional mixed convection in a trapezoidal enclosure with a rotating inner circular cylinder and a sinusoidal bottom wall is studied numerically. The fluid inside the enclosure is a CuO–water nanofluid layer in the top space of it, while the bottom space includes a CuO–water nanofluid saturated with a porous medium. Both the right and left sidewalls are assumed adiabatic, while the bottom and the top walls of the enclosure are maintained, respectively, at the hot and cold temperatures. The dimensionless governing equations are expressed for velocity and temperature formulation and modeled by using COMSOL code based on the Galerkin finite element method. Parametric studies on the effects of various significant parameters such as Rayleigh number, Darcy number, the inner cylinder radius, the porous layer thickness, the angular rotational velocity, the solid volume fraction and the number of undulations on the flow and thermal fields together with the heat transfer rate have been performed. The highest value of the stream function for (Ra = 103 and Ra = 105) is seen at (R = 0.2 and S = 0.2). The same thing is observed, when the bottom wall is considered wavy. For (Ra = 103 and N = 0) and (0.5 ≤ S ≤ 0.8), it can be seen that as the inner cylinder radius increases from (R = 0.1) to (R = 0.3), the stream function values increase continuously. It is found that the average Nusselt number increases as the Rayleigh and Darcy numbers, the solid volume fraction, inner cylinder radius and the angular rotational velocity of the cylinder increase, while it decreases as the porous layer thickness and the number of undulations increase. Comparisons with previously published numerical works are performed, and good agreements between the results are observed.

Keywords

Mixed convection Nanofluid Trapezoidal enclosure Porous media Rotating cylinder Sinusoidal wall 

List of symbols

\(c_{\text{p}}\)

Heat capacitance (J kg−1 °C−1)

Da

Darcy number

g

Gravitational acceleration (m s−2)

\(k_{\text{f}}\)

Thermal conductivity of the fluid (W m−1 °C−1)

L

Height and width of the trapezoidal enclosure (m)

Nu

Nusselt number

N

Number of undulations

P

Dimensionless pressure

p

Pressure (N m−2)

Pr

Prandtl number

R

Dimensionless radius of the inner cylinder

r

Radius of the inner cylinder (m)

Ra

Rayleigh number

Re

Reynolds number

Ri

Richardson number

S

Porous layer thickness (m)

T

Temperature (°C)

U

Dimensionless velocity component in x-direction

u

Dimensional velocity component in x-direction (m s−1)

V

Dimensionless velocity component in y-direction

v

Dimensional velocity component in y-direction (m s−1)

w

Width of the trapezoidal enclosure (m)

X

Dimensionless coordinate in horizontal direction

x

Cartesian coordinate in horizontal direction (m)

Y

Dimensionless coordinate in vertical direction

y

Cartesian coordinate in vertical direction (m)

Greek symbols

α

Thermal diffusivity (m2 s−1)

β

Volumetric thermal expansion coefficient (K−1)

θ

Dimensionless temperature distribution

φ

Solid volume fraction

ε

Porosity

\(\zeta\)

Amplitude of the wavy wall

Ω

Dimensionless angular rotational velocity

\(\omega\)

Angular rotational velocity (rad s−1)

\(\nu\)

Kinematic viscosity (m2 s−1)

ρ

Density (kg m−3)

\(\mu\)

Dynamic viscosity (kg m−1 s−1)

Ψ

Dimensionless stream function

λ

Permeability of the porous medium (m2)

Subscripts

ave

Average

c

Cold

eff

Effective

fl

Base fluid

h

Hot

loc

Local

Max

Maximum

Min

Minimum

na

Nanofluid particle

o

Center of enclosure

po

Porous medium

so

Solid particles

Notes

Acknowledgements

The fourth author would like to acknowledge the research deanship of University of Ha’il, KSA for funding the project “191225”.

