Experimental research on rheological and mechanical properties of nano silica sol grout
- 7 Downloads
Nano silica sol (NSS) grouting is an effective method to improve water blocking capacity of rock fracture and fine sand. However, the mechanical and rheological properties of NSS grout remain poorly investigated. We study the properties by (1) measuring gelling time of NSS grout with a different accelerator dosage, (2) measuring shear strength of NSS with fall-cone test, (3) measuring the permeability coefficient of NSS, (4) measuring uniaxial compressive strength (UCS) of NSS mortar with different accelerator dosage and different curing conditions, and (5) conducting scanning electron microscopy (SEM) tests on NSS mortars at the sample age of 28 days. A new parameter R is introduced to represent the amount-of-substance concentration ratio of silicon dioxide (SiO2) and calcium chloride (CaCl2) in the mixture of NSS grout and the accelerator solution. It is proven that the gelling time of NSS grout increases exponentially with the increase of R. The equation of real-time viscosity and permeability length is derived. The strength development of NSS and the stress–strain relationship of NSS mortar is observed. The corresponding relationship between the micromorphology and macro-mechanical properties of NSS mortar is revealed. Furthermore, the non-monotonicity of experimental data is discussed and a possible reason is given.
The effect of NSS/accelerator volume and concentration is first unified.
The equation of real-time viscosity and real-time permeability length is first derived.
The micromorphology of NSS mortar at high magnification appears as irregular particles and gaps.
KeywordsNano silica sol grout Gelling time Real-time viscosity Real-time permeability length
This work was supported by National Key Research and Development Program (Grant number 2016YFC0600803), Natural Science Foundation of China (Grant numbers 51879150 and 51809115).
Compliance with ethical standards
Conflict of interest
The authors declare that they have no conflict of interest.
- 2.Henn RW, Soule NC (2010) Ultrafine cement in pressure grouting. American Society of Civil Engineers, RestonGoogle Scholar
- 3.Persoff PG, Finsterle S, Moridis GJ, Apps J, Pruess K (1995) Injectable barriers for waste isolation. Office of Scientific & Technical Information Technical Reports. Lawrence Berkeley Lab, CaliforniaGoogle Scholar
- 4.Moridis G, Persoff P, Apps JA, Myer L, Pruess K, Yen P (1995) A field test of permeation grouting in heterogeneous soils using a new generation of barrier liquids. Office of Scientific & Technical Information Technical Reports. Lawrence Berkeley Lab, CaliforniaGoogle Scholar
- 13.Manchester KR, North-Abbott MA, Zaluski MH, Trudnowski JM, Bickford JL (2001) Colloidal silica grout selection and characterization in support of the barrier deployment at Brookhaven National Laboratory. MSE Technology Applications, MontanaGoogle Scholar
- 23.Heping X (2017) Research framework and anticipated results of deep rock mechanics and mining theory. Adv Eng Sci 49(2):1–16Google Scholar
- 24.Funehag J (2012) Guide to Grouting with Silica Sol: For Sealing in Hard Rock. Stiftelsen Bergteknisk forskning, StockholmGoogle Scholar
- 25.Meifeng C (2002) Rock Mechanics and Engineering. Science Press, BeijingGoogle Scholar