Advertisement

Journal of Polymer Research

, 25:197 | Cite as

Asynchronous synthesis method of waterborne polyurethane with the differences of structural features and thermal conductivity

  • Rui Li
  • Zhihua Shan
ORIGINAL PAPER
  • 50 Downloads

Abstract

Waterborne polyurethane (WPU) was successfully synthesized with two ways of one-step method and two-step method, mainly focusing on the effects of asynchronous synthesis method on WPU films’ structural features and thermal conductivity. Compared to the one-step synthesis method of WPU (OS-WPU), the two-step synthesis method of WPU (TS-WPU) showed a high thermal conductivity and approximately 1.4-fold higher than OS-WPU. In addition to this, the water- and solvent-resistance properties and crystallinity of TS-WPU also displayed a better performance than that of OS-WPU. Instrumental analyses of FTIR, DSC, DMA, AFM, SEM and XRD indicated that TS-WPU had an evenly phase separation and lots of microcrystal domains, which is owing to the more ordered structures existed in hard and soft segment domains. In short, the long-range order, short-range order and microcrystal domains existed in WPU can facilitate the phonon propagation, and that is corresponding to the increasing of thermal conductivity.

Graphic abstract

Novelty: Focusing on two synthetic methods to study the structural features and thermal conductivity of WPU. Results show that WPU synthesized by two-step method displays a higher thermal conductivity, phase separation and crystallization behavior than one-step method.

Keywords

Waterborne polyurethane Synthetic methods Phase separation Thermal conductivity Structural features 

Notes

Acknowledgements

This work was supported by Administration of Quality Supervision, Inspection and Quarantine (201410110), and thanks for the continuing financial supports of our individual projects on thermal conductivity of functional waterborne polyurethane. Sincerely thanks the key laboratory of leather chemistry and engineering (Sichuan University) provides the equipment for finishing my paper.

Compliance with ethical standards

Conflict of interest

None.