References

  1. 1.
    Choi U. Enhancing thermal conductivity of fluids with nanoparticles. In: Siginer DA, Wang HP, (editors). Developments and applications of non-Newtonian flows, FED 231, 1995, pp. 99–105.Google Scholar
  2. 2.
    Chand R, Rana G, Hussein AK. On the onset of thermal instability in a low Prandtl number nanofluid layer in a porous medium. J Appl Fluid Mech. 2015;8(2):265–72.CrossRefGoogle Scholar
  3. 3.
    Chand R, Rana G, Hussein AK. Effect of suspended particles on the onset of thermal convection in a nanofluid layer for more realistic boundary conditions. Int J Fluid Mech Res. 2015;42(5):375–90.CrossRefGoogle Scholar
  4. 4.
    Hussein AK, Walunj A, Kolsi L. Applications of nanotechnology to enhance the performance of the direct absorption solar collectors. J Therm Eng. 2016;2(1):529–40.Google Scholar
  5. 5.
    Hussein AK. Applications of nanotechnology in renewable energies-A comprehensive overview and understanding. Renew Sustain Energy Rev. 2015;42:460–76.CrossRefGoogle Scholar
  6. 6.
    Hussein AK. Applications of nanotechnology to improve the performance of solar collectors—recent advances and overview. Renew Sustain Energy Rev. 2016;62:767–92.CrossRefGoogle Scholar
  7. 7.
    Hussein AK, Li D, Kolsi L, Kata S, Sahoo B. A review of nano fluid role to improve the performance of the heat pipe solar collectors. Energy Proc. 2017;109:417–24.CrossRefGoogle Scholar
  8. 8.
    Mahian O, Kolsi L, Amani M, Estellé P, Ahmadi G, Kleinstreuer C, Marshall J, Siavashi M, Taylor R, Niazmand H, Wongwises S, Hayat T, Kolanjiyil A, Kasaeian A, Pop I. Recent advances in modeling and simulation of nanofluid flows—part I: fundamentals and theory. Phys Rep. 2019;790:1–48.CrossRefGoogle Scholar
  9. 9.
    Mahian O, Kolsi L, Amani M, Estellé P, Ahmadi G, Kleinstreuer C, Marshall J, Taylor R, Abu-Nada E, Rashidi S, Niazmand H, Wongwises S, Hayat T, Kasaeian A, Pop I. Recent advances in modeling and simulation of nanofluid flows—part II: applications. Phys Rep. 2019;791:1–59.CrossRefGoogle Scholar
  10. 10.
    Sivasankaran S, Sivakumar V, Hussein AK. Numerical study on mixed convection in an inclined lid-driven cavity with discrete heating. Int Commun Heat Mass Transf. 2013;46:112–25.CrossRefGoogle Scholar
  11. 11.
    Sivasankaran S, Sivakumar V, Hussein AK, Prakash P. Mixed convection in a lid-driven two-dimensional square cavity with corner heating and internal heat generation. Numer Heat Transf Part A. 2014;65:269–86.CrossRefGoogle Scholar
  12. 12.
    Ismael M, Ghalib H. Double diffusive natural convection in a partially layered cavity with inner solid conductive body. Sci Iranica B. 2018;25(5):2643–59.Google Scholar
  13. 13.
    Bhuvaneswari M, Eswaramoorthi S, Sivasankaran S, Hussein AK. Cross-diffusion effects on MHD mixed convection over a stretching surface in a porous medium with chemical reaction and convective condition. Eng Trans. 2019;67(1):3–19.Google Scholar
  14. 14.
    Hussein AK, Hussain S. Mixed convection through a lid-driven air-filled square cavity with a hot wavy wall. Int J Mech Mater Eng (IJMME). 2010;5(2):222–35.Google Scholar
  15. 15.
    Saha S, Hussein AK, Saha G, Hussain S. Mixed convection in a tilted lid-driven square enclosure with adiabatic cylinder at the center. Int J Heat Technol. 2011;29(1):143–56.Google Scholar
