Radical Degradation Processes Initiated by Catalytic Nanoparticles of CoFe2O4 Towards Polymer Waste Application

  • Dario Espino
  • Yaara Haruvy-Manor
  • Yossef Bar
  • Yitzhak Mastai
Original Paper
First Online:
  • 11 Downloads

Abstract

Polymer waste presents a modern environmental challenge due to the long-term stability of these materials. Elastomer-based polymers (e.g., tires, pipelines and shoes) are unique in comprising numerous double bonds, which are typically sensitive to radical-initiated oxidative degradation leading to the scission of polymer chains. In this paper, we propose a new approach for radical-initiated oxidative degradation of polymers using cobalt ferrite (CoFe2O4) nanoparticles (NPs). We show that magnetic CoFe2O4 NPs can effectively catalyze the oxidative degradation of polybutadiene (PB), offering easy magnetic recycling and reuse without affecting their catalytic efficiency. The CoFe2O4 NPs were synthesized via a facile surfactant-free method based on a sonochemical reaction. We used methyl ethyl ketone peroxide (MEKP), a model system, to study the rate of radical decomposition catalyzed by the NPs. The radical decomposition rates were determined by following the discoloration of methylene blue (MB) using ultraviolet–visible (UV/Vis) spectroscopy; electron paramagnetic resonance (EPR) measurements were used to study radical formation. The radical-initiated oxidative degradation of PB was studied by thermogravimetric analysis with mass spectrometry detection (TGA–MS). Our results show that cobalt ferrite NPs lead to formation of polymers with low molecular weight fragments and crosslinking, indicating that these NPs are very effective catalysts for the radical degradation of PB. CoFe2O4 NPs are potentially suitable for other polymers, hence this approach may provide a novel route for the chemical (tertiary) recycling of polymers.

Keywords

Sonochemistry Radical degradation Nanoparticles Elastomer-based polymers Magnetic CoFe2O4 Chemical recycling of polymers 
This is a preview of subscription content, log in to check access

Notes

Acknowledgements

We would like to acknowledge Dr. Ronit Lavi for her help and guidance in EPR measurements, Dr. Michal Weitman for assistance with the TGA–MS measurements, and our research group for their support in this work.

Supplementary material

10924_2018_1222_MOESM1_ESM.docx (288 kb)
Supplementary material 1 (DOCX 258 KB)

References

  1. 1.
    Al-Salem SM, Lettieri P, Baeyens J (2009) Recycling and recovery routes of plastic solid waste (PSW): a review. Waste Manag 29.10:2625–2643CrossRefGoogle Scholar
  2. 2.
    Adhikari B, De D, Maiti S (2000) Reclamation and recycling of waste rubber. Progr Polym Sci 25.7:909–948.CrossRefGoogle Scholar
  3. 3.
    Khan M, Sohail M, Khattak NS(2016) Conversion of mixed low-density polyethylene wastes into liquid fuel by novel CaO/SiO2 catalyst. J Polym Environ 24.3:255–263CrossRefGoogle Scholar
  4. 4.
    Shah J, Jan MR, Mabood F (2007) Catalytic conversion of waste tyres into valuable hydrocarbons. J Polym Environ 15.3:207–211.‏CrossRefGoogle Scholar
  5. 5.
    Li H (2010) Metal-catalyzed oxidation of polybutadiene in oxygen scavenging packaging applications. DissertationGoogle Scholar
  6. 6.
    Wise J, Gillen KT, Clough RL (1997) Quantitative model for the time development of diffusion-limited oxidation profiles. Polymer 38(8):1929–1944.CrossRefGoogle Scholar
  7. 7.
    Sheldon RA, Kochi JK (1981) Metal-catalyzed oxidations of organic compounds: mechanistic principles. Academic Press, New YorkGoogle Scholar
  8. 8.
    Panda AK, Singh RK, Mishra DK (2010) Thermolysis of waste plastics to liquid fuel: a suitable method for plastic waste management and manufacture of value added products—a world prospective. Renew Sustain Energy Rev 14(1):233–248.CrossRefGoogle Scholar
  9. 9.
    Chaturvedi S, Dave PN, Shah NK (2012) Applications of nano-catalyst in new era. J Saudi Chem Soc 16.3:307–325.CrossRefGoogle Scholar
  10. 10.
    Serrano DP, Aguado J, Rodríguez JM (2002) Nanocrystalline ZSM-5: a highly active catalyst for polyolefin feedstock recycling. Stud Surf Sci Catal 142:77–84.‏CrossRefGoogle Scholar
  11. 11.
    Aguado J et al (2001) Influence of the operating variables on the catalytic conversion of a polyolefin mixture over HMCM-41 and nanosized HZSM-5. Ind Eng Chem Res 40:5696–5704.‏‏ 24)CrossRefGoogle Scholar
  12. 12.
    Mastral JF et al (2006) Catalytic degradation of high density polyethylene over nanocrystalline HZSM-5 zeolite. Polym Degrad Stab 91(12):3330–3338.CrossRefGoogle Scholar
  13. 13.
    Marczewski M et al (2013) Catalytic decomposition of polystyrene. The role of acid and basic active centers. Appl Catal B 129:236–246.CrossRefGoogle Scholar
  14. 14.
    Xie C et al (2008) Study on catalytic pyrolysis of polystyrene over base modified silicon mesoporous molecular sieve. Catal Commun 9(6):1132–1136.CrossRefGoogle Scholar
  15. 15.
    Ramli A, Abu Bakar DR(2011) Effect of calcination method on the catalytic degradation of polystyrene using Al2O3 supported Sn and Cd catalysts. J Appl Sci 11:1346–1350.‏CrossRefGoogle Scholar
  16. 16.
    Thomas RT, Sandhyarani N (2013) Enhancement in the photocatalytic degradation of low density polyethylene–TiO2 nanocomposite films under solar irradiation. RSC Adv 3(33):14080–14087.‏CrossRefGoogle Scholar
  17. 17.
    Bhatia M et al (2013) Implicating nanoparticles as potential biodegradation enhancers: a review. J Nanomed Nanotechol 4(175):2Google Scholar
  18. 18.
    Kooti M, Afshari M (2012) Magnetic cobalt ferrite nanoparticles as an efficient catalyst for oxidation of alkenes. Sci Iran 19(6):1991–1995.CrossRefGoogle Scholar
  19. 19.
    Turtelli RS et al (2008) Magnetic properties of nanocrystalline CoFe2O4 synthesized by modified citrate-gel method. J Magn Magn Mater 320:e339–e342Google Scholar
  20. 20.
    Senapati K, Kamal C, Borgohain, Phukan P (2011) Synthesis of highly stable CoFe2O4 nanoparticles and their use as magnetically separable catalyst for Knoevenagel reaction in aqueous medium. J Mol Catal A: Chem 339(1–2):24–31.CrossRefGoogle Scholar
  21. 21.
    Güven O (2012) Crosslinking and scission in polymers, vol 292. Springer, New YorkGoogle Scholar
  22. 22.
    Janowska G, Janczak T (1990) Effect of metal with variable valence on the thermal properties of polybutadiene. J Therm Anal Calorim 36(3):901–914.CrossRefGoogle Scholar
  23. 23.
    Chodak I, Rado R (1975) Polymer crosslinking by a bimolecular peroxide decomposition. J Polym Sci: Polym Symp 53(1):133–140‏Google Scholar
  24. 24.
    Goswami PP et al (2013) Sonochemical synthesis of cobalt ferrite nanoparticles. Int J Chem Eng.  https://doi.org/10.1155/2013/934234 Google Scholar
  25. 25.
    Vijayakumar R et al (2000) Sonochemical synthesis and characterization of pure nanometer-sized Fe3O4 particles. Mater Sci Eng A 286(1):101–105.CrossRefGoogle Scholar
  26. 26.
    Chithambararaj A et al (2013) Flower-like hierarchical h-MoO3: new findings of efficient visible light driven nano photocatalyst for methylene blue degradation. Catal Sci Technol 3(5):1405–1414.‏‏CrossRefGoogle Scholar
  27. 27.
    Lee J-E et al (2015) Fabrication of Au/GO/ZnO composite nanostructures with excellent photocatalytic performance. Mater Chem Phys 164:29–35.CrossRefGoogle Scholar
  28. 28.
    Buettner GR (1987) Spin trapping: ESR parameters of spin adduct 1474 1528V. Free Radic Biol Med 3(4):259–303.CrossRefGoogle Scholar
  29. 29.
    Maaz K et al (2007) Synthesis and magnetic properties of cobalt ferrite (CoFe2O4) nanoparticles prepared by wet chemical route. J Magn Magn Mater 308(2):289–295‏‏CrossRefGoogle Scholar
  30. 30.
    El-Okr MM et al (2011) Synthesis of cobalt ferrite nano-particles and their magnetic characterization. J Magn Magn Mater 323(7):920–926CrossRefGoogle Scholar
  31. 31.
    Abadie MJM, Mekhissi K, Burchill PJ (2002) Effects of processing conditions on the curing of a vinyl ester resin. J Appl Polym Sci 84(6):1146–1154CrossRefGoogle Scholar
  32. 32.
    Beyler CL, Hirschler MM (2002) Thermal decomposition of polymers. SFPE Handb Fire Prot Eng 2:111–131Google Scholar
  33. 33.
    Golub MA, Gargiulo RJ (1972) Thermal degradation of 1, 4-polyisoprene and 1, 4-polybutadiene. J Polym Sci Part C: Polym Lett 10(1):41–49Google Scholar
  34. 34.
    Chen F, Qian J (2003) Studies of the thermal degradation of waste rubber. Waste Manag 23(6):463–467CrossRefGoogle Scholar
  35. 35.
    Cullis CF, Laver HS (1978) The thermal degradation and oxidation of polybutadiene. Eur Polym J 14(8):571–573CrossRefGoogle Scholar

Copyright information

© Springer Science+Business Media, LLC, part of Springer Nature 2018

Authors and Affiliations

  1. 1.Department of Chemistry and Bar-Ilan Institute for Nanotechnology and Advanced Materials (BINA)Bar Ilan UniversityRamat GanIsrael
  2. 2.Soreq Nuclear Research Center (SNRC)YavneIsrael

Personalised recommendations