References

  1. 1.
    Zargiel KA, Coogan JS, Swain GW (2011) Diatom community structure on commercially available ship hull coatings. Biofouling 27:955–965CrossRefPubMedGoogle Scholar
  2. 2.
    Madbouly SA, Otaigbe JU (2006) Kinetic analysis of fractal gel formation in waterborne polyurethane dispersions undergoing high deformation flows. Macromolecules 39:4144–4151CrossRefGoogle Scholar
  3. 3.
    Nanda AK, Wicks DA (2006) The influence of the ionic concentration, concentration of the polymer, degree of neutralization and chain extension on aqueous polyurethane dispersions prepared by the acetone process. Polymer 47:1805–1811CrossRefGoogle Scholar
  4. 4.
    Yen MS, Tsai PY, Hong PD (2006) The solution properties and membrane properties of polydimethylsiloxane waterborne polyurethane blended with the waterborne polyurethanes of various kinds of soft segments. Colloid Surfaces A 279:1–9CrossRefGoogle Scholar
  5. 5.
    Furukawa M, Hamada Y, Kojio K (2003) Aggregation structure and mechanical properties of functionally graded polyurethane elastomers. J Polym Sci Polym Phys 41:2355–2364CrossRefGoogle Scholar
  6. 6.
    García SJ, Fischer HR, Van Der Zwaag S (2011) A critical appraisal of the potential of self healing polymeric coatings. Prog Org Coat 72:211–221CrossRefGoogle Scholar
  7. 7.
    Chattopadhyay DK, Raju K (2007) Structural engineering of polyurethane coatings for high performance applications. Prog Polym Sci 32:352–418CrossRefGoogle Scholar
  8. 8.
    Akbarian M, Olya ME, Ataeefard M, Mahdavian M (2012) The influence of nanosilver on thermal and antibacterial properties of a 2K waterborne polyurethane coating. Prog Org Coat 75:344–348CrossRefGoogle Scholar
  9. 9.
    Kumar GS (1987) Biodegradable polymers: prospects and progress. Dekker, New YorkGoogle Scholar
  10. 10.
    Han ZD, Fina A (2011) Thermal conductivity of carbon nanotubes and their polymer nanocomposites: a review. Prog Polym Sci 36:914–944CrossRefGoogle Scholar
  11. 11.
    Chen HY, Ginzburg VV, Yang J, Yang YF, Liu W, Huang Y, Du LB, Chen B (2016) Thermal conductivity of polymer-based composites: fundamentals and applications. Prog Polym Sci 59:41–85CrossRefGoogle Scholar
  12. 12.
    Schwartz G, Tee BCK, Mei JG, Appleton AL, Kim DH, Wang HL, Bao ZN (2013) Flexible polymer transistors with high pressure sensitivity for application in electronic skin and health monitoring. Nat Commun 4:1859–1866CrossRefPubMedGoogle Scholar
  13. 13.
    Yousefi N, Sun XY, Lin XY, Shen X, Jia JJ, Zhang B, Tang BZ, Chan MS, Kim JK (2014) Highly aligned graphene/polymer nanocomposites with excellent dielectric properties for high-performance electromagnetic interference shielding. Adv Mater 26:5480–5487CrossRefPubMedGoogle Scholar
  14. 14.
    Bloor D, Graham A, Williams EJ, Laughlin PJ, Lussey D (2006) Metal-polymer composite with nanostructured filler particles and amplified physical properties. Appl Phys Lett 88:102103–102108CrossRefGoogle Scholar
  15. 15.
    Xiong M, Wu L, Zhou S, You B (2002) Preparation and characterization of acrylic latex/nano-SiO2 composites. Polym Int 51:693–698CrossRefGoogle Scholar
  16. 16.
    Jena KK, Sahoo S, Narayan R, Aminabhavi TM, Raju KVSN (2011) Novel hyperbranched waterborne polyurethane-urea/silica hybrid coatings and their characterizations. Polym Int 60:1504–1513CrossRefGoogle Scholar
  17. 17.
    Luo X, Zhang P, Liu R, Li W, Ge B, Cao M (2016) Preparation and physical properties of functionalized graphene/waterborne polyurethane UV-curing composites by click chemistry. Polym Int 65:415–422CrossRefGoogle Scholar
  18. 18.
    Hajializadeh S, Barikani M, Bellah SM (2017) Synthesis and characterization of multiwall carbon nanotube/waterborne polyurethane nanocomposites. Polym Int 66:1074–1083CrossRefGoogle Scholar
  19. 19.
    Giri A, Hopkins PE, Wessel JG, Duda JC (2015) Kapitza resistance and the thermal conductivity of amorphous superlattices. J Appl Phys 118(165303):1–6Google Scholar
  20. 20.
    McNamara AJ, Joshi Y, Zhang ZM (2015) Thermal resistance of thermal conductive adhesive anchored carbon nanotubes interface material. Int J Therm Sci 96:221–226CrossRefGoogle Scholar
  21. 21.
    Kim GH, Lee DW, Shanker A, Shao L, Kwon MS, Gidley D, Kim JS, Pipe KP (2015) High thermal conductivity in amorphous polymer blends by engineered interchain interactions. Nat Mater 14:295–300CrossRefPubMedGoogle Scholar
  22. 22.
    Li R, Shan ZH (2017) Research on structural features and thermal conductivity of waterborne polyurethane. Prog Org Coat 104:271–279CrossRefGoogle Scholar
  23. 23.
    Li R, Shan ZH (2018) Enhancement of thermal conductivity of PEG-PPG-based waterborne polyurethane coating by incorporating ordered polyethylene glycol fragment. Polym Test 69:125–132.  https://doi.org/10.1016/j.polymertesting.2018.05.024 CrossRefGoogle Scholar
  24. 24.