  16. 16.
    Gangawane K, Oztop H, Abu-Hamdeh N. Mixed convection characteristic in a lid-driven cavity containing heated triangular block: effect of location and size of block. Int J Heat Mass Transf. 2018;124:860–75.CrossRefGoogle Scholar
  17. 17.
    Chakravarty A, Datta P, Ghosh K, Sen S, Mukhopadhyay A. Mixed convective heat transfer in an enclosure containing a heat generating porous bed under the influence of bottom injection. Int J Heat Mass Transf. 2018;117:645–57.CrossRefGoogle Scholar
  18. 18.
    Taghizadeh S, Asaditaheri A. Heat transfer and entropy generation of laminar mixed convection in an inclined lid driven enclosure with a circular porous cylinder. Int J Therm Sci. 2018;134:242–57.CrossRefGoogle Scholar
  19. 19.
    Alsabery A, Tayebi T, Chamkha A, Hashim I. Effect of rotating solid cylinder on entropy generation and convective heat transfer in a wavy porous cavity heated from below. Int Commun Heat Mass Transf. 2018;95:197–209.CrossRefGoogle Scholar
  20. 20.
    Mahalakshmi T, Nithyadevi N, Oztop H, Abu-Hamdeh N. MHD mixed convective heat transfer in a lid-driven enclosure filled with Ag-water nanofluid with center heater. Int J Mech Sci. 2018;142–143:407–19.CrossRefGoogle Scholar
  21. 21.
    Yu Q, Xu H, Liao S. Analysis of mixed convection flow in an inclined lid-driven enclosure with Buongiorno’s nanofluid model. Int J Heat Mass Transf. 2018;126:221–36.CrossRefGoogle Scholar
  22. 22.
    Zhou W, Yan Y, Liu X, Chen H, Liu B. Lattice Boltzmann simulation of mixed convection of nanofluid with different heat sources in a double lid-driven cavity. Int Commun Heat Mass Transf. 2018;97:39–46.CrossRefGoogle Scholar
  23. 23.
    Mamourian M, Milani Shirvan K, Ellahi R, Rahimi A. Optimization of mixed convection heat transfer with entropy generation in a wavy surface square lid-driven cavity by means of Taguchi approach. Int J Heat Mass Transf. 2016;102:544–54.CrossRefGoogle Scholar
  24. 24.
    Cho C. Heat transfer and entropy generation of mixed convection flow in Cu-water nanofluid-filled lid-driven cavity with wavy surface. Int J Heat Mass Transf. 2018;119:163–74.CrossRefGoogle Scholar
  25. 25.
    Pal S, Bhattacharyya S, Pop I. Effect of solid-to-fluid conductivity ratio on mixed convection and entropy generation of a nanofluid in a lid-driven enclosure with a thick wavy wall. Int J Heat Mass Transf. 2018;127:885–900.CrossRefGoogle Scholar
  26. 26.
    Alsabery A, Ismael M, Chamkha A, Hashim I. Numerical investigation of mixed convection and entropy generation in a wavy-walled cavity filled with nanofluid and involving a rotating cylinder. Entropy. 2018.  https://doi.org/10.3390/e20090664.CrossRefGoogle Scholar
  27. 27.
    Alsabery A, Sheremet M, Chamkha A, Hashim I. Impact of non-homogeneous nanofluid model on transient mixed convection in a double lid-driven wavy cavity involving solid circular cylinder. Int J Mech Sci. 2019;150:637–55.CrossRefGoogle Scholar
  28. 28.
    Alsabery A, Ismael M, Chamkha A, Hashim I. Mixed convection of Al2O3–water nanofluid in a double lid-driven square cavity with a solid inner insert using Buongiorno’s two-phase model. Int J Heat Mass Transf. 2018;119:939–61.CrossRefGoogle Scholar
  29. 29.
    Nayak R, Bhattacharyya S, Pop I. Effects of nanoparticles dispersion on the mixed convection of a nanofluid in a skewed enclosure. Int J Heat Mass Transf. 2018;125:908–19.CrossRefGoogle Scholar
