Advertisement

Application and research progress of cold storage technology in cold chain transportation and distribution

  • Yi Zhao
  • Xuelai ZhangEmail author
  • Xiaofeng Xu
Article
  • 7 Downloads

Abstract

This paper reviews the application and research of cold storage technology in cold chain transportation and distribution and points out the research prospects of transportation equipment and the problems that need to be solved. The advantages and disadvantages of refrigerated containers, refrigerated trucks and insulation box of cold storage were compared and analyzed. Three types of cold storage devices are applied to the cold chain logistics to achieve efficient and economical cold chain distribution systems. Because of its high energy storage density, phase change materials have become a research hot spot in the field of energy storage. Therefore, phase change cold storage materials have great potential applications in cold chain transportation and distribution. The performance improvement of cold storage materials, rational design of storage tanks, and simulation of temperature field under the influence of different factors in cold storage equipment should be the focus of future research on cold storage transportation and distribution.

Keywords

Cool storage technology Phase change material Refrigerated container Refrigerated truck Insulation box of cold storage 

Notes

Acknowledgements

Thanks for this project funding: China’s focus on special focus on research and development plan (2018YFD0401300), Shanghai Municipal Science and Technology Project (16040501600).

References

  1. 1.
    Fu Y, Wang D, Zhu H. Review on low temperature phase change materials and its application. Mater Rev. 2016;30(S6):222–6.Google Scholar
  2. 2.
    Liu G. Food losses and food waste in China: a first estimate. OECD food, agriculture and fisheries papers, vol. 66. Paris: OECD Publishing; 2014.  https://doi.org/10.1787/5jz5sq5173lq-en.Google Scholar
  3. 3.
    Huang Y, Zhang X. Research progress of the application of cold storage technology in food cold chain logistics. Packag Eng. 2015;15:23–9.Google Scholar
  4. 4.
    Gracia AD, Cabeza LF. Phase change materials and thermal energy storage for buildings. Energy Build. 2015;103:414–9.Google Scholar
  5. 5.
    Dong K, Guan H, Liu Y, et al. Building energy-saving phase change materials of methyl palmitate/methyl stearate. Adv New Energy. 2017;5(3):212–7.Google Scholar
  6. 6.
    Cabeza LF, Castell A, Barreneche C, et al. Materials used as PCM in thermal energy storage in buildings: a review. Renew Sustain Energy Rev. 2011;15(3):1675–95.Google Scholar
  7. 7.
    Souayfane F, Fardoun F, Biwole PH. Phase change materials (PCM) for cooling applications in buildings: a review. Energy Build. 2016;129:396–431.Google Scholar
  8. 8.
    Zhou Z, Zhang Z, Zuo J, et al. Phase change materials for solar thermal energy storage in residential buildings in cold climate. Renew Sustain Energy Rev. 2015;48:692–703.Google Scholar
  9. 9.
    Xu B, Li P, Chan C. Application of phase change materials for thermal energy storage in concentrated solar thermal power plants: a review to recent developments. Appl Energy. 2015;160:286–307.Google Scholar
  10. 10.
    Ma G, Shang L, Xie S, et al. Binary eutectic mixtures of stearic acid-n-butyramide/n-octanamide as phase change materials for low temperature solar heat storage. Appl Therm Eng. 2017;111:1052–9.Google Scholar
  11. 11.
    Yan Y, Zou Z, Li K. Application of solar phase change thermal storage system in greenhouse heating. J China Agric Univ. 2016;21(5):139–46.Google Scholar
  12. 12.
    Kahwaji S, Johnson MB, Kheirabadi AC, et al. Fatty acids and related phase change materials for reliable thermal energy storage at moderate temperatures. Sol Energy Mater Sol Cells. 2017;167:109–20.Google Scholar
  13. 13.