    Chen SA, Chan WC (1990) Polyurethane cationomers. II. Phase inversion and its effect on physical properties. J Polym Sci Polym Phys 28:1515–1532CrossRefGoogle Scholar
  25. 25.
    Yang JH, Chun BC, Chung YC, Cho JH (2003) Comparison of thermal/mechanical properties and shape memory effect of polyurethane block-copolymers with planar or bent shape of hard segment. Polymer 44:3251–3258CrossRefGoogle Scholar
  26. 26.
    Marcos-Fernández A, Abraham GA, Valentín JL, San Román J (2006) Synthesis and characterization of biodegradable non-toxic poly (ester-urethane-urea) s based on poly (ε-caprolactone) and amino acid derivatives. Polymer 47:785–798CrossRefGoogle Scholar
  27. 27.
    Petrović ZS, Zavargo Z, Flyn JH, Macknight WJ (1994) Thermal degradation of segmented polyurethanes. J Appl Polym Sci 51:1087–1095CrossRefGoogle Scholar
  28. 28.
    Wen TC, Wang YJ, Cheng TT, Yang CH (1999) The effect of DMPA units on ionic conductivity of PEG–DMPA–IPDI waterborne polyurethane as single-ion electrolytes. Polymer 40:3979–3988CrossRefGoogle Scholar
  29. 29.
    Sormana JL, Meredith JC (2004) High-throughput discovery of structure-mechanical property relationships for segmented poly(urethane-urea)s. Macromolecules 37:2186–2195CrossRefGoogle Scholar
  30. 30.
    Lee BS, Chun BC, Chung YC, Sul KI, Cho JW (2001) Structure and thermomechanical properties of polyurethane block copolymers with shape memory effect. Macromolecules 34:6431–6437CrossRefGoogle Scholar
  31. 31.
    Subramani S, Park YJ, Cheong IW, Kim PJH (2004) Polyurethane ionomer dispersions from a blocked aromatic-diisocyanate prepolymer. Polym Int 53:1145–1152CrossRefGoogle Scholar
  32. 32.
    Lu Y, Tighzert L, Dole P, Erre D (2005) Preparation and properties of starch thermoplastics modified with waterborne polyurethane from renewable resources. Polymer 46:9863–9870CrossRefGoogle Scholar
  33. 33.
    Kim BS, Kim BK (2005) Enhancement of hydrolytic stability and adhesion of waterborne polyurethanes. J Appl Polym Sci 97:1961–1969CrossRefGoogle Scholar
  34. 34.
    Princi E, Vicini S, Castro K, Capitani D, Proietti N, Mannin L (2009) On the micro-phase separation in waterborne polyurethanes. Macromol Chem Phys 210:879–889CrossRefGoogle Scholar
  35. 35.
    Wu Z, Wang H, Tian X, Cui P, Ding X, Ye X (2014) The effects of polydimethylsiloxane on transparent and hydrophobic waterborne polyurethane coatings containing polydimethylsiloxane. Phys Chem Chem Phys 16:6787–6794CrossRefPubMedGoogle Scholar
  36. 36.
    Zhang SW, Jiang JQ, Yang C, Chen MQ, Liu XY (2011) Facile synthesis of waterborne UV-curable polyurethane/silica nanocomposites and morphology, physical properties of its nanostructured films. Prog Org Coat 70:1–8CrossRefGoogle Scholar
  37. 37.
    ASTM Standard E1225 (2009) Standard Test Method for Thermal Conductivity of Solids by Means of the Guarded-Comparative-Longitudinal Heat Flow Technique. (2003) ASTM International, West Conshohocken. PAGoogle Scholar
  38. 38.
    ASTM Standard D5470, 2012, “Standard Test Method for Thermal Transmission Properties of Thermally Conductive Electrical Insulation Materials,” (2003) ASTM International, West Conshohocken, PAGoogle Scholar
  39. 39.
    Cai D, Song M (2008) Latex technology as a simple route to improve the thermal conductivity of a carbon nanotube/polymer composite. Carbon 46:2107–2112CrossRefGoogle Scholar
  40. 40.
    Yavari F, Fard HR, Pashayi K, Rafiee MA, Zamiri A, Yu ZZ, Ozisik R, Borca-Tasciuc T, Koratkar N (2011) Enhanced thermal conductivity in a nanostructured phase change composite due to low concentration graphene additives. J Phys Chem C 115:8753–8758CrossRefGoogle Scholar
  41. 41.
    Kuan HC, Ma CCM, Chang WP, Yuen SM, Wu HH, Lee TM (2005) Synthesis, thermal, mechanical and rheological properties of multiwall carbon nanotube/waterborne polyurethane nanocomposite. Compos Sci Technol 65:1703–1710CrossRefGoogle Scholar
  42. 42.
    Liu T, Li Z, Wu Q, Ma XS (2010) Synthesis of nanocolorants with crosslinked shell by miniemulsion polymerization stabilized by waterborne polyurethane. Polym Bull 64:511–521CrossRefGoogle Scholar
  43. 43.
    Pan H, Chen D (2007) Preparation and characterization of waterborne polyurethane/attapulgite nanocomposites. Eur Polym J 43:3766–3772CrossRefGoogle Scholar
  44. 44.
    Zhang LB, Wang JQ, Wang HG, Xu Y, Wang ZF, Li ZP, Mi YJ, Yang SR (2012) Preparation, mechanical and thermal properties of functionalized graphene/polyimide nanocomposites. Compos Part A-Appl S 43:1537–1545CrossRefGoogle Scholar

Copyright information

© Springer Nature B.V. 2018

Authors and Affiliations

  1. 1.The Key Laboratory of Leather Chemistry and Engineering, Ministry of EducationSichuan UniversityChengduChina
  2. 2.College of Light Industry, Textile and Food EngineeringSichuan UniversityChengduChina

Personalised recommendations