Advertisement

Journal of Polymer Research

, 25:247 | Cite as

Effects of weathering aging on mechanical and thermal properties of injection molded glass fiber reinforced polypropylene composites

  • Lichao Yu
  • Xiaofei Yan
  • Gabriel Fortin
ORIGINAL PAPER
  • 67 Downloads

Abstract

The effect of weathering aging on the degradation behavior of injection molded short glass fiber reinforced polypropylene composites (GFPP) is studied. First, the effect of outdoor weathering on mechanical properties of GFPP composite was investigated by tensile, flexural, and impact tests. Furthermore, to clarify the degradation behavior under natural weathering environments, differential scanning calorimetry (DSC), Fourier-transform infrared spectroscopy (FTIR), and scanning electron microscopy (SEM) measurements were carried out to analyze the structural and molecular changes during weathering aging. The results show that weathering aging has a significant influence on changes in mechanical properties, melting temperature and the degree of crystallinity of PG6N1 without added carbon black and UV absorbing agent. Those degradations not only occurred on the surface of GFPP but also proceeded to the inner matrix and interface. However, GFPP GWH42 with added carbon black and UV absorbing agent shows excellent weathering stability.

Keywords

Weathering aging Degradation Polypropylene Mechanical properties 

Notes

Acknowledgments

I would like to show my deepest gratitude to Dr. YAMANE Hideki, a respectable, responsible and resourceful scholar who has provided me with valuable guidance in every stage of the writing of this paper. Furthermore, all authors declare that: (i) no support, financial or otherwise, has been received from any organization that may have an interest in the submitted work; and (ii) there are no other relationships or activities that could appear to have influenced the submitted work.