    Carson JK, East AR. The cold chain in New Zealand—a review. Int J Refrig. 2017;87:185–92.Google Scholar
  14. 14.
    Murillo DC. Refrigerated container versus bulk: evidence from the banana cold chain. Marit Policy Manag. 2015;42(3):228–45.Google Scholar
  15. 15.
    Ming L, Saman W, Bruno F. Review on storage materials and thermal performance enhancement techniques for high temperature phase change thermal storage systems. Renew Sustain Energy Rev. 2012;16(4):2118–32.Google Scholar
  16. 16.
    Zhang D, Wang J, Lin Y, et al. Present situation and future prospect of renewable energy in China. Renew Sustain Energy Rev. 2017;76:865–71.Google Scholar
  17. 17.
    Adewuyi AO, Awodumi OB. Renewable and non-renewable energy-growth-emissions linkages: review of emerging trends with policy implications. Renew Sustain Energy Rev. 2017;69:275–91.Google Scholar
  18. 18.
    Zhu Z, Zhang X, Yu J. Nano cool-storage material and cold-chain logistics of fresh agriculture products. China Fruit Veg. 2014;34(6):14–8.Google Scholar
  19. 19.
    Xiaofeng X, Xuelai Z, Jianjun W. Simulation of temperature field of cold storage refrigerated trucks under different environmental temperatures. Cryog Supercond. 2018;46(02):65–9.Google Scholar
  20. 20.
    Pielichowska K, Pielichowski K. Phase change materials for thermal energy storage. Prog Mater Sci. 2014;65:67–123.Google Scholar
  21. 21.
    Xia M, Yuan Y, Zhao X, et al. Cold storage condensation heat recovery system with a novel composite phase change material. Appl Energy. 2016;175:259–68.Google Scholar
  22. 22.
    Zhang X, Chen Y, Zeng T, et al. Development of phase change materials for pharmaceutical cold chain logistics. Refrig Air Cond. 2017;17(7):43–6.Google Scholar
  23. 23.
    Zhang N, Yuan Y, Cao X, et al. Latent heat thermal energy storage systems with solid–liquid phase change materials: a review. Adv Eng Mater. 2018;20:1700753.Google Scholar
  24. 24.
    Veerakumar C, Sreekumar A. Phase change material based cold thermal energy storage: materials, techniques and application—a review. Int J Refrig. 2016;67:271–89.Google Scholar
  25. 25.
    Assis E, Katsman L, Ziskind G, et al. Numerical and experimental study of melting in a spherical shell. Int J Heat Mass Transf. 2007;50(9):1790–804.Google Scholar
  26. 26.
    Teng TP, Cheng CM, Cheng CP. Performance assessment of heat storage by phase change materials containing MWCNTs and graphite. Appl Therm Eng. 2013;50(1):637–44.Google Scholar
  27. 27.
    Karaipekli A, Sarı A, Kaygusuz K. Thermal conductivity improvement of stearic acid using expanded graphite and carbon fiber for energy storage applications. Renew Energy. 2007;32(13):2201–10.Google Scholar
  28. 28.
    Wang Y, Li L, Douville C, et al. Evaluation of liquid from the Papanicolaou test and other liquid biopsies for the detection of endometrial and ovarian cancers. Sci Transl Med. 2018;10(433):eaap8793.Google Scholar
  29. 29.
    Kim TY, Hyun B-S, Lee J-J, Rhee J. Numerical study of the spacecraft thermal control hardware combining solid–liquid phase change material and a heat pipe. Aerosp Sci Technol. 2013;27:10–6.Google Scholar
  30. 30.
    Xuelai Z, Xiaofeng X, Sunxi Z, Yinghui W, Wei L, Sheng L. Research progress of cold storage technology in cold chain logistics. Refrig Air Cond. 2017;17(12):88–92.Google Scholar
  31. 31.
    Yu Y, Jing Q, Sun Y. Research progress of low temperature phase change energy storage materials. Chem Ind Eng Prog. 2010;29(5):896–900.Google Scholar
  32. 32.
    Sharma A, Tyagi VV, Chen CR, et al. Review on thermal energy storage with phase change materials and applications. Renew Sustain Energy Rev. 2009;13(2):318–45.Google Scholar
  33. 33.
    Joshi A, Butola BS. Studies on nonisothermal crystallization of HDPE/POSS nanocomposites. Polymer. 2004;45(14):4953–68.Google Scholar
  34. 34.