  30. 30.
    Garmroodi M, Ahmadpour A, Talati F. MHD mixed convection of nanofluids in the presence of multiple rotating cylinders in different configurations: a two-phase numerical study. Int J Mech Sci. 2019;150:247–64.CrossRefGoogle Scholar
  31. 31.
    Hussain S, Mehmood K, Sagheer M. MHD mixed convection and entropy generation of water–alumina nanofluid flow in a double lid driven cavity with discrete heating. J Magn Magn Mater. 2016;419:140–55.CrossRefGoogle Scholar
  32. 32.
    Arani A, Ababaei A, Sheikhzadeh G, Aghaei A. Numerical simulation of double-diffusive mixed convection in an enclosure filled with nanofluid using Bejan’s heatlines and masslines. Alexandria Eng J. 2018;57:1287–300.CrossRefGoogle Scholar
  33. 33.
    Hussain S, Oztop H, Mehmood K, Abu-Hamdeh N. Effects of inclined magnetic field on mixed convection in a nanofluid filled double lid-driven cavity with volumetric heat generation or absorption using finite element method. Chin J Phys. 2018;56:484–501.CrossRefGoogle Scholar
  34. 34.
    Sheremet M, Roşca N, Roşca A, Pop I. Mixed convection heat transfer in a square porous cavity filled with a nanofluid with suction/injection effect. Comput Math Appl. 2018;76:2665–77.CrossRefGoogle Scholar
  35. 35.
    Gibanov N, Sheremet M, Oztop H, Abu-Hamdeh N. Mixed convection with entropy generation of nanofluid in a lid-driven cavity under the effects of a heat-conducting solid wall and vertical temperature gradient. Eur J Mech B Fluids. 2018;70:148–59.CrossRefGoogle Scholar
  36. 36.
    Rajarathinam M, Nithyadevi N, Chamkha A. Heat transfer enhancement of mixed convection in an inclined porous cavity using Cu-water nanofluid. Adv Powder Technol. 2018;29:590–605.CrossRefGoogle Scholar
  37. 37.
    Astanina M, Sheremet M, Oztop H, Abu-Hamdeh N. Mixed convection of Al2O3–water nanofluid in a lid-driven cavity having two porous layers. Int J Heat Mass Transf. 2018;118:527–37.CrossRefGoogle Scholar
  38. 38.
    Xu H, Xing Z, Wang F, Cheng Z. Review on heat conduction, heat convection, thermal radiation and phase change heat transfer of nanofluids in porous media: fundamentals and applications. Chem Eng Sci. 2019;195:462–83.CrossRefGoogle Scholar
  39. 39.
    Kareem A, Mohammed H, Hussein AK, Gao S. Numerical investigation of mixed convection heat transfer of nanofluids in a lid-driven trapezoidal cavity. Int Commun Heat Mass Transf. 2016;77:195–205.CrossRefGoogle Scholar
  40. 40.
    Chamkha A, Ismael M. Magnetic field effect on mixed convection in lid-driven trapezoidal cavities filled with a Cu-water nanofluid with an aiding or opposing side wall. J Therm Sci Eng Appl. 2016;8:031009-1–-12.CrossRefGoogle Scholar
  41. 41.
    Selimefendigil F, Oztop H. Modeling and optimization of MHD mixed convection in a lid-driven trapezoidal cavity filled with alumina-water nanofluid: effects of electrical conductivity models. Int J Mech Sci. 2018;136:264–78.CrossRefGoogle Scholar
  42. 42.
    Siavashi M, Bahrami H, Aminian E. Optimization of heat transfer enhancement and pumping power of a heat exchanger tube using nanofluid with gradient and multi-layered porous foams. Appl Therm Eng. 2018;138:465–74.CrossRefGoogle Scholar
  43. 43.
