Advertisement

Journal of Thermal Analysis and Calorimetry

, Volume 138, Issue 3, pp 2131–2143 | Cite as

Solidification influence in the control of inoculation effects in ductile cast irons by thermal analysis

  • Ana Maria Cojocaru
  • Iulian Riposan
  • Stelian StanEmail author
Article
  • 30 Downloads

Abstract

Slightly hypoeutectic ductile irons (4.10–4.2%CE) have a specific response to inoculation, which slightly decreased the temperature of the start of austenite formation (TAL), quickened up the start of eutectic freezing (nucleation) and increased the lowest and the highest (recalescence) eutectic temperatures. Temperature of the end of solidification increasing, with more negative level of the minimum value of the first derivative of cooling curve on the end of solidification, illustrates the efficiency of the applied inoculation to control the latter part of solidification. Increased graphitization factor, illustrating the graphite formation in the second part of eutectic reaction, sustains also the positive effect of inoculation. Inoculated irons show lower cooling rate for all of specific intervals than un-inoculated irons, with increasing tendency from beginning to the end of solidification, as specific values and also as difference between un- and inoculated irons. Inoculation potential, as ratio between the level of one specific parameter in inoculated and un-inoculated irons, has specific position, for each thermal analysis parameter, increasing from the beginning to the end of solidification. This treatment is useful not only to improve some metallurgical events at the beginning of solidification (carbide to graphite transition, graphite morphology control, eutectic cells count) but also it must be capitalized to control the last part of solidification, when the integrity of castings is decided.

Keywords

Ductile cast iron Solidification Thermal analysis Cooling curve analysis Inoculation Eutectic under-cooling Graphitization factor Inoculation potential 

Notes

Funding

Funding was provided by Unitatea Executiva pentru Finantarea Invatamantului Superior, a Cercetarii, Dezvoltarii si Inovarii (Grant No. 115PED; PN-III-P2-2.1-PED-2016-1793).

References

  1. 1.
    Upadhya KG, Stefanescu DM, Lieu K, Yeager DP. Computer-aided cooling curve analysis: principles and applications in metal casting. AFS Trans. 1989;97:61–6.Google Scholar
  2. 2.
    Barlow JO, Stefanescu DM. Computer-aided cooling curve analysis revisited. AFS Trans. 1997;104:349–54.Google Scholar
  3. 3.
    Stefanescu DM. Thermal analysis-theory and applications in metal casting. Int J Metalcasting. 2015;9(1):7–22.CrossRefGoogle Scholar
  4. 4.
    Emadi D, Whiting LV, Nafisi S, Ghomashchi R. Applications of thermal analysis in quality control of solidification processes. J Therm Anal Calorim. 2005;81:235–42.CrossRefGoogle Scholar
  5. 5.
    Dioszegi A, Svensson IL. On the problems of thermal analysis of solidification. Mater Sci Eng, A. 2005;413–414:474–9.CrossRefGoogle Scholar
  6. 6.
    Sillen RV. Novacast technologies. 2006. www.novacast.se.
  7. 7.
    Sparkman D. Microstructure by Thermal Analysis. AFS Trans. 2011;119:413–9.Google Scholar
  8. 8.
    Kanno T, Nakae H. Prediction of graphite types and mechanical properties in cast iron using three cups thermal analysis. J JFS. 2000;72:175–80.Google Scholar
  9. 9.
    Stan S, Chisamera M, Riposan I, Barstow M. Applications of thermal analysis to monitor the quality of hypo-eutectic cast irons during solidification in sand and metal moulds. J Therm Anal Calorim. 2012;110(3):1185–92.CrossRefGoogle Scholar
  10. 10.
    Riposan I, Chisamera M, Stan S. Application of cooling curve analysis in solidification pattern and structure control of grey cast irons. J Therm Anal Calorim. 2018;132:1017–28.CrossRefGoogle Scholar
  11. 11.
    Ojo SS, Riposan I. Alloy selection for in the mould inoculation to control chill width in ductile iron. Mater Sci Technol. 2012;28(5):576–81.CrossRefGoogle Scholar
  12. 12.
    Zhao H, Liu B. Modelling of stable and metastable eutectic transformation of spheroidal graphite iron casting. ISIJ Int. 2001;41(9):986–91.CrossRefGoogle Scholar
  13. 13.
    Riposan I, Chisamera M, Stan S, White D. Role of residual aluminium in ductile iron solidification. AFS Trans. 2007;115:423–33.Google Scholar
  14. 14.
    Chisamera M, Riposan I, Stan S, White D. Influence of residual aluminium on solidification pattern of ductile iron. Int J Cast Met Res. 2009;22(7):401–10.CrossRefGoogle Scholar
  15. 15.
    Riposan I, Chisamera M, Stan S, Toboc P, Grasmo G, White D, Ecob C, Hartung C. Benefits of residual aluminium in ductile iron. J Mater Eng Perform. 2011;20(1):57–64.CrossRefGoogle Scholar
  16. 16.
    Kanno T, Iwami Y, Kang I. Prediction of graphite nodule count and shrinkage tendency in ductile cast iron with 1 cup thermal analysis. J Metalcasting. 2017;11(1):94–100.CrossRefGoogle Scholar
  17. 17.
    Regordosa A, Llorca-Isern N. Microscopic characterization of different shrinkage defects in ductile irons and their relation with composition and inoculation process. Int J Metalcasting. 2017;11(4):778–89.CrossRefGoogle Scholar
  18. 18.
    Li WZ, Liu BC, Li JR. Shrinkage behaviour of spheroidal graphite cast iron in green and dry sand moulds for the benchmarking of solidification simulation. J Mater Sci Technol. 2001;17(6):610–4.Google Scholar
  19. 19.
    Chisamera M, Riposan I, Stan S, Toboc P, Skaland T, White D. Shrinkage evaluation in ductile iron as influenced by mould media and inoculant type. Int J Cast Metal Res. 2011;24(1):28–36.CrossRefGoogle Scholar
  20. 20.
    Stan S, Riposan I, Chisamera M, Barstow M. Solidification pattern of silicon alloyed ductile cast irons. In: Proceedings of the 122nd American foundry society metalcasting congress, April 2018, Fort Worth, TX, USA, Paper 18-022.Google Scholar
  21. 21.
    Stan S, Riposan I, Chisamera M, Stan I. Solidification characteristics of silicon alloyed ductile cast irons. J Mater Eng Perform. 2019;28(1):278–86.CrossRefGoogle Scholar
  22. 22.
    Dawson S, Popelar P. Thermal analysis and process control for compacted graphite iron and ductile iron. In: Proceedings of the 2013 Keith Millis symposium on ductile iron, Nashville, TN, USA, 2013; p. 59–65.Google Scholar
  23. 23.
    Kanno T, Fukuda Y, Morinaka M, Nakae H. Effect of alloying elements on graphite and cementite eutectic temperature of cast iron. J. JFS. 1998;70:465–70.Google Scholar
  24. 24.
    Stan S, Chisamera M, Riposan I, Stefan E, Neacsu L, Cojocaru AM, Stan I. Integrated system of thermal/dimensional analysis for quality control of gray and ductile iron castings solidification. J Metalcasting. 2019;13(3):653–65.CrossRefGoogle Scholar
  25. 25.
    Riposan I, Stan S, Chisamera M, Neacsu L, Cojocaru AM, Stefan E, Stan I. Control of solidification pattern of cast irons by simultaneous thermal and contraction/expansion analysis. In: IOP conference series: materials science and engineering 529 (2019) 012016 (6PAGES).  https://doi.org/10.1088/1757-899x/1/012016.

Copyright information

© Akadémiai Kiadó, Budapest, Hungary 2019

Authors and Affiliations

  • Ana Maria Cojocaru
    • 1
  • Iulian Riposan
    • 1
  • Stelian Stan
    • 1
    Email author
  1. 1.Politehnica University of BucharestBucharestRomania

Personalised recommendations