    Zhang X, Xu W, Liu T, et al. Preparation and properties of lauric acid-citrate/tetradecane-dodecane composite phase change energy storage materials. J Refrig. 2016;1:60–4.Google Scholar
  35. 35.
    Chen J, Xu T, Fang X, et al. Properties of expanded graphite dodecane composite phase change cool storage materials. J Eng Thermophys. 2015;6:1307–10.Google Scholar
  36. 36.
    Liu S, Fan Z, et al. A composite phase change cold storage material for cold storage and preservation. Chinese patent 106675526A, 17 May 2017.Google Scholar
  37. 37.
    Xu X, Zhang X, Liu S. Experimental study on cold storage box with nanocomposite phase change material and vacuum insulation panel. Int J Energy Res. 2018;42:4429–38.Google Scholar
  38. 38.
    Xu X, Zhang X, Zhou S, Wang Y, Lu L. Experimental and application study of Na2SO4·10H2O with additives for cold storage. J Therm Anal Calorim. 2019.  https://doi.org/10.1007/s10973-018-7633-9.Google Scholar
  39. 39.
    Fan G, Zhang W, et al. A phase change cold storage device. Chinese patent 204694132U, 7 Oct 2015.Google Scholar
  40. 40.
    Ge L, Yu S, et al. A high-precision liquid-cooled flow mixing temperature control device and method based on phase change cold storage mechanism. Chinese patent 106705540A, 24 May 2017.Google Scholar
  41. 41.
    Qu Z, Gu Y, et al. Phase change cold storage device and cooling system adopted. Chinese patent 106352726A, 25 Jan 2017.Google Scholar
  42. 42.
    Weng L, Zhao W, et al. A phase change cold storage system. Chinese patent 206583015U, 24 Oct 2017.Google Scholar
  43. 43.
    Wang S. Mechanical refrigeration and refrigerated container transportation. Beijing: China Communications Press; 2005. p. 7–10.Google Scholar
  44. 44.
    Li S. Development of railway refrigerated transport tools from the perspective of freight modernization. Railw Veh. 2002;40(12):12–3.Google Scholar
  45. 45.
    Shi Z. Refrigerated container and its cold consumption. China Port. 2002;6:43.Google Scholar
  46. 46.
    Li M. Research on internal flow field and air supply form of reefer container. Tianjin: Tianjin University of Commerce; 2015. p. 2–5.Google Scholar
  47. 47.
    Ho SH, Rosario L, Rahman MM. Numerical simulation of temperature and velocity in a refrigerated warehouse. Int J Refrig. 2010;33(5):1015–25.Google Scholar
  48. 48.
    Rodriguez-Bermejo J, Barreiro P, Robla JI, et al. Thermal study of a transport container. J Food Eng. 2007;80(2):517–27.Google Scholar
  49. 49.
    Moureh J, Tapsoba S, Derens E, et al. Air velocity characteristics within vented pallets loaded in a refrigerated vehicle with and without air ducts. Int J Refrig. 2009;32(2):220–34.Google Scholar
  50. 50.
    Yu G. Numerical simulation and analysis of refrigerated containers. Shanghai: Shanghai Maritime University; 2005. p. 36–58.Google Scholar
  51. 51.
    Zhang Y, Chen J, Chen Y, et al. Simulation of airflow organization inside mechanical refrigerated car body. Refrig Air Cond Electr Mach. 2007;28(2):10–3.Google Scholar
  52. 52.
    Liu C, Zhou G. Design and numerical simulation of uniform air supply duct in cold storage room. J Zhejiang Ocean Univ (Nat Sci). 2010;29(4):356–9.Google Scholar
  53. 53.
    Alptekin E, Ezan MA, Kayansayan N. Flow and heat transfer characteristics of an empty refrigerated container. In: Dincer I, Midilli A, Kucuk H, editors. Progress in exergy, energy, and the environment. Cham: Springer; 2014. p. 641–52.Google Scholar
  54. 54.
    Weng W, Fang D, Li Q, et al. Study on temperature field uniformity control of refrigerated transport cabin. Trans Chin Soc Agric Mach. 2014;45(1):228–35.Google Scholar
  55. 55.
    Tian J, Zhang Z, Li M, et al. Experimental study on temperature field inside refrigerated containers. J Fluid Mech. 2016;44(6):56–60.Google Scholar
  56. 56.
    Guo Z, Kan A, Yang F, et al. Temperature distribution inside reefer container equipped with vacuum insulation panels. J Nanjing Univ Aeronaut Astronaut. 2017;49(1):29–33.Google Scholar