    Bozorg M, Siavashi M. Two-phase mixed convection heat transfer and entropy generation analysis of a non-Newtonian nanofluid inside a cavity with internal rotating heater and cooler. Int J Mech Sci. 2019;151:842–57.CrossRefGoogle Scholar
  44. 44.
    Asiaei S, Zadehkafi A, Siavashi M. Multi-layered porous foam effects on heat transfer and entropy generation of nanofluid mixed convection inside a two-sided lid-driven enclosure with internal heating. Transp Porous Med. 2019;126(1):223–47.CrossRefGoogle Scholar
  45. 45.
    Siavashi M, Rostami A. Two-phase simulation of non-Newtonian nanofluid natural convection in a circular annulus partially or completely filled with porous media. Int J Mech Sci. 2017;133:689–703.CrossRefGoogle Scholar
  46. 46.
    Toosi M, Siavashi M. Two-phase mixture numerical simulation of natural convection of nanofluid flow in a cavity partially filled with porous media to enhance heat transfer. J Mol Liq. 2017;238:553–69.CrossRefGoogle Scholar
  47. 47.
    Siavashi M, Yousofvand R, Rezanejad S. Nanofluid and porous fins effect on natural convection and entropy generation of flow inside a cavity. Adv Powder Technol. 2018;29:142–56.CrossRefGoogle Scholar
  48. 48.
    Siavashi M, Iranmehr S. Using sharp wedge-shaped porous media in front and wake regions of external nanofluid flow over a bundle of cylinders. Int J Numer Methods Heat Fluid Flow. 2019;29(10):3730–55.  https://doi.org/10.1108/HFF-10-2018-0575 CrossRefGoogle Scholar
  49. 49.
    Norouzi A, Siavashi M, Oskouei M. Efficiency enhancement of the parabolic trough solar collector using the rotating absorber tube and nanoparticles. Renew Energy. 2020; 145:569–584.CrossRefGoogle Scholar
  50. 50.
    Selimefendigil F, Oztop H. Corrugated conductive partition effects on MHD free convection of CNT-water nanofluid in a cavity. Int J Heat Mass Transf. 2019;129:265–77.CrossRefGoogle Scholar
  51. 51.
    Selimefendigil F, Chamkha A. Magnetohydrodynamics mixed convection in a lid-driven cavity having a corrugated bottom wall and filled with a non-Newtonian power-law fluid under the influence of an inclined magnetic field. J Therm Sci Eng Appl. 2016;8(2):1–8.CrossRefGoogle Scholar
  52. 52.
    Selimefendigil F, Oztop H. Conjugate mixed convection of nanofluid in a cubic enclosure separated with a conductive plate and having an inner rotating cylinder. Int J Heat Mass Transf. 2019;139:1000–17.CrossRefGoogle Scholar
  53. 53.
    Selimefendigil F, Oztop H. Effects of an inner stationary cylinder having an elastic rod-like extension on the mixed convection of CNT-water nanofluid in a three dimensional vented cavity. Int J Heat Mass Transf. 2019;137:650–68.CrossRefGoogle Scholar
  54. 54.
    Selimefendigil F, Ismael M, Chamkha A. Mixed convection in superposed nanofluid and porous layers in square enclosure with inner rotating cylinder. Int J Mech Sci. 2017;124–125:95–108.CrossRefGoogle Scholar

Copyright information

© Akadémiai Kiadó, Budapest, Hungary 2019

Authors and Affiliations

  1. 1.College of Engineering, Mechanical Engineering DepartmentUniversity of BabylonBabylon City, HillaIraq
  2. 2.College of Engineering, Mechanical Engineering DepartmentUniversity of Ha’ilHa’il CitySaudi Arabia
  3. 3.Laboratoire de Métrologie et des Systèmes Énergétiques, École Nationale d’IngénieursUniversity of MonastirMonastirTunisia

Personalised recommendations