References

  1. 1.
    Han C, Sahle-Demessie E, Zhao AQ, Wang J (2018) Environmental aging and degradation of multiwalled carbon nanotube reinforced polypropylene. Carbon 129:137–151CrossRefGoogle Scholar
  2. 2.
    de Dicastillo CL, del Mar Castro-López M, López-Vilariño JM, González-Rodríguez MV (2013) Immobilization of green tea extract on polypropylene films to control the antioxidant activity in food packaging. Food Res Int 53(1):522–528CrossRefGoogle Scholar
  3. 3.
    Ellis TS, D'Angelo JS (2003) Thermal and mechanical properties of a polypropylene nanocomposite. J Appl Polym Sci 90(6):1639–1647CrossRefGoogle Scholar
  4. 4.
    Lepot N, Van Bael M, Van den Rul H, D'Haen J, Peeters R, Franco D, Mullens J (2011) Influence of incorporation of ZnO nanoparticles and biaxial orientation on mechanical and oxygen barrier properties of polypropylene films for food packaging applications. J Appl Polym Sci 120(3):1616–1623CrossRefGoogle Scholar
  5. 5.
    Vassiliou A, Bikiaris D, Chrissafis K, Paraskevopoulos K, Stavrev S, Docoslis A (2008) Nanocomposites of isotactic polypropylene with carbon nanoparticles exhibiting enhanced stiffness, thermal stability and gas barrier properties. Compos Sci Technol 68(3–4):933–943CrossRefGoogle Scholar
  6. 6.
    Celina MC (2013) Review of polymer oxidation and its relationship with materials performance and lifetime prediction. Polym Degrad Stab 98(12):2419–2429CrossRefGoogle Scholar
  7. 7.
    Richaud E, Farcas F, Bartoloméo P, Fayolle B, Audouin L, Verdu J (2006) Effect of oxygen pressure on the oxidation kinetics of unstabilised polypropylene. Polym Degrad Stab 91(2):398–405CrossRefGoogle Scholar
  8. 8.
    Pickett JE, Coyle DJ (2013) Hydrolysis kinetics of condensation polymers under humidity aging conditions. Polym Degrad Stab 98(7):1311–1320CrossRefGoogle Scholar
  9. 9.
    Azuma Y, Takeda H, Watanabe S, Nakatani H (2009) Outdoor and accelerated weathering tests for polypropylene and polypropylene/talc composites: a comparative study of their weathering behavior. Polym Degrad Stab 94(12):2267–2274CrossRefGoogle Scholar
  10. 10.
    Al-Madfa H, Mohamed Z, Kassem M (1998) Weather ageing characterization of the mechanical properties of the low density polyethylene. Polym Degrad Stab 62(1):105–109CrossRefGoogle Scholar
  11. 11.
    Chien JC, Wang D (1975) Autoxidation of polyolefins. Absolute rate constants and effect of morphology. Macromolecules 8(6):920–928CrossRefGoogle Scholar
  12. 12.
    Audouin L, Gueguen V, Tcharkhtchi A, Verdu J (1995) “Close loop” mechanistic schemes for hydrocarbon polymer oxidation. J Polym Sci A Polym Chem 33(6):921–927CrossRefGoogle Scholar
  13. 13.
    Achimsky L, Audouin L, Verdu J, Rychly J, Matisova-Rychla L (1997) On a transition at 80 C in polypropylene oxidation kinetics. Polym Degrad Stab 58(3):283–289CrossRefGoogle Scholar
  14. 14.
    Hamid SH (2000) Handbook of polymer degradation. CRC Press,Google Scholar
  15. 15.
    Tiemblo P, Gómez-Elvira J, Beltrán SG, Matisova-Rychla L, Rychly J (2002) Melting and α relaxation effects on the kinetics of polypropylene Thermooxidation in the range 80− 170° C. Macromolecules 35(15):5922–5926CrossRefGoogle Scholar
  16. 16.
    Du H, Wang W, Wang Q, Zhang Z, Sui S, Zhang Y (2010) Effects of pigments on the UV degradation of wood-flour/HDPE composites. J Appl Polym Sci 118(2):1068–1076Google Scholar
  17. 17.
    Li R (2000) Environmental degradation of wood–HDPE composite. Polym Degrad Stab 70(2):135–145CrossRefGoogle Scholar
  18. 18.
    Joseph P, Rabello MS, Mattoso L, Joseph K, Thomas S (2002) Environmental effects on the degradation behaviour of sisal fibre reinforced polypropylene composites. Compos Sci Technol 62(10–11):1357–1372CrossRefGoogle Scholar
  19. 19.
    Lundin T, Cramer SM, Falk RH, Felton C (2004) Accelerated weathering of natural fiber-filled polyethylene composites. J Mater Civ Eng 16(6):547–555CrossRefGoogle Scholar
  20. 20.
    Matuana LM, Kamdem DP (2002) Accelerated ultraviolet weathering of PVC/wood-flour composites. Polym Eng Sci 42(8):1657–1666CrossRefGoogle Scholar
  21. 21.
    Selden R, Nyström B, Långström R (2004) UV aging of poly (propylene)/wood-fiber composites. Polym Compos 25(5):543–553CrossRefGoogle Scholar
  22. 22.
    Stark NM (2006) Effect of weathering cycle and manufacturing method on performance of wood flour and high-density polyethylene composites. J Appl Polym Sci 100(4):3131–3140CrossRefGoogle Scholar
  23. 23.
    Stark NM, Matuana LM (2004) Surface chemistry and mechanical property changes of wood-flour/high-density-polyethylene composites after accelerated weathering. J Appl Polym Sci 94(6):2263–2273CrossRefGoogle Scholar
  24. 24.
  25. 25.
    Kong Y, Hay J (2003) The enthalpy of fusion and degree of crystallinity of polymers as measured by DSC. Eur Polym J 39(8):1721–1727CrossRefGoogle Scholar
  26. 26.
    Vyazovkin S, Sbirrazzuoli N (2006) Isoconversional kinetic analysis of thermally stimulated processes in polymers. Macromol Rapid Commun 27(18):1515–1532CrossRefGoogle Scholar
  27. 27.
    Brzozowska-Stanuch A, Rabiej S, Fabia J, Nowak J (2014) Changes in thermal properties of isotactic polypropylene with different additives during aging process. Polimery 59(4):302–307CrossRefGoogle Scholar
  28. 28.
    Yang X, Ding X (2006) Prediction of outdoor weathering performance of polypropylene filaments by accelerated weathering tests. Geotext Geomembr 24(2):103–109CrossRefGoogle Scholar
  29. 29.
    George G, Celina M, Vassallo A, Cole-Clarke P (1995) Real-time analysis of the thermal oxidation of polyolefins by FT-IR emission. Polym Degrad Stab 48(2):199–210CrossRefGoogle Scholar
  30. 30.
    Morlat S, Mailhot B, Gonzalez D, Gardette J-L (2004) Photo-oxidation of polypropylene/montmorillonite nanocomposites. 1. Influence of nanoclay and compatibilizing agent. Chem Mater 16(3):377–383CrossRefGoogle Scholar

Copyright information

© Springer Nature B.V. 2018

Authors and Affiliations

  1. 1.Department of Biobased Materials ScienceKyoto Institute of TechnologyKyotoJapan
  2. 2.Key Laboratory of Textile Science & Technology, Ministry of Education, College of TextilesDonghua UniversityShanghaiChina
  3. 3.Department of Advanced Fibro-ScienceKyoto Institute of TechnologyKyotoJapan

Personalised recommendations