  57. 57.
    Zhai Z, Cao D, Yan A, et al. Study on the characteristics of internal temperature field of refrigerated containers. Refrigeration. 2013;32(1):23–5.Google Scholar
  58. 58.
    Liu Y, Yang X, Zhuang C, et al. Effects of stack method of garden stuff on temperature field inside mechanical refrigerated container. J Logist Eng Univ. 2015;31(6):67–72.Google Scholar
  59. 59.
    Zhang Z, Hao J, Li M, et al. Theoretical and experimental study on temperature field inside refrigerated containers. Cryog Supercond. 2016;6:76–80.Google Scholar
  60. 60.
    Li D, Han H, Ji W, et al. Experimental study on temperature field distribution in refrigerated containers. Mech Electr Equip. 2006;23(6):52–6.Google Scholar
  61. 61.
    He K, Zhuang C, Yang X, et al. Influence of air supply relative humidity on temperature and humidity field in reefer container. J Ordnance Equip Eng. 2017;10:103–9.Google Scholar
  62. 62.
    Alptekin A, Eazn MA. Flow and heat transfer characteristics an empty refrigerated container. Prog Energy Environ. 2014;62(1):641–52.Google Scholar
  63. 63.
    Wu Y, Shen L, et al. A cold chain intelligent cold storage box distribution system. Chinese patent 103994789A, 20 Aug 2014.Google Scholar
  64. 64.
    Meng Q. Research on the layout and performance of vacuum insulation panels for marine refrigerated containers. Xiamen: Jimei University; 2015. p. 4–6.Google Scholar
  65. 65.
    Wang W, Yang S, Yan S. Development status of China’s fruit and vegetable cold chain and main ways of energy saving and consumption reduction. Preserv Process. 2016;16(2):1–5.Google Scholar
  66. 66.
    Defraeye T, Nicolai B, Kirkman W, et al. Integral performance evaluation of the fresh-produce cold chain: a case study for ambient loading of citrus in refrigerated containers. Postharvest Biol Technol. 2016;112:1–13.Google Scholar
  67. 67.
    Zhang B, Yang J, Cao G, et al. Development of micro-environment detection and control system for refrigerated containers. Microcontrol Embed Syst. 2016;16(1):29–32.Google Scholar
  68. 68.
    Sepe R, Pozzi A, Armentani E. Development and stress behavior of an innovative refrigerated container with PCM for fresh and frozen goods. Multidiscip Model Mater Struct. 2015;11(2):142003.Google Scholar
  69. 69.
    Sun J, Hou Y, Chi W, et al. Optimization design of cold chain transportation organization and process of railway reefer container. Railw Freight Transp. 2012;11:23–8.  https://doi.org/10.3969/j.issn.1004-20242012.11.006.Google Scholar
  70. 70.
    Guo Z, Yan A, Meng W, et al. Research status and prospects of energy saving technology for ship reefer containers. Refrig Technol. 2016;36(3):53–9.Google Scholar
  71. 71.
    Yang M, Wang Y, Fu Y, et al. Numerical calculation of temperature field in ice-room and safe-room for domestic refrigerator. J Refrig. 1991;4:1–8 (in Chinese with English abstract).Google Scholar
  72. 72.
    Ren Z, Zhang Y, Chen X, et al. Research progress of road refrigerated car technology. Refrig Air Cond (Beijing). 2018;18(3):61–5.Google Scholar
  73. 73.
    Xia Q, Liu B, Song X. Design and experimental verification of a new type of refrigerated vehicle model. J Refrig. 2014;4:108–12.Google Scholar
  74. 74.
    Ming L, Wasim S. Development of a novel refrigeration system for refrigerated trucks incorporating phase change material. Appl Energy. 2012;92:336–42.Google Scholar
  75. 75.
    Ahmed M, Meade O. Reducing heat transfer across the insulated walls of refrigerated truck trailers by the application of phase change materials. Energy Convers Manag. 2010;51:383–92.Google Scholar
  76. 76.
    Xie R, Tang H, Tao W, et al. Optimization of cold plate layout for refrigerated trucks based on no-load temperature field simulation and test. Trans Chin Soc Agric Eng. 2017;33:290–8.Google Scholar
  77. 77.
    Zou T, Zou G, et al. A cold storage plate for refrigerated transport. Chinese patent 206633892U, 14 Nov 2017.Google Scholar
  78. 78.
    Huang R, Li X, Miao X, et al. Numerical simulation of temperature field of PCM cool storage plate refrigerator. Refrig Technol. 2018;1.Google Scholar
  79. 79.
    Zhang Z, Guo Y, Tian J, et al. Numerical simulation and experiment of temperature field distribution in box of cold plate refrigerated truck. Trans Chin Soc Agric Eng. 2013;29(25):18–24.Google Scholar
  80. 80.
    Wang A. Numerical study of flow field and temperature field in refrigerated truck based on CFD. Jinan: Shandong University; 2017.Google Scholar
  81. 81.
    Zhang D, Lu E, Lu H, et al. Experimental study on temperature field distribution characteristics of fresh-keeping transport vehicles. Trans Chin Soc Agric Eng. 2012;28(11):254–60.Google Scholar
  82. 82.
    Zhao C, Han J, Yang X, et al. Numerical simulation of temperature field distribution in refrigerated truck based on CFD. Trans Chin Soc Agric Mach. 2013;44(11):168–73.Google Scholar
  83. 83.
    Sun Y. The Thermal performance of refrigerated trucks and the development of vacuum insulation materials. Guangzhou: Guangzhou University; 2011.Google Scholar
  84. 84.
    Yin S, Zhang Y, et al. Cold storage truck. Chinese patent 206235067U, 9 June 2017.Google Scholar
  85. 85.
    Da W, Ping L, Lianwen J, et al. Study on the effect of different insulation materials on the storage and quality of peach storage and cooling. Food Sci Technol. 2018;2:58–63.Google Scholar
  86. 86.
    Navaranjan N, Fletcher GC, Summers G, et al. Thermal insulation requirements and new cardboard packaging for chilled seafood exports. J Food Eng. 2013;119(3):395–403.Google Scholar
  87. 87.
    ASTM International. ASTM D3103-07 standard test method for thermal insulation performance of distribution packages. West Conshohocken: ASTM; 2014.Google Scholar
  88. 88.
    Gao E, Jing H. Research on fresh-keeping technology of cold chain transportation for tomatoes. Refrig Technol. 2014;34(5):49–53.Google Scholar
  89. 89.
    Feng Z. Research on refrigerated distribution technology of mixed storage using cooling thermostat. Logist Technol. 2005;7:32–4.Google Scholar
  90. 90.
    Pan X, Wang D, Zhu H. Influence of thermal insulation materials on temperature field in incubator. Food Mach. 2018;34(08):115–8.Google Scholar
  91. 91.
    Abhat A. Low temperature latent heat thermal energy storage: heat storage materials. Sol Energy. 1983;30(4):313–32.Google Scholar
  92. 92.
    Lane DG. Low temperature heat storage with phase change materials. Int J Ambient Energy. 1980;1(3):155–68.Google Scholar
  93. 93.
    Kenisarin MM. High-temperature phase change materials for thermal energy storage. Renew Sustain Energy Rev. 2010;14(3):955–70.Google Scholar
  94. 94.
    Zhao CY, Zhang GH. Review on microencapsulated phase change materials (MEPCMs): fabrication, characterization and applications. Renew Sustain Energy Rev. 2011;15(8):3813–32.Google Scholar
  95. 95.
    Kenisarin MM. Thermophysical properties of some organic phase change materials for latent heat storage—a review. Sol Energy. 2014;107(9):553–75.Google Scholar
  96. 96.
    Marcus Y. Thermal energy storage. Thermal Energy Storage. 2004;1(5):65–78.Google Scholar
  97. 97.
    Zalba B, Maŕın JM, Cabeza LF, Mehling H. Review on thermal energy storage with phase change: materials, heat transfer analysis and applications. Appl Therm Eng. 2003;23(3):251–83.Google Scholar
  98. 98.
    Hale M. Survey of thermal storage for parabolic trough power plants. Golden: National Renewable Energy Laboratory; 2000. p. 9.Google Scholar

Copyright information

© Akadémiai Kiadó, Budapest, Hungary 2019

Authors and Affiliations

  1. 1.Institute of Cool Thermal Storage TechnologyShanghai Maritime UniversityShanghaiChina

Personalised